Instrukcja obsługi Makita DF488DWE
Makita
Maszyna do śrub
DF488DWE
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita DF488DWE (48 stron) w kategorii Maszyna do śrub. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/48

DF488D
EN Cordless Driver Drill INSTRUCTION MANUAL 3
PL Akum. wiertarko-wkrętarka INSTRUKCJA OBSŁUGI 8
HU Akkumulátoros
fúró-csavarbehajtó HASZNÁLATI KÉZIKÖNYV 14
SK Ľahký vŕtací skrutkovač NÁVOD NA OBSLUHU 19
CS Akumulátorový vrtací
šroubovák NÁVOD K OBSLUZE 24
UK Дриль із бездротовим
приводом
ІНСТРУКЦІЯ З
ЕКСПЛУАТАЦІЇ 29
RO Mașină de găurit și înșurubat
cu acumulator MANUAL DE INSTRUCŢIUNI 35
DE Akku-Bohrschrauber 40BETRIEBSANLEITUNG

1
2
3
Fig.1
1
Fig.2
1
A
B
Fig.3
1
Fig.4
ᵏᵐ
ᵒ
ᵔ
1
2
3
Fig.5
1
23
Fig.6
Fig.7
2

3 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: DF488D
Drilling capacities 13 mmSteel
Wood 36 mm
Fastening capacities Wood screw 6 mm x 75 mm
Machine screw M6
No load speed High (2) 0 - 1,400 min-1
Low (1) 0 - 400 min-1
Overall length 221 mm
Rated voltage D.C. 18 V
Net weight 1.7 kg
•
Due to our continuing program of research and development, the specications herein are subject to change without notice.
• Specications may dier from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2014
Applicable battery cartridge and charger
Battery cartridge BL1815G
Charger DC18WA
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.
Intended use
The tool is intended for drilling and screw driving in
wood, metal and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-1:
Sound pressure level (LpA ) : 70 dB(A) or less
Uncertainty (K) : 3 dB(A)
NOTE:
The declared noise emission value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE:
The declared noise emission value(s) may
also be used in a preliminary assessment of exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can dier from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-1:
Work mode: drilling into metal
Vibration emission (a
h,D) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING: The vibration emission during
actual use of the power tool can dier from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
Specyfikacje produktu
Marka: | Makita |
Kategoria: | Maszyna do śrub |
Model: | DF488DWE |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Makita DF488DWE, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do śrub Makita

22 Grudnia 2024

22 Grudnia 2024

22 Grudnia 2024

12 Października 2024

5 Października 2024

4 Października 2024

4 Października 2024

2 Października 2024

1 Października 2024

27 Września 2024
Instrukcje Maszyna do śrub
- Maszyna do śrub AEG
- Maszyna do śrub Worx
- Maszyna do śrub Kawasaki
- Maszyna do śrub Milwaukee
- Maszyna do śrub Bosch
- Maszyna do śrub Yato
- Maszyna do śrub Parkside
- Maszyna do śrub Toolcraft
- Maszyna do śrub Festool
- Maszyna do śrub Panasonic
- Maszyna do śrub StarTech.com
- Maszyna do śrub Bavaria By Einhell
- Maszyna do śrub SW-Stahl
- Maszyna do śrub Stanley
- Maszyna do śrub Black & Decker
- Maszyna do śrub Hazet
- Maszyna do śrub DeWalt
- Maszyna do śrub Einhell
- Maszyna do śrub Genesis
- Maszyna do śrub Silverline
- Maszyna do śrub Ozito
- Maszyna do śrub Fuxtec
- Maszyna do śrub RYOBI
- Maszyna do śrub Chicago Pneumatic
- Maszyna do śrub Chamberlain
- Maszyna do śrub GO/ON
- Maszyna do śrub DEDRA
- Maszyna do śrub Biltema
- Maszyna do śrub Hilti
- Maszyna do śrub Emos
- Maszyna do śrub Rodcraft
- Maszyna do śrub BaseTech
- Maszyna do śrub Trotec
- Maszyna do śrub Dremel
- Maszyna do śrub Velleman
- Maszyna do śrub Meec Tools
- Maszyna do śrub Güde
- Maszyna do śrub Bavaria
- Maszyna do śrub Mafell
- Maszyna do śrub Westfalia
- Maszyna do śrub Carrera
- Maszyna do śrub Beta
- Maszyna do śrub Omega
- Maszyna do śrub Fein
- Maszyna do śrub Ferm
- Maszyna do śrub Hitachi
- Maszyna do śrub Craftsman
- Maszyna do śrub Matrix
- Maszyna do śrub Fieldmann
- Maszyna do śrub PowerPlus
- Maszyna do śrub Alpha Tools
- Maszyna do śrub Vonroc
- Maszyna do śrub Powerfix
- Maszyna do śrub HiKOKI
- Maszyna do śrub EasyMaxx
- Maszyna do śrub Wiha
- Maszyna do śrub Porter-Cable
- Maszyna do śrub Metabo
- Maszyna do śrub Cotech
- Maszyna do śrub Skil
- Maszyna do śrub Pansam
- Maszyna do śrub Toolland
- Maszyna do śrub Tacklife
- Maszyna do śrub Senco
- Maszyna do śrub Maktec
- Maszyna do śrub Steren
- Maszyna do śrub Power Craft
- Maszyna do śrub Kraftwerk
- Maszyna do śrub Kress
- Maszyna do śrub Urrea
- Maszyna do śrub Truper
- Maszyna do śrub Bruder Mannesmann
- Maszyna do śrub Meister Craft
- Maszyna do śrub Batavia
- Maszyna do śrub Black Decker
- Maszyna do śrub Elu
- Maszyna do śrub Sthor
- Maszyna do śrub Gedore
- Maszyna do śrub Cleco
- Maszyna do śrub MSW
- Maszyna do śrub Einhell Bavaria
- Maszyna do śrub Wera
- Maszyna do śrub Ingersoll Rand
- Maszyna do śrub Prowork
- Maszyna do śrub Facom
- Maszyna do śrub TAURUS Titanium
- Maszyna do śrub Total
- Maszyna do śrub Netter Vibration
Najnowsze instrukcje dla Maszyna do śrub

13 Stycznia 2025

12 Stycznia 2025

11 Stycznia 2025

10 Stycznia 2025

4 Stycznia 2025

4 Stycznia 2025

3 Stycznia 2025

1 Stycznia 2025

1 Stycznia 2025

1 Stycznia 2025