Instrukcja obsługi Makita DDF456Z

Makita maszyna wiertnicza DDF456Z

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita DDF456Z (12 stron) w kategorii maszyna wiertnicza. Ta instrukcja była pomocna dla 28 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Driver Drill

DDF446

DDF456

011360

ENGLISH (Original instructions)

SPECIFICATIONS

Model DDF446 DDF456

Steel 13 mm 13 mm

Wood 38 mm 38 mm

Wood screw 6 mm x 75 mm 10 mm x 89 mm

Capacities

Machine screw M6 M6

High (2) 0 - 1,500 0 - 1,500

No load speed

(min-1) Low (1) 0 - 400 0 - 400

Overall length 192 mm 192 mm

Net weight 1.5 kg 1.7 kg 1.5 kg 1.7 kg

Battery cartridge BL1415 / BL1415N BL1430 / BL1440

BL1815 / BL1815N /

BL1820

BL1830 / BL1840 /

BL1850

Rated voltage D.C. 14.4 V D.C. 18 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of the European

Directives, on Waste Electric and

Electronic Equipment and Batteries and

Accumulators and Waste Batteries and

Accumulators and their implementation

in accordance with national laws, electric

equipment and batteries and battery

pack(s) that have reached the end of

their life must be collected separately

and returned to an environmentally

compatible recycling facility.

ENE034-1

Intended use

The tool is intended for drilling and screw driving in wood,

metal and plastic.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (LpA) : 71 dB (A)

Uncertainty (K) : 3 dB (A)

The noise level under working may exceed 80 dB (A).

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

Ni-MH

Li-ion

ENH101-18

For European countries only

EC Declaration of Conformity

Makita declares that the following Machine(s):

Designation of Machine:

Cordless Driver Drill

Model No./ Type: DDF446, DDF456

Conforms to the following European Directives:

2006/42/EC

They are manufactured in accordance with the following

standard or standardized documents:

EN60745

The technical file in accordance with 2006/42/EC is

available from:

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

31.12.2013

000331

Yasushi Fukaya

Director

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium

GEA006-2

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions.

Failure to follow the warnings and instructions

may result in electric shock, fire and/or serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a ground fault circuit

interrupter (GFCI) protected supply. Use of an

GFCI reduces the risk of electric shock.

Personal safety

10. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the influence of drugs, alcohol or

medication. A moment of inattention while

operating power tools may result in serious

personal injury.

11. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

12. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

your finger on the switch or energising power tools

that have the switch on invites accidents.

13. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

14. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

15.

Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing, and gloves

away from moving parts.

Loose clothes, jewellery

or long hair can be caught in moving parts.

16. If devices are provided for the connection of

dust extraction and collection facilities,

ensure these are connected and properly used.

Use of dust collection can reduce dust-related

hazards.

Specyfikacje produktu

Marka:	Makita
Kategoria:	maszyna wiertnicza
Model:	DDF456Z
Źródło zasilania:	Bateria
Wysokość produktu:	251 mm
Szerokość produktu:	79 mm
Głębokość produktu:	192 mm
Waga produktu:	1500 g
Czas ładowania:	36 min
Pojemność baterii:	4 Ah
Technologia baterii:	Litowo-jonowa (Li-Ion)
Konstrukcja produktu:	Wiertarka pistoletowa
Napięcie baterii:	18 V
Walizka:	Tak
Rodzaj zacisku:	Zamek centralny
Średnica wiertła w metalu (max):	13 mm
Średnica wiertła w drewnie (max):	38 mm
Ładowarka akumulatorów:	Tak
Tłumienie drgań:	1.5 m/s²
Wbudowane światło:	Tak
Wiercenie:	Tak
Wkręcanie:	Tak
Ustawienia obrotów:	16
Maksymalny moment obrotowy (aplikacje miękkie):	38 N·m
Liczba biegów:	2
Minimalna szerokość szczęk:	1.5 mm
Maksymalna szerokość szczęk:	13 mm
Wrzeciono:	1/2"
Prędkość obrotowa bez obciążenia (pierwszy bieg):	400 RPM
Prędkość obrotowa bez obciążenia (drugi bieg):	1500 RPM
Maksymalny moment obrotowy (aplikacje twarde):	50 N·m
Dołączony akumulator:	Tak
Liczba baterii włączone:	2 szt.