Instrukcja obsługi M-Audio Wizoo Darbuka

M-Audio Niesklasyfikowane Wizoo Darbuka

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla M-Audio Wizoo Darbuka (30 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/30
Darbuka • User Guide 4
3
English
Welcome to Darbuka
The overwhelming success of our first virtual musician - the Virtual Guitarist – proved that there’s a huge
demand for intelligent music tools that put you in the producers’ rather than the musicians’ chair; tools that
produce professional, authentic tracks based on real performances from skilled musicians. Why waste a lot of
time trying to imitate a Darbuka player with a MIDI track and some multisamples? Why not just hire the best
guys for the job?
Thanks to the proprietary FlexGroove engine Wizoo’s Virtual percussionists deliver nothing less than real
performances recorded by real musicians, with you in full control. Everything from the groove, the arrangement,
the timing and the tempo to the mix is in your hands, ready to make your song special.
The grooves of “Darbuka” were performed by Suat Borazan and Mohamed Zaki, two of the best Middle-
Eastern percussion players in the world and definitely big stars in their countries. Whether you’re into Middle-
Eastern music or just want to add the flavor to your tracks – these guys deliver with cultural credibility and
musical performances like nothing that was affordable for any of us – in the pre-Darbuka era that is.
Best regards,
System Requirements & Installation
System Requirements
< Minimum System Requirements PC
• Pentium® III 500 MHz or AMD7. (Pentium 4 / Athlon 1 GHz or faster recommended).
• 256 MB RAM.
• 2 GB free hard disk space.
• Windows® XP.
• VST 2.0 compatible host software.
• MIDI Interface.
• DVD-ROM drive for installation.
• Internet connection for software certification.
< Minimum System Requirements Mac
• Power Macintosh® G3 500 MHz.
(G4 or faster recommended)
• 256 MB RAM.
• 2 GB free hard disk space.
• Mac® OS X Version 10.3.2 or higher.
• VST 2.0, AU or RTAS compatible host software.
• MIDI Interface.
• DVD-ROM drive for installation.
• Internet connection for software activation.
(The actual performance of virtual instruments depends on the performance of the computer you use.)
4
3 English
To install Darbuka on a PC:
1. Power up your computer and launch Windows XP.
2. Insert the Darbuka DVD into the computer’s DVD drive.
3. The installer should start automatically, simply follow the instructions on the screen.
If the installer does not start automatically, open the Explorer or the Desktop window and double-click the
Darbuka DVD icon.
To uninstall Darbuka on a PC:
1. Open the Control Panel of your windows system.
2. Double Click ‘Add or Remove Programs’.
3. Select ‘Darbuka’ from the list.
4. Click ‘Remove’ and follow the instructions.
To install Darbuka on a Macintosh:
1. Power up your computer launching Mac OS X.
2. Insert the Darbuka DVD into the computer’s DVD drive. If the installer does not start automatically
double-click the Darbuka DVD icon.
3. Double-click the Installer icon and follow the instructions on the screen.
4. If your host platform supports Audio Unit or RTAS formats, then run the appropriate additional installer.
To uninstall Darbuka on a Macintosh:
1. Delete the Darbuka Data folder /Library/Audio/Plug-Ins/VST/Wizoo/Darbuka Data/
If you have installed the Darbuka content somewhere else on your Macintosh and are not sure where, use
the OSX Find feature ([Command][F]) and search for ‘Darbuka Data’
and
2. delete whichever Plug-ins you have installed:
VST/Library/Audio/Plug-Ins/VST/Wizoo/Darbuka.vst•
Audio Unit/Library/Audio/Plug-Ins/Components/Darbuka.component•
RTAS/Library/Application Support/Digidesign/Plug-Ins/Darbuka.rtas•
Product Certification
Product Certification is a fast and easy process that certifies your purchased Wizoo product for unlimited legal
use on your system. All Wizoo products – demo and full versions – require a certification.
The certification process is integrated into your Wizoo product and can be executed using a standard web
browser and email client – there is no need to install additional applications or hardware.
To certify your Wizoo product, proceed as follows:
1. Open your Wizoo plug-in in your host application (sequencer).
2. Click the “Setup” button on the user interface.
3. Enter the Product Certification Code provided on the card inside the Darbuka box into he field labelled
“Product Certification”.
Now you have two options. If your music computer is connected to the internet, proceed with “On-line
Certification”, if not refer to the “Off-line Certification” instructions below.
Darbuka • User Guide 4
5
English
< On-line Certification
1. Make sure you have established an internet connection.
2. Click the button “Certify Online”
3. The plug-in retrieves the Wizoo Certification form from the server and opens it in your web browser.
4. Enter the required information into all fields if possible, at least fill out the ones marked with an asterisk
(*). The #“Product Certificate”# field will automatically get filled out by the certification server.
5. Click the #“Submit”# button to send your certification request. Your certificate will be emailed to the
address you provided.
6. Receive your email and double-click the file attached to it. Your Wizoo product will be certified and
enabled for permanent use. As a confirmation, the “Product Certification” field in the Setup page will
read “Product certified ...”.
If your email gets received on a computer other than your music workstation, then please transfer the attached
file to your music computer and double-click it there to complete the certification process.
< Off-line Certification
If your music computer is not connected to the Internet, you can carry out certification on any other computer
with an internet connection – e.g. your office or home computer.
1. Click the button “Certify Off-line”.
2. Check your desktop folder for a html file named after the product. Transfer this file to your internet-
connected computer.
3. On your internet computer, establish a connection and double-click the html file. It will be opened in
your web browser and take you to the Certification form on the Wizoo server.
4. Fill out all fields if possible, the fields marked with an asterisk are obligatory. The #“Product Certificate”#
field will be filled out automatically.
5. Click the “Submit” button to complete your certification request. Your certificate will be emailed to the
address you provided.
6. Open your email and transfer the attached file to the computer where the Wizoo product is installed.
7. Here, double-click the file to complete certification. As a confirmation, the “Product Certification” field in
the Setup page will read “Product certified ...”.
Demo Licences
Included on your product installer DVD you will find other demo versions of our products. A demo version
allows you to test the full product over a period of 30 days.
To activate a Wizoo demo version simply follow the procedure described above but do not enter any Certification
code in the Product Certification dialog.
General Overview
Darbuka is a very easy to use yet sophisticated virtual percussion instrument that plays real Arabic and Middle
Eastern multi-track percussion recