Instrukcja obsługi Makita DTDA070Z

Makita Maszyna do śrub DTDA070Z

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita DTDA070Z (16 stron) w kategorii Maszyna do śrub. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

INSTRUCTION MANUAL

Cordless Impact Driver

DTDA040

DTDA070

DTDA100

DTDA140

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DTDA040 DTDA070 DTDA100 DTDA140

Fastening capacities Standard bolt M5 - M10 M5 - M12 M6 - M16

High tensile bolt M5 - M8 M5 - M10 M6- M12

Maximum fastening torque 35 N•m 65 N•m 95 N•m 140 N•m

Torque range Approx.

3 - 20 N•m

Approx.

5 - 40 N•m

Approx.

6 - 65 N•m

Approx.

18 - 80 N•m

No load speed (RPM) 0 - 2,400 min-1 0 - 2,500 min-1 0 - 2,700 min-1

Impacts per minute 0 - 3,700 min

-1 0 - 3,300 min-1

Rated voltage D.C. 14.4 V

Overall length 139 mm 146 mm

Net weight 1.1 - 1.4 kg 1.2 - 1.4 kg 1.2 - 1.5 kg

• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange

without notice.

• Specicationsmaydifferfromcountrytocountry.

• Theweightmaydifferdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Applicable battery cartridge and charger

Batterycartridge BL1415N / BL1415NA / BL1430 / BL1430B / BL1440 / BL1450 /

BL1460A / BL1460B

Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /

DC18SH

• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof

residence.

WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges

andchargersmaycauseinjuryand/orre.

Symbols

Thefollowingsshowthesymbolsusedfortheequip-

ment.Besurethatyouunderstandtheirmeaningbefore

use.

Read instruction manual.

Ni-MH

Li-ion

OnlyforEUcountries

Do not dispose of electric equipment or

batterypacktogetherwithhouseholdwaste

material!

In observance of the European Directives,

on Waste Electric and Electronic

Equipment and Batteries and Accumulators

and Waste Batteries and Accumulators

and their implementation in accordance

with national laws, electric equipment and

batteriesandbatterypack(s)thathave

reached the end of their life must be col-

lectedseparatelyandreturnedtoanenvi-

ronmentallycompatiblerecyclingfacility.

Intended use

The tool is intended for screw driving in wood, metal

and plastic.

Noise

ThetypicalA-weightednoiseleveldeterminedaccord-

ing to EN62841-2-2:

Model DTDA040

Sound pressure level (L

pA) : 90 dB(A)

Sound power level (L

WA) : 101 dB (A)

Uncertainty(K):3dB(A)

Model DTDA070

Sound pressure level (L

pA) : 92 dB(A)

Sound power level (L

WA) : 103 dB (A)

Uncertainty(K):3dB(A)

Model DTDA100

Sound pressure level (L

pA) : 94 dB(A)

Sound power level (L

WA) : 105 dB (A)

Uncertainty(K):3dB(A)

Model DTDA140

Sound pressure level (L

pA) : 94 dB(A)

Sound power level (L

WA) : 105 dB (A)

Uncertainty(K):3dB(A)

NOTE: The declared noise emission value(s) has

been measured in accordance with a standard test

methodandmaybeusedforcomparingonetoolwith

another.

NOTE: The declared noise emission value(s)

mayalsobeusedinapreliminaryassessmentof

exposure.

3 ENGLISH

WARNING: Wear ear protection.

WARNING: The noise emission during actual

use of the power tool can differ from the declared

value(s) depending on the ways in which the

tool is used especially what kind of workpiece is

processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

off and when it is running idle in addition to the

trigger time).

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN62841-2-2:

Model DTDA040

Work mode: impact tightening of fasteners of the maxi-

mumcapacityofthetool

Vibration emission (a

h) : 4.5 m/s2

Uncertainty(K):1.5m/s

Model DTDA070

Work mode: impact tightening of fasteners of the maxi-

mumcapacityofthetool

Vibration emission (a

h) : 8.0 m/s2

Uncertainty(K):1.5m/s

Model DTDA100

Work mode: impact tightening of fasteners of the maxi-

mumcapacityofthetool

Vibration emission (a

h) : 7.5 m/s2

Uncertainty(K):1.5m/s

Model DTDA140

Work mode: impact tightening of fasteners of the maxi-

mumcapacityofthetool

Vibration emission (a

h) : 8.5 m/s2

Uncertainty(K):1.5m/s

NOTE: The declared vibration total value(s) has been

measured in accordance with a standard test method

andmaybeusedforcomparingonetoolwithanother.

NOTE:Thedeclaredvibrationtotalvalue(s)mayalso

beusedinapreliminaryassessmentofexposure.

WARNING: The vibration emission during

actual use of the power tool can differ from the

declared value(s) depending on the ways in which

the tool is used especially what kind of workpiece

is processed.

WARNING: Be sure to identify safety mea-

sures to protect the operator that are based on an

estimation of exposure in the actual conditions of

use (taking account of all parts of the operating

cycle such as the times when the tool is switched

off and when it is running idle in addition to the

trigger time).

EC Declaration of Conformity

For European countries only

TheECdeclarationofconformityisincludedasAnnexA

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING:

Read all safety warnings, instruc-

tions, illustrations and specications provided with this

power tool. Failure to follow all instructions listed below

mayresultinelectricshock,reand/orseriousinjury.

Save all warnings and instruc-

tions for future reference.

Theterm"powertool"inthewarningsreferstoyour

mains-operated(corded)powertoolorbattery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

whichmayignitethedustorfumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

youtolosecontrol.

Electrical safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodiedplugsandmatchingoutletswill

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tricshockifyourbodyisearthedorgrounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a cord

suitable for outdoor use reduces the risk of electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

Power tools can produce electromagnetic elds

(EMF) that are not harmful to the user. However,

users of pacemakers and other similar medical

devices should contact the maker of their device and/

or doctor for advice before operating this power tool.

Personal safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

powertoolsmayresultinseriouspersonalinjury.

Specyfikacje produktu

Marka:	Makita
Kategoria:	Maszyna do śrub
Model:	DTDA070Z

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Makita DTDA070Z, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna do śrub Makita

Makita DDF448Y1J Instrukcja

22 Grudnia 2024

Makita DDF446RTJ Instrukcja

22 Grudnia 2024

Makita DDA350Y1J Instrukcja

22 Grudnia 2024

Makita DHP448 Instrukcja

12 Października 2024

Makita 6906J Instrukcja

5 Października 2024

Makita DTW300Z Instrukcja

4 Października 2024

Makita DA3000V Instrukcja

4 Października 2024

Makita DTWA190Z Instrukcja

2 Października 2024

Makita 6952 Instrukcja

1 Października 2024

Makita TD090D Instrukcja

27 Września 2024

Instrukcje Maszyna do śrub

Najnowsze instrukcje dla Maszyna do śrub

Fuxtec FX-E1IW20 Instrukcja

13 Stycznia 2025

Hazet 9012EL-SPC Instrukcja

12 Stycznia 2025

RYOBI One+ R18IW3 Instrukcja

11 Stycznia 2025

MSW -ACW700 Instrukcja

10 Stycznia 2025

RYOBI PCL250 Instrukcja

4 Stycznia 2025

RYOBI PCL212 Instrukcja

4 Stycznia 2025

RYOBI One+ RSD18 Instrukcja

3 Stycznia 2025

Hazet 9212SPC-010 Instrukcja

1 Stycznia 2025

Hazet 6004CT-3 Instrukcja

1 Stycznia 2025

Hazet 6001-1.5/3 Instrukcja

1 Stycznia 2025