Instrukcja obsługi Makita 9554NBKD

Makita szlifierka 9554NBKD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita 9554NBKD (12 stron) w kategorii szlifierka. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Angle Grinder
9553NB
9554NB
9555NB
005801
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model 9553NB 9554NB 9555NB
Depressed center wheel diameter 100 mm 115 mm 125 mm
Spindle thread M10 M14 M14
Rated speed (n)/No load speed (n
0
) 11000 min-1 10000 min-1 10000 min-1
Overall length 258 mm 258 mm 258 mm
Net weight 1.8 kg 1.8 kg 1.9 kg
Safety class /II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END202-6
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Wear safety glasses.
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
ENE048-1
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
For Model 9553NB
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA) : 84 dB(A)
Sound power level (L
WA) : 95 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG208-5
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : surface grinding
Vibration emission (ah,AG) : 8.0 m/s2
Uncertainty (K) : 1.5 m/s2
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
The declared vibration emission value may also be used
in a preliminary assessment of exposure.
The declared vibration emission value is used for main
applications of the power tool. However if the power tool
is used for other applications, the vibration emission
value may be different.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
3
For Model 9554NB
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA) : 85 dB(A)
Sound power level (LWA) : 96 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG208-5
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : surface grinding
Vibration emission (ah,AG) : 7.0 m/s2
Uncertainty (K) : 1.5 m/s2
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
The declared vibration emission value may also be used
in a preliminary assessment of exposure.
The declared vibration emission value is used for main
applications of the power tool. However if the power tool
is used for other applications, the vibration emission
value may be different.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For Model 9555NB
ENG102-3
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
pA) : 85 dB(A)
Sound power level (LWA) : 96 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG208-5
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Work mode : surface grinding
Vibration emission (ah,AG) : 8.5 m/s2
Uncertainty (K) : 1.5 m/s2
The declared vibration emission value has been
measured in accordance with the standard test method
and may be used for comparing one tool with another.
The declared vibration emission value may also be used
in a preliminary assessment of exposure.
The declared vibration emission value is used for main
applications of the power tool. However if the power tool
is used for other applications, the vibration emission
value may be different.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-15
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Angle Grinder
Model No./ Type: 9553NB,9554NB,9555NB
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
30.1.2009
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN

Specyfikacje produktu

Marka: Makita
Kategoria: szlifierka
Model: 9554NBKD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Makita 9554NBKD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje szlifierka Makita

Makita

Makita 9562CVR Instrukcja

12 Stycznia 2025
Makita

Makita GA9060R Instrukcja

14 Października 2024
Makita

Makita DGA700Z Instrukcja

12 Października 2024
Makita

Makita BBO180 Instrukcja

2 Października 2024
Makita

Makita 9557NB Instrukcja

2 Października 2024
Makita

Makita 9558HNR Instrukcja

2 Października 2024
Makita

Makita DBO484 Instrukcja

2 Października 2024
Makita

Makita CE002G Instrukcja

2 Października 2024
Makita

Makita GA022GD202 Instrukcja

2 Października 2024
Makita

Makita GA7063RX02 Instrukcja

2 Października 2024

Instrukcje szlifierka

Najnowsze instrukcje dla szlifierka

Parkside

Parkside PEXS 270 A1 Instrukcja

13 Stycznia 2025
Tryton

Tryton TDS125B Instrukcja

11 Stycznia 2025
Bosch

Bosch GWS 18V-8 Professional Instrukcja

5 Stycznia 2025
DeWalt

DeWalt DCG415B Instrukcja

3 Stycznia 2025
Einhell

Einhell TC-AG 18/115 Li Instrukcja

31 Grudnia 2025
DeWalt

DeWalt DWE4115 Instrukcja

30 Grudnia 2025
Black Decker

Black Decker 4292 Instrukcja

30 Grudnia 2025
Hazet

Hazet 9032M-36 Instrukcja

30 Grudnia 2025
Einhell

Einhell WS 230-4 Instrukcja

29 Grudnia 2024
RIKON

RIKON 80-800VS Instrukcja

27 Grudnia 2024