Instrukcja obsługi Makita DA392D
Makita
Maszyna do śrub
DA392D
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita DA392D (76 stron) w kategorii Maszyna do śrub. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/76

GB
Cordless Angle Drill Instruction Manual
F
Perceuse d’angle sans fil Manuel d’instructions
D
Akku-Winkelbohrmaschine Betriebsanleitung
I
Trapano ad angolo a betteria Istruzioni per l’uso
NL
Haakse boormachine snoerloze Gebruiksaanwijzing
E
Taladro en ángulo sin cable Manual de instrucciones
P
Berbequim angular a bateria Manual de instruções
DK
Batteridrevet vinkelboremaskine Brugsanvisning
S
Sladdlös vinkelborrmaskin Bruksanvisning
N
Batteridrevet vinkelboremaskin Bruksanvisning
SF
Langaton kulmaporakone Käyttöohje
GR Φορητ γωνιακ τρυπάνι Οδηγίες χρήσεως
7.2 V DA 302D
9.6 V DA392D
12V DA312D

2
1 2
3 4
5 6
7 8
1
2
2
3
6
7
2
4
5
9
8
10 11
12
13
1

3
ENGLISH
Explanation of general view
1 Set plate
2 Battery cartridge
3 Button
4 Charging light
5 Battery charger
6 Sleeve
7 Ring
8 Reversing switch lever
9 Switch trigger
10 B side
11 A side
12 Restart button
13 Screw
SPECIFICATIONS
Model DA302D DA392D DA312D
Capacities
Steel ........................................................... 10 mm 10 mm 10 mm
Wood .......................................................... 10 mm 12 mm 12 mm
Wood screw ................................................ 4.5 mm x 20 mm 4.5 mm x 20 mm 4.5 mm x 20 mm
No load speed (min-1) .................................... 0 – 800 0 – 800 0 – 800
Overall length ................................................ 296 mm 324 mm 324 mm
Net weight ...................................................... 1.1 kg 1.3 kg 1.4 kg
Rated voltage ................................................ D.C.7.2 V D.C. 9.6 V D.C.12 V
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.
IMPORTANT SAFETY INSTRUCTIONS FOR
CHARGER & BATTERY CARTRIDGE
ENC001-3
1. SAVE THESE INSTRUCTIONS — This manual
contains important safety and operating instruc-
tions for battery charger.
2. Before using battery charger, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
3. CAUTION — To reduce risk of injury, charge only
MAKITA type rechargeable batteries. Other types
of batteries may burst causing personal injury
and damage.
4. Do not expose charger to rain or snow.
5. Use of an attachment not recommended or sold
by the battery charger manufacturer may result
in a risk of fire, electric shock, or injury to per-
sons.
6. To reduce risk of damage to electric plug and
cord, pull by plug rather than cord when discon-
necting charger.
7. Make sure cord is located so that it will not be
stepped on, tripped over, or otherwise subjected
to damage or stress.
8. Do not operate charger with damaged cord or
plug — replace them immediately.
9. Do not operate charger if it has received a sharp
blow, been dropped, or otherwise damaged in
any way; take it to a qualified serviceman.
10. Do not disassemble charger or battery cartridge;
take it to a qualified serviceman when service or
repair is required. Incorrect reassembly may
result in a risk of electric shock or fire.
11. To reduce risk of electric shock, unplug charger
from outlet before attempting any maintenance
or cleaning. Turning off controls will not reduce
this risk.
12. The battery charger is not intended for use by
young children or infirm persons without super-
vision.
13. Young children should be supervised to ensure
that they do not play with the battery charger.
14. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
15. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
ADDITIONAL SAFETY RULES FOR CHARGER
& BATTERY CARTRIDGE
1. Do not charge Battery Cartridge when tempera-
ture is BELOW 10°C (50°F) or ABOVE 40°C
(104°F).
2. Do not attempt to use a step-up transformer, an
engine generator or DC power receptacle.
3. Do not allow anything to cover or clog the
charger vents.
4. Always cover the battery terminals with the bat-
tery cover when the battery cartridge is not
used.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any conduc-
tive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain.
A battery short can cause a large current flow,
overheating, possible burns and even a break-
down.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50°C (122°F).
Specyfikacje produktu
Marka: | Makita |
Kategoria: | Maszyna do śrub |
Model: | DA392D |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Makita DA392D, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do śrub Makita

