Instrukcja obsługi Magnus LM-700

Magnus statyw LM-700

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Magnus LM-700 (2 stron) w kategorii statyw. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

• Ensure that all knobs, handles, and legs are properly

secured before mounting your camera on this tripod.

• Never transport, carry, or store this tripod while your

camera is attached.

• Do not attempt to remove the center brace.

• Do not use solvents, grease, or oil on any of the tripod

components. Use only a mild soap solution to clean,

and wipe dry with a lint-free cloth.

• Do not exceed the maximum load capacity.

• All images are for illustrative purposes only.

User Cautions

Speciﬁcations

Photo/Video Tripod Components

www.magnustripods.com

Tilt & pan bar/

Tilt lock

Center column

locking knob

Center column

pan lock

Carry handle

Bubble level

90° tilt lock

Pan lock

Registration pin

1/4-20 mounting screwQuick-release plate

Quick-release lever

Foam padding

Center brace

locking collar Flip-locks

Center column/

Monopod

LM-700

Photo/Video Tripod

ONE-YEAR LIMITED WARRANTY

This MAGNUS product is warranted to the original

purchaser to be free from defects in materials and

workmanship under normal consumer use for a period

of one (1) year from the original purchase date or thirty

(30) days after replacement, whichever occurs later.

The warranty provider’s responsibility with respect to

this limited warranty shall be limited solely to repair or

replacement, at the provider’s discretion, of any product

that fails during normal use of this product in its intended

manner and in its intended environment. Inoperability

of the product or part(s) shall be determined by the

warranty provider. If the product has been discontinued,

the warranty provider reserves the right to replace

it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused

by misuse, neglect, accident, alteration, abuse, improper

installation or maintenance. EXCEPT AS PROVIDED

HEREIN, THE WARRANTY PROVIDER MAKES NEITHER

ANY EXPRESS WARRANTIES NOR ANY IMPLIED

WARRANTIES, INCLUDING BUT NOT LIMITED TO

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE. This warranty

provides you with speciﬁc legal rights, and you may

also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Magnus

Customer Service Department to obtain a return

merchandise authorization (“RMA”) number, and return

the defective product to Magnus along with the RMA

number and proof of purchase. Shipment of the defective

product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit

www.magnustripods.com or call Customer Service at

212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

Magnus is a registered trademark of the Gradus Group.

GG1

Weight

hook

Swiveling rubber feet

Thank you

for choosing

Magnus.

Max Height: 70 in. (177.8 cm)

Max Height without Center Column

Extended: 59 in. (150 cm)

Minimum Height: 21.4 in. (54.3 cm)

Closed Height: 23 in. (58.4 cm)

Maximum Load: 10 lb. (4.5 kg)

Weight: 3.6 lb. (1.6 kg)

Monopod Height: Max: 62 in. (157.5 cm)

Min: 17 in. (43.2 cm)

Opening the Tripod

Mounting the Quick-Release Plate to

the Camera

Using the Pan & Tilt Head Using the Lateral Center Colum

Using the Monopod

To Retract the Monopod Sections

The Counterweight Hook

The center column converts

to a monopod with ﬁve

telescoping sections.

Collapse the monopod to its shortest length before

replacing it in the tripod.

In windy conditions or on

an uneven surface, stabilize

the tripod and camera by

hanging a weight on the

counterweight hook.

Adjusting the Center Column Height

1 Always extend the

legs from the top ﬂip

locks ﬁrst. Extend the

legs to the desired

height and close each

ﬂip lock.

The quick-release plate has a registration pin for

compatible cameras.

Make sure the quick-release plate is ﬂush with the bottom

of the camera.

1 Pull out the quick-

release lever and

remove the quick-

release plate from the

head.

2 Line up the quick-

release plate

lengthwise with

the bottom of the

camera, and tighten

the screw into the

camera’s mounting

socket.

1 Use the center

column lock to raise

and lower the center

column.

1 Loosen the center

column lock, and lift

the center column out

of the tripod.

2 Hold the monopod in

one hand and rotate

the foot. Each of

the four telescoping

sections unlocks with

a quarter turn.

3 When the desired

height is reached,

turn the foot in the

opposite direction to

lock the sections into

place.

1 Turn the foot a

quarter turn for each

extended section

and collapse all the

sections.

2 When the monopod

is fully retracted,

rotate the foot to lock

it closed.

1 Loosen the center

column lock, and lift

the center column out

of the tripod.

2 Insert the center

column into the

center column mount

laterally, and tighten

the center column lock

to secure it.

3 Loosen the center

column pan lock

to turn the center

column to the desired

position. Tighten

the lock to prevent

swiveling

2 Set the center column

at the desired height

and tighten the

center column lock.

To prevent swiveling,

tighten the center

column pan lock.

1 Loosen the tilt/pan

bar by turning it

counterclockwise.

Tilt the head to the

desired angle and

tighten the tilt/pan

bar to lock it into

place.

2 Loosen the pan

locking knob to use

the 360° pan feature.

Aim the camera, and

tighten the locking

knob to lock in the

new position.

3 To change the camera

orientation from

landscape to portrait,

loosen the platform

orientation knob. Tilt

the platform 90°, and

tighten the knob to

lock the platform into

the new position.

2 Loosen the center

brace locking collar.

Gently pull the legs

out, and then push

the center brace

all the way down.

Tighten the center

brace locking collar

until secure.

3 Pull out the quick-

release lever and

insert the camera/

plate assembly back

into the head. Push

the quick-release lever

in to lock the quick-

release plate into

place.

If the center column doesn’t slide smoothly, loosen the

center column pan lock.

Important! Don’t raise the

height beyond the center

column’s stop line.

Specyfikacje produktu

Marka:	Magnus
Kategoria:	statyw
Model:	LM-700

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Magnus LM-700, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje statyw Magnus

Magnus VPH-10 Instrukcja

19 Grudnia 2024

Magnus VPH-10P Instrukcja

11 Grudnia 2024

Magnus REX DSF-132 Instrukcja

11 Grudnia 2024

Magnus GP-100 Instrukcja

5 Października 2024

Magnus PV-3330 Instrukcja

5 Października 2024

Magnus REX VT-4000-PRO Instrukcja

5 Października 2024

Magnus ZH-3 Instrukcja

5 Października 2024

Magnus PV-3330G Instrukcja

5 Października 2024

Magnus DWF-2 Instrukcja

5 Października 2024

Magnus DX-3430 Instrukcja

5 Października 2024

Instrukcje statyw

Najnowsze instrukcje dla statyw

Laserliner FixPod 155 cm Instrukcja

12 Marca 2025

Axler MAR-13 Instrukcja

25 Lutego 2025

3 Legged Thing Taylor 2.0 Instrukcja

21 Lutego 2025

Block & Block DELTA-100 Instrukcja

20 Lutego 2025

3 Legged Thing Trent 2.0 Instrukcja

20 Lutego 2025

3 Legged Thing Lance Instrukcja

20 Lutego 2025

3 Legged Thing Alana Instrukcja

20 Lutego 2025

Manfrotto Mini Salon 806 Instrukcja

11 Lutego 2025

Manfrotto Salon 230 Instrukcja

11 Lutego 2025

Manfrotto 475B Instrukcja

11 Lutego 2025