Instrukcja obsługi Makita 5903RK


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Makita 5903RK (12 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Circular Saw
5603R
5703R
5705R
5903R
5103R
5143R
005391
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model 5603R 5703R 5705R 5903R 5103R 5143R
Blade diameter 165 mm 190 mm 190 mm 235 mm 270 mm 355 mm
at 90° 54 mm 66 mm 66 mm 85 mm 100 mm 130 mm
Max. cutting depth at 45° 38 mm 46 mm 46 mm 64 mm 73 mm 90 mm
No load speed (min
-1) 5,000 4,800 4,800 4,500 3,800 2,700
Overall length 330 mm 356 mm 356 mm 400 mm 442 mm 607 mm
Net weight 4.9 kg 5.7 kg 5.7 kg 7.2 kg 9.4 kg 14.0 kg
Safety class /II /II /II /II /II /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-6
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
ENE078-2
Intended use
The tool is intended for performing lengthways and
crossways straight cuts and mitre cuts with angles in
wood while in firm contact with the workpiece. With
appropriate Makita genuine saw blades, other materials
can also be sawed.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
For model 5705R
ENF100-1
For public low-voltage distribution systems of
between 220 V and 250 V.
Switching operations of electric apparatus cause voltage
fluctuations. The operation of this device under unfavorable
mains conditions can have adverse effects to the operation
of other equipment. With a mains impedance equal or less
than 0.37 Ohms it can be presumed that there will be no
negative effects. The mains socket used for this device
must be protected with a fuse or protective circuit breaker
having slow tripping characteristics.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model 5603R
Sound pressure level (L
pA) : 91 dB(A)
Sound power level (L
WA) : 102 dB(A)
Uncertainty (K) : 3 dB(A)
Model 5143R
Sound pressure level (L
pA) : 88 dB(A)
Sound power level (L
WA) : 99 dB(A)
Uncertainty (K) : 3 dB(A)
Model 5703R, 5705R, 5903R
Sound pressure level (L
pA) : 92 dB(A)
Sound power level (L
WA) : 103 dB(A)
Uncertainty (K) : 3 dB(A)
Model 5103R
Sound pressure level (L
pA) : 87 dB(A)
Sound power level (L
WA) : 98 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
3
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model 5603R
Work mode : cutting wood
Vibration emission (ah,W) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Model 5103R, 5143R
Work mode : cutting wood
Vibration emission (ah,W) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Work mode : cutting metal
Vibration emission (ah,M) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Model 5703R
Work mode : cutting wood
Vibration emission (ah,W) : 3.5 m/s2
Uncertainty (K) : 1.5 m/s2
Model 5903R
Work mode : cutting wood
Vibration emission (ah,W) : 3.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : cutting metal
Vibration emission (ah,M) : 4.0 m/s2
Uncertainty (K) : 1.5 m/s2
Model 5705R
Work mode : cutting wood
Vibration emission (ah,W) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s2
ENG901-1
The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-16
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Circular Saw
Model No./ Type: 5603R, 5703R, 5705R, 5903R, 5103R,
5143R
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
30.1.2009
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.


Specyfikacje produktu

Marka: Makita
Kategoria: Maszyna do piłowania
Model: 5903RK

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Makita 5903RK, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Maszyna do piłowania Makita

Makita

Makita DUC306PG2 Instrukcja

12 Stycznia 2025
Makita

Makita DJR187ZK Instrukcja

12 Grudnia 2024
Makita

Makita 5603 Instrukcja

15 Października 2024
Makita

Makita DJV181Z Instrukcja

12 Października 2024
Makita

Makita DUC353Z Instrukcja

8 Października 2024
Makita

Makita JR001GD202 Instrukcja

4 Października 2024
Makita

Makita BSS610 Instrukcja

2 Października 2024
Makita

Makita EA3502S Instrukcja

2 Października 2024
Makita

Makita DJV140 Instrukcja

2 Października 2024
Makita

Makita HS301DWAE Instrukcja

30 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Güde

Güde GSS 400 Instrukcja

12 Stycznia 2025
HiKOKI

HiKOKI C 6BU3 Instrukcja

11 Stycznia 2025
DEDRA

DEDRA DED7060 Instrukcja

11 Stycznia 2025
Einhell

Einhell KGS 190 Instrukcja

11 Stycznia 2025
Sun Joe

Sun Joe SWJ599E Instrukcja

11 Stycznia 2025
Maruyama

Maruyama MCV51 Instrukcja

11 Stycznia 2025
Vonroc

Vonroc JS505DC Instrukcja

9 Stycznia 2025