Instrukcja obsługi Mackie PPM608

Mackie Konsola miksująca PPM608

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Mackie PPM608 (32 stron) w kategorii Konsola miksująca. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/32

PPM608

O W N E R ’ S M A N U A L

8-Channel, 2 x 500 W Professional Powered Mixer

PPM608

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including ampliﬁers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding-type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety. If the

provided plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

11.

Only use attachments/accessories speciﬁed by the manufacturer.

12.

Use only with a cart, stand, tripod, bracket, or table

speciﬁed by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when

moving the cart/apparatus combination to avoid

injury from tip-over.

13.

Unplug this apparatus during lightning storms or

when unused for long periods of time.

14.

Refer all servicing to qualiﬁed service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

15.

Do not overload wall outlets and extension cords as this can result in a

risk of ﬁre or electric shock.

16.

This apparatus shall not be exposed to dripping or splashing, and no

object ﬁlled with liquids, such as vases or beer glasses, shall be placed

on the apparatus.

17.

This apparatus has been designed with Class-I construction and must

be connected to a mains socket outlet with a protective earthing

connection (the third grounding prong).

18.

This apparatus has been equipped with an all-pole, rocker-style AC

mains power switch. This switch is located on the rear panel and

should remain readily accessible to the user.

19. NOTE: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorientorrelocatethereceivingantenna.

• Increasetheseparationbetweentheequipmentandthe

receiver.

• Connecttheequipmentintoanoutletonacircuitdifferentfrom

that to which the receiver is connected.

• Consultthedealeroranexperiencedradio/TVtechnicianfor

help.

CAUTION: Changes or modiﬁcations to this device not expressly

approved by LOUD Technologies Inc. could void the user's authority to

operate the equipment under FCC rules.

20.

This apparatus does not exceed the Class A/Class B (whichever is

applicable)

limits for radio noise emissions from digital apparatus as

set out in the radio interference regulations of the Canadian Department

of Communications.

ATTENTION — Le présent appareil numérique n’émet pas de bruits

radioélectriques dépassant las limites applicables aux appareils

numériques de class A/de class B (selon le cas) prescrites dans le

réglement sur le brouillage radioélectrique édicté par les ministere des

communications du Canada.

21.

Exposure to extremely high noise levels may cause permanent hearing

loss. Individuals vary considerably in susceptibility to noise-induced

hearing loss, but nearly everyone will lose some hearing if exposed to

sufﬁciently intense noise for a period of time. The U.S. Government’s

Occupational Safety and Health Administration (OSHA) has speciﬁed

the permissible noise level exposures shown in the following chart.

According to OSHA, any exposure in excess of these permissible limits

could result in some hearing loss. To ensure against potentially

dangerous exposure to high sound pressure levels, it is recommended

that all persons exposed to equipment capable of producing high

sound pressure levels use hearing protectors while the equipment

is in operation. Ear plugs or protectors in the ear canals or over the

ears must be worn when operating the equipment in order to prevent

permanent hearing loss if exposure is in excess of the limits set forth

here:

Important Safety Instructions

CAUTION AVIS

RISK OF ELECTRIC . DO NOT OPENSHOCK

RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR

CAUTION: REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK)TO

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING QUALIFIED PERSONNELTO

ATTENTION: POUR EVITER LES RISQUES DE CHOC ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE.

AUCUN ENTRETIEN DE PIECES INTERIEURES PAR L'USAGER.

CONFIER L'ENTRETIEN AU PERSONNEL QUALIFIE.

AVIS: POUR EVITER LES RISQUES D'INCENDIE OU D'ELECTROCUTION, N'EXPOSEZ S CET TICLE PA AR

A A LA PLUIE OU L'HUMIDITE

The lightning flash with arrowhead symbol within an equilateral triangle is

intended to alert the user to the presence of uninsulated "dangerous

voltage" within the product's enclosure, that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

Le symbole éclair avec point de flèche à l'intérieur d'un triangle équilatéral

est utilisé pour alerter l'utilisateur de la présence à l'intérieur du coffret de

"voltage dangereux" non isolé d'ampleur suffisante pour constituer un risque

d'éléctrocution.

The exclamation point within an equilateral triangle is intended to alert the

user of the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

Le point d'exclamation à l'intérieur d'un triangle équilatéral est employé

pour alerter les utilisateurs de la présence d'instructions importantes pour le

fonctionnement et l'entretien (service) dans le livret d'instruction

accompagnant l'appareil. WARNING — To reduce the risk of ﬁre or electric shock, do not

expose this apparatus to rain or moisture.

Duration,

per day in

hours

Sound Level

dBA, Slow

Response

Typical Example

8 90 Duo in small club

6 92

4 95 Subway Train

3 97

2 100 Veryloudclassicalmusic

1.5 102

1 105 Greg and Ben screaming at Troy

about deadlines

0.5 110

0.25 or less 115 Loudest parts at a rock concert

PORTABLE CART

WARNING

Owner’s Manual

Part No. SW0681 Rev. F 09.2011

Loosely based on a dream sequence in which the entire Mackie marketing

department tap-dance their way into downtown Woodinville for lunch.

