Instrukcja obsługi Makita DUX18Z


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita DUX18Z (20 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/20
INSTRUCTION MANUAL
Cordless Multi Function Power Head
DUX18
ENGLISH: Original instructions
Read before use.
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DUX18
No load speed
(without attachment)
Low 0 - 6,800 min-1
High 0 - 9,700 min-1
Overall length 977 mm
Rated voltage D.C. 18 V
Net weight 4.0 kg - 10.3 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydierfromcountrytocountry.
• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Batterycartridge BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH
• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof
residence.
WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges
andchargersmaycauseinjuryand/orre.
Recommended portable power pack
Portable power pack PDC01
• Theportablepowerpack(s)listedabovemaynotbeavailabledependingonyourregionofresidence.
• Beforeusingtheportablepowerpack,readinstructionandcautionarymarkingsontheportablepowerpack.
No load speed with attachment
Model Rotation speed
Low High
EM408MP, EM409MP 0 - 5,000 min
-1 0 - 7,000 min-1
EN401MP, EN410MP, EN420MP
(Strokes per minute)
0 - 2,800 min-1 0 - 4,000 min-1
EY401MP (chain speed) 0 - 14 m/s 0 - 20 m/s
KR400MP 0 - 200 min-1 0 - 280 min-1
KR401MP 0 - 160 min-1 0 - 230 min-1
EE400MP 0 - 3,300 min-1 0 - 4,700 min-1
EJ400MP 0 - 2,000 min-1 0 - 2,800 min-1
BR400MP 0 - 160 min-1 0 - 230 min-1
SW400MP 0 - 160 min-1 0 - 230 min-1
UB400MP 0 - 6,100 min-1 0 - 6,700 min-1
3 ENGLISH
Approved attachment
Type Model
Grass trimmer attachment EM408MP, EM409MP
Hedge trimmer attachment EN401MP, EN410MP
Ground trimmer attachment EN420MP
Pole saw attachment EY401MP
Cultivator attachment KR400MP, KR401MP
Edger attachment EE400MP
Coeeharvesterattachment EJ400MP
Shaft extension attachment LE400MP
Power brush attachment BR400MP
Power sweep attachment SW400MP
Blower attachment UB400MP
Symbols
Thefollowingsshowthesymbolswhichmaybeused
fortheequipment.Besurethatyouunderstandtheir
meaning before use.
Read instruction manual.
Take particular care and attention.
Do not expose to moisture.
Ni-MH
Li-ion
OnlyforEUcountries
Do not dispose of electric equipment or
batterypacktogetherwithhousehold
waste material! In observance of the
European Directives, on Waste Electric
and Electronic Equipment and Batteries
and Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws, electric
equipmentandbatteriesandbattery
pack(s) that have reached the end of
theirlifemustbecollectedseparatelyand
returnedtoanenvironmentallycompatible
recyclingfacility.
Intended use
This cordless multi function power head is intended for
driving an approved attachment listed in the section
"SPECIFICATIONS" of this instruction manual. Never
use the unit for the other purpose.
WARNING: Read the instruction manual of
the attachment as well as this instruction manual
before using. Failure to follow the warnings and
instructionsmayresultseriousinjury.


Specyfikacje produktu

Marka: Makita
Kategoria: Niesklasyfikowane
Model: DUX18Z

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Makita DUX18Z, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Makita

Makita

Makita MR007GZ Instrukcja

12 Stycznia 2025
Makita

Makita TW010G Instrukcja

7 Stycznia 2025
Makita

Makita CV101D Instrukcja

17 Grudnia 2024
Makita

Makita UT002G Instrukcja

17 Grudnia 2024
Makita

Makita UN001G Instrukcja

9 Października 2024
Makita

Makita TM001G Instrukcja

9 Października 2024
Makita

Makita DCG180RTB Instrukcja

9 Października 2024
Makita

Makita DEAADP08 Instrukcja

7 Października 2024
Makita

Makita ADP05 Instrukcja

5 Października 2024
Makita

Makita DC4001 Instrukcja

5 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane