Instrukcja obsługi Makita DTW1001Z

Makita Maszyna do śrub DTW1001Z

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita DTW1001Z (16 stron) w kategorii Maszyna do śrub. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
INSTRUCTION MANUAL
Cordless Impact Wrench
DTW1001
DTW1002
DTW800
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: DTW1001 DTW1002 DTW800
Fastening
capacities
Standard bolt M12 - M30 M12 - M24
High tensile
bolt
M10 - M24 M10 - M22
Square drive 19 mm 12.7 mm –
Drive shank 11.1 mm Hex.–
No load speed Impact mode
(Hard)
0 - 1,800 min-1
Impact mode
(Medium)
0 - 1,000 min-1
Impact mode
(Soft)
0 - 900 min-1
Impacts per
minute
Impact mode
(Hard)
0 - 2,200 min-1
Impact mode
(Medium)
0 - 2,000 min-1
Impact mode
(Soft)
0 - 1,800 min-1
Overall length 229 mm
Rated voltage D.C. 18 V
Battery cartridge BL1815N,
BL1820,
BL1820B
BL1830,
BL1840,
BL1850,
BL1840B,
BL1850B
BL1815N,
BL1820,
BL1820B
BL1830,
BL1840,
BL1850,
BL1840B,
BL1850B
BL1815N,
BL1820,
BL1820B
BL1830,
BL1840,
BL1850,
BL1840B,
BL1850B
Net weight 3.4 kg 3.7 kg 3.3 kg 3.6 kg 3.4 kg 3.7 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Weight,withbatterycartridge,accordingtoEPTA-Procedure01/2003
Symbols
Thefollowingshowthesymbolsusedfortheequip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Cd
Ni-MH
Li-ion
OnlyforEUcountries
Do not dispose of electric equipment or
battery pack together with household waste
material!
InobservanceoftheEuropeanDirectives,
onWasteElectricandElectronic
EquipmentandBatteriesandAccumulators
andWasteBatteriesandAccumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
Thetoolisintendedforfasteningboltsandnuts.
ModelDTW800:Thetoolisalsointendedfordrilling
into wood.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ingtoEN60745:
Model DTW1001
Sound pressure level (L
pA):98dB(A)
Sound power level (L
WA):109dB(A)
Uncertainty(K):3dB(A)
Model DTW1002
Sound pressure level (L
pA):97dB(A)
Sound power level (L
WA):108dB(A)
Uncertainty(K):3dB(A)
Model DTW800
Sound pressure level (L
pA):95dB(A)
Sound power level (L
WA):106dB(A)
Uncertainty(K):3dB(A)
WARNING: Wear ear protection.
Vibration
Thevibrationtotalvalue(tri-axialvectorsum)deter-
minedaccordingtoEN60745:
Model DTW1001
Workmode:impacttighteningoffastenersofthemaxi-
mum capacity of the tool
Vibration emission (a
h):15.5m/s2
Uncertainty(K):2.0m/s
2
3 ENGLISH
Model DTW1002
Workmode:impacttighteningoffastenersofthemaxi-
mum capacity of the tool
Vibration emission (ah):18.0m/s2
Uncertainty(K):1.5m/s2
Model DTW800
Workmode:impacttighteningoffastenersofthemaxi-
mum capacity of the tool
Vibration emission (ah):24.0m/s2
Uncertainty(K):2.0m/s2
Workmode:drillingintowood
Vibration emission (ah):7.0m/s2
Uncertainty(K):1.5m/s2
NOTE:Thedeclaredvibrationemissionvaluehas
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE:Thedeclaredvibrationemissionvalue
may also be used in a preliminary assessment of
exposure.
WARNING:
Thevibrationemissionduringactual
use of the power tool can differ from the declared emission
value depending on the ways in which the tool is used.
WARNING: Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
MakitadeclaresthatthefollowingMachine(s):
DesignationofMachine:CordlessImpactWrench
ModelNo./Type:DTW1001,DTW1002,DTW800
ConformstothefollowingEuropeanDirectives:2006/42/EC
Theyaremanufacturedinaccordancewiththefollowing
standardorstandardizeddocuments:EN60745
Thetechnicalleinaccordancewith2006/42/ECis
availablefrom:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
13.5.2015
Yasushi Fukaya
Director
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
General power tool safety warnings
WARNING: Read all safety warnings and
all instructions. Failure to follow the warnings and
instructionsmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
Theterm"powertool"inthewarningsreferstoyour
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust.Powertoolscreatesparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators.Thereisanincreasedriskofelec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions.Waterenteringapowertoolwillincrease
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use.Useof
a cord suitable for outdoor use reduces the risk of
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.UseofanRCDreduces
the risk of electric shock.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication.Amomentofinattentionwhileoperating
powertoolsmayresultinseriouspersonalinjury.
2. Use personal protective equipment. Always
wear eye protection.Protectiveequipmentsuch
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
willreducepersonalinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
yourngerontheswitchorenergisingpowertools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on.Awrenchorakeyleft
attached to a rotating part of the power tool may
resultinpersonalinjury.
5. Do not overreach. Keep proper footing and
balance at all times.Thisenablesbettercontrol
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing, and
gloves away from moving parts. Loose clothes,

Specyfikacje produktu

Marka: Makita
Kategoria: Maszyna do śrub
Model: DTW1001Z

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Makita DTW1001Z, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do śrub Makita

Makita

Makita DDF448Y1J Instrukcja

22 Grudnia 2024
Makita

Makita DDF446RTJ Instrukcja

22 Grudnia 2024
Makita

Makita DDA350Y1J Instrukcja

22 Grudnia 2024
Makita

Makita DHP448 Instrukcja

12 Października 2024
Makita

Makita 6906J Instrukcja

5 Października 2024
Makita

Makita DTW300Z Instrukcja

4 Października 2024
Makita

Makita DA3000V Instrukcja

4 Października 2024
Makita

Makita DTWA190Z Instrukcja

2 Października 2024
Makita

Makita 6952 Instrukcja

1 Października 2024
Makita

Makita TD090D Instrukcja

27 Września 2024

Instrukcje Maszyna do śrub

Najnowsze instrukcje dla Maszyna do śrub

Fuxtec

Fuxtec FX-E1IW20 Instrukcja

13 Stycznia 2025
Hazet

Hazet 9012EL-SPC Instrukcja

12 Stycznia 2025
RYOBI

RYOBI One+ R18IW3 Instrukcja

11 Stycznia 2025
MSW

MSW -ACW700 Instrukcja

10 Stycznia 2025
RYOBI

RYOBI PCL250 Instrukcja

4 Stycznia 2025
RYOBI

RYOBI PCL212 Instrukcja

4 Stycznia 2025
RYOBI

RYOBI One+ RSD18 Instrukcja

3 Stycznia 2025
Hazet

Hazet 9212SPC-010 Instrukcja

1 Stycznia 2025
Hazet

Hazet 6004CT-3 Instrukcja

1 Stycznia 2025
Hazet

Hazet 6001-1.5/3 Instrukcja

1 Stycznia 2025