Instrukcja obsługi Makita DP2011


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita DP2011 (40 stron) w kategorii Maszyna do śrub. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/40
DP2010
DP2011
EN High Speed Drill INSTRUCTION MANUAL 3
FR Perceuse à Haute Vitesse MANUEL D’INSTRUCTIONS 6
DE Hochgeschwindigkeits-
Bohrmaschine BETRIEBSANLEITUNG 10
IT Trapano ad alta velocità ISTRUZIONI PER L’USO 14
NL Hoge-snelheid boormachine GEBRUIKSAANWIJZING 18
ES Taladro de Alta Velocidad MANUAL DE
INSTRUCCIONES 22
PT Furadeira de Alta Velocidade MANUAL DE INSTRÕES 26
DA Højhastighedsboremaskine BRUGSANVISNING 30
EL Τρυπάνι υψηλής ταχύτητας ΕΓΧΕΙΡΙΔΙΟ ΟΔΗΓΙΩΝ 33
TR Yüksek Hızlı Matkap KULLANMA KILAVUZU 37
1
2
Fig.1
1
2
3
Fig.2
1
A
B
Fig.3
2
1
Fig.4
1
2
Fig.5
12
3
Fig.6
Fig.7
2
3 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DP2010 DP2011
Drilling capacities 6.5 mmSteel
Wood 15 mm
No load speed 0 - 4,200 min-1
Overall length 209 mm 222 mm
Net weight 1.0 kg 1.1 kg
Safety class /II
Due to our continuing program of research and development, the specications herein are subject to change without notice.
Specications may di󰀨er from country to country.
Weight according to EPTA-Procedure 01/2014
Intended use
The tool is intended for drilling in wood, metal and
plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-1:
Sound pressure level (LpA) : 77 dB(A)
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB (A).
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can di󰀨er from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o󰀨 and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-1:
Work mode: drilling into metal
Vibration emission (a
h,D) : 3.1 m/s2
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual
use of the power tool can di󰀨er from the declared val-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched o󰀨 and when
it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, re and/or
serious injury.


Specyfikacje produktu

Marka: Makita
Kategoria: Maszyna do śrub
Model: DP2011

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Makita DP2011, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Maszyna do śrub Makita

Makita

Makita DDF448Y1J Instrukcja

22 Grudnia 2024
Makita

Makita DDF446RTJ Instrukcja

22 Grudnia 2024
Makita

Makita DDA350Y1J Instrukcja

22 Grudnia 2024
Makita

Makita DHP448 Instrukcja

12 Października 2024
Makita

Makita 6906J Instrukcja

5 Października 2024
Makita

Makita DTW300Z Instrukcja

4 Października 2024
Makita

Makita DA3000V Instrukcja

4 Października 2024
Makita

Makita DTWA190Z Instrukcja

2 Października 2024
Makita

Makita 6952 Instrukcja

1 Października 2024
Makita

Makita TD090D Instrukcja

27 Września 2024

Instrukcje Maszyna do śrub

Najnowsze instrukcje dla Maszyna do śrub

Fuxtec

Fuxtec FX-E1IW20 Instrukcja

13 Stycznia 2025
Hazet

Hazet 9012EL-SPC Instrukcja

12 Stycznia 2025
RYOBI

RYOBI One+ R18IW3 Instrukcja

11 Stycznia 2025
MSW

MSW -ACW700 Instrukcja

10 Stycznia 2025
RYOBI

RYOBI PCL250 Instrukcja

4 Stycznia 2025
RYOBI

RYOBI PCL212 Instrukcja

4 Stycznia 2025
RYOBI

RYOBI One+ RSD18 Instrukcja

3 Stycznia 2025
Hazet

Hazet 6004CT-3 Instrukcja

1 Stycznia 2025
Hazet

Hazet 6001-1.5/3 Instrukcja

1 Stycznia 2025