Instrukcja obsługi Makita DTW251Z
Makita
Maszyna do śrub
DTW251Z
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita DTW251Z (12 stron) w kategorii Maszyna do śrub. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
IMPORTANT: Read Before Using.
Cordless Impact Wrench
DTW250
DTW251
007450
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model DTW250 DTW251
Standard bolt M10 - M16 M10 - M16
Capacities High tensile bolt M10 - M14 M10 - M14
Square drive 12.7 mm 12.7 mm
No load speed (min-1) 0 - 2,200 0 - 2,100
Impacts per minute 0 - 3,200 0 - 3,200
Max. fastening torque 230 N.m 230 N.m
Overall length 165 mm 165 mm
Net weight 1.6 kg 1.5 kg
Rated voltage D.C.14.4 V D.C.18 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END004-4
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE036-1
Intended use
The tool is intended for fastening bolts and nuts.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model DTW250
Sound pressure level (L
pA) : 90 dB (A)
Sound power level (L
WA) : 101 dB (A)
Uncertainty (K) : 3 dB (A)
Model DTW251
Sound pressure level (L
pA) : 94 dB (A)
Sound power level (L
WA) : 105 dB (A)
Uncertainty (K) : 3 dB (A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model DTW250
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (ah) : 14.5 m/s2
Uncertainty (K) : 1.5 m/s2
Model DTW251
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (ah) : 11.0 m/s2
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
•
The vibration emission during actual use of the power
tool can differ from the declared emission value
depending on the ways in which the tool is used.
Cd
Ni-MH
Li-ion
3
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-17
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Impact Wrench
Model No./ Type: DTW250, DTW251
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
Standard or standardized documents:
EN60745
The Technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
31.12.2013
000331
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
GEA006-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.
Personal safety
10. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or
medication. A moment of inattention while
operating power tools may result in serious
personal injury.
11. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
12. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
your finger on the switch or energising power tools
that have the switch on invites accidents.
13. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
14. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
Specyfikacje produktu
| Marka: | Makita |
| Kategoria: | Maszyna do śrub |
| Model: | DTW251Z |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Makita DTW251Z, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do śrub Makita
12 Października 2024
5 Października 2024
4 Października 2024
4 Października 2024
2 Października 2024
1 Października 2024
27 Września 2024
24 Września 2024
22 Września 2024
21 Września 2024
Instrukcje Maszyna do śrub
- Maszyna do śrub AEG
- Maszyna do śrub Worx
- Maszyna do śrub Kawasaki
- Maszyna do śrub Milwaukee
- Maszyna do śrub Bosch
- Maszyna do śrub Yato
- Maszyna do śrub Parkside
- Maszyna do śrub Toolcraft
- Maszyna do śrub Festool
- Maszyna do śrub Panasonic
- Maszyna do śrub StarTech.com
- Maszyna do śrub Bavaria By Einhell
- Maszyna do śrub SW-Stahl
- Maszyna do śrub Stanley
- Maszyna do śrub Black & Decker
- Maszyna do śrub Hazet
- Maszyna do śrub DeWalt
- Maszyna do śrub Einhell
- Maszyna do śrub Silverline
- Maszyna do śrub Ozito
- Maszyna do śrub RYOBI
- Maszyna do śrub Chicago Pneumatic
- Maszyna do śrub GO/ON
- Maszyna do śrub DEDRA
- Maszyna do śrub Hilti
- Maszyna do śrub Rodcraft
- Maszyna do śrub BaseTech
- Maszyna do śrub Dremel
- Maszyna do śrub Meec Tools
- Maszyna do śrub Güde
- Maszyna do śrub Bavaria
- Maszyna do śrub Carrera
- Maszyna do śrub Beta
- Maszyna do śrub Fein
- Maszyna do śrub Hitachi
- Maszyna do śrub Craftsman
- Maszyna do śrub Matrix
- Maszyna do śrub Fieldmann
- Maszyna do śrub PowerPlus
- Maszyna do śrub Alpha Tools
- Maszyna do śrub Vonroc
- Maszyna do śrub HiKOKI
- Maszyna do śrub Wiha
- Maszyna do śrub Porter-Cable
- Maszyna do śrub Metabo
- Maszyna do śrub Skil
- Maszyna do śrub Pansam
- Maszyna do śrub Toolland
- Maszyna do śrub Tacklife
- Maszyna do śrub Senco
- Maszyna do śrub Maktec
- Maszyna do śrub Steren
- Maszyna do śrub Power Craft
- Maszyna do śrub Kraftwerk
- Maszyna do śrub Kress
- Maszyna do śrub Urrea
- Maszyna do śrub Truper
- Maszyna do śrub Bruder Mannesmann
- Maszyna do śrub Meister Craft
- Maszyna do śrub Batavia
- Maszyna do śrub Elu
- Maszyna do śrub Sthor
- Maszyna do śrub Gedore
- Maszyna do śrub Cleco
- Maszyna do śrub Einhell Bavaria
- Maszyna do śrub Wera
- Maszyna do śrub Ingersoll Rand
- Maszyna do śrub Facom
- Maszyna do śrub TAURUS Titanium
Najnowsze instrukcje dla Maszyna do śrub
10 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024