Ready, steady, go!

1. Turn the channel level, mon 1, and FX/mon 2

controls fully down.

2. Turn down the compressor controls (ch. 1–4).

3. Set all the EQ controls to the center, including

the graphic EQ sliders.

4. Turn down the main level and monitor 1 level

controls, and turn on the powered mixer.

5. For each channel, press the gain switch in (low

gain) if you are using a line-level source. Press

it out (high gain) if you are using a microphone

or other low-level source.

6. For condenser mics, push in the phantom

power switch. If you are using both condenser

and dynamic mics, don’t worry. Phantom power

will not hurt most dynamic mics. Check the

micro phone’s user manual if you’re not sure.

7. Play something into an input at real-world

levels, and turn up the channel level to

U (unity).

8. In normal playing, the channel's OL LED should

only light occasionally. If it stays on for a large

portion of your performance, check that the

gain switch is set correctly.

9. Slowly turn up the main level control until you

hear the signal in your speakers.

10. Repeat steps 5 to 8 for the remaining channels.

11. If needed, apply some EQ wisely.

12. Adjust the levels to get the best mix. Keep the

level controls fully down on unused channels.

Other Notes

• Onlyconnectthepoweredmixer'sspeaker-level

outputs to passive loudspeakers.

• Whenshuttingdown,turnoffanyexternal

ampliﬁers or powered loudspeakers ﬁrst.

When powering up, turn on any external

ampliﬁers or powered loudspeakers last.

• Savetheshippingbox!

Read This Page!

We realize that you must be really keen

to try out your new powered mixer, but

please read the safety instructions on

page 2, and this page ﬁrst.

Setup

The PPM608 powered mixer is designed for ease of

operation, and to be set up quickly and easily.

Place the powered mixer in a position where it is easy

to reach the controls. All the controls and input

connection points are located on the front panel so you

can make quick adjustments and connections on stage.

Make sure there is at least 6 inches of airspace behind

the powered mixer for ventilation. There are two fans

inside the cabinet to cool the power ampliﬁer section.

Use the powered mixers in a nice clean and dry

environment, free from dryer lint and dust bunnies.

Connections

1. Be sure the rear-panel power switch is off

before making any connections.

2. Push the line cord securely into the IEC

connector on the rear panel, and plug the

other end into a 3-prong AC outlet that is

properly conﬁgured for the voltage of your

powered mixer.

3. Plug a balanced microphone into one of the

mic XLR (3-pin) connectors on the front panel.

Or you can connect any line-level signal

(keyboard, or guitar preamp) to a line input

jack using a TS or a TRS 1/4" plug.

4. You can connect a guitar directly to inputs 5 or

6 without need for a DI box, if you press the

hi-z switch on these channels.

5. The insert jacks are used if you want to connect

an external effects or dynamics processor into

the signal chain. See page 13 for more details.

6. Plug the speakers (4 ohms or greater) into the

speaker output jacks on the rear panel. If you

plug two speakers into a side, each speaker

must be 8 ohms or greater to maintain a 4-ohm

minimum load on the ampliﬁer. Use at least

18 gauge speaker cable with 1/4" TS plugs or

Speakon® plugs. For now, set the rear panel

power amp mode switch to stereo mains.

Don’tuseguitarcordsforspeakercables!

They’re not designed to handle speaker-level

signals and could overheat.

Please write your serial number here for future

reference (i.e., insurance claims, tech support,

return authorization, make dad proud, etc.)

Purchased at:

Date of purchase:

Specyfikacje produktu

Marka:	Mackie
Kategoria:	Konsola miksująca
Model:	PPM608

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Mackie PPM608, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Konsola miksująca Mackie

Mackie DLZ Creator Instrukcja

18 Września 2024

Mackie 3204VLZ4 Instrukcja

2 Września 2024

Mackie ProFX12v2 Instrukcja

23 Sierpnia 2024

Mackie PPM608 Instrukcja

18 Sierpnia 2024

Mackie 2404VLZ4 Instrukcja

4 Lipca 2024

Mackie PROFX16V2 Instrukcja

2 Lipca 2024

Instrukcje Konsola miksująca

Najnowsze instrukcje dla Konsola miksująca

Behringer XENYX QX2442USB Instrukcja

14 Października 2024

Koenic KHB 800 Instrukcja

14 Października 2024

Ibiza Sound MX801 Instrukcja

14 Października 2024

Pyle Pro PMXU83BT Instrukcja

12 Października 2024

Vonyx VMA106 Instrukcja

9 Października 2024

Røde RØDECaster Duo Instrukcja

8 Października 2024

Valcom V-9985 Instrukcja

8 Października 2024

Valcom V-9983 Instrukcja

8 Października 2024

Valcom V-9984 Instrukcja

8 Października 2024

Glemm MX 4816 Instrukcja

8 Października 2024