22 Grudnia 2024

22 Grudnia 2024

22 Grudnia 2024

12 Października 2024

5 Października 2024

4 Października 2024

4 Października 2024

2 Października 2024

1 Października 2024

27 Września 2024
Instrukcje Maszyna do śrub
- Maszyna do śrub AEG
- Maszyna do śrub Worx
- Maszyna do śrub Kawasaki
- Maszyna do śrub Milwaukee
- Maszyna do śrub Bosch
- Maszyna do śrub Yato
- Maszyna do śrub Parkside
- Maszyna do śrub Toolcraft
- Maszyna do śrub Festool
- Maszyna do śrub Panasonic
- Maszyna do śrub StarTech.com
- Maszyna do śrub Bavaria By Einhell
- Maszyna do śrub SW-Stahl
- Maszyna do śrub Stanley
- Maszyna do śrub Black & Decker
- Maszyna do śrub Hazet
- Maszyna do śrub DeWalt
- Maszyna do śrub Einhell
- Maszyna do śrub Genesis
- Maszyna do śrub Silverline
- Maszyna do śrub Ozito
- Maszyna do śrub Fuxtec
- Maszyna do śrub RYOBI
- Maszyna do śrub Chicago Pneumatic
- Maszyna do śrub Chamberlain
- Maszyna do śrub GO/ON
- Maszyna do śrub DEDRA
- Maszyna do śrub Biltema
- Maszyna do śrub Hilti
- Maszyna do śrub Emos
- Maszyna do śrub Rodcraft
- Maszyna do śrub BaseTech
- Maszyna do śrub Trotec
- Maszyna do śrub Dremel
- Maszyna do śrub Velleman
- Maszyna do śrub Meec Tools
- Maszyna do śrub Güde
- Maszyna do śrub Bavaria
- Maszyna do śrub Mafell
- Maszyna do śrub Westfalia
- Maszyna do śrub Carrera
- Maszyna do śrub Beta
- Maszyna do śrub Omega
- Maszyna do śrub Fein
- Maszyna do śrub Ferm
- Maszyna do śrub Hitachi
- Maszyna do śrub Craftsman
- Maszyna do śrub Matrix
- Maszyna do śrub Fieldmann
- Maszyna do śrub PowerPlus
- Maszyna do śrub Alpha Tools
- Maszyna do śrub Vonroc
- Maszyna do śrub Powerfix
- Maszyna do śrub HiKOKI
- Maszyna do śrub EasyMaxx
- Maszyna do śrub Wiha
- Maszyna do śrub Porter-Cable
- Maszyna do śrub Metabo
- Maszyna do śrub Cotech
- Maszyna do śrub Skil
- Maszyna do śrub Pansam
- Maszyna do śrub Toolland
- Maszyna do śrub Tacklife
- Maszyna do śrub Senco
- Maszyna do śrub Maktec
- Maszyna do śrub Steren
- Maszyna do śrub Power Craft
- Maszyna do śrub Kraftwerk
- Maszyna do śrub Kress
- Maszyna do śrub Urrea
- Maszyna do śrub Truper
- Maszyna do śrub Bruder Mannesmann
- Maszyna do śrub Meister Craft
- Maszyna do śrub Batavia
- Maszyna do śrub Black Decker
- Maszyna do śrub Elu
- Maszyna do śrub Sthor
- Maszyna do śrub Gedore
- Maszyna do śrub Cleco
- Maszyna do śrub MSW
- Maszyna do śrub Einhell Bavaria
- Maszyna do śrub Wera
- Maszyna do śrub Ingersoll Rand
- Maszyna do śrub Prowork
- Maszyna do śrub Facom
- Maszyna do śrub TAURUS Titanium
- Maszyna do śrub Total
- Maszyna do śrub Netter Vibration
Najnowsze instrukcje dla Maszyna do śrub

13 Stycznia 2025

12 Stycznia 2025

11 Stycznia 2025

10 Stycznia 2025

4 Stycznia 2025

4 Stycznia 2025

3 Stycznia 2025

1 Stycznia 2025

1 Stycznia 2025

1 Stycznia 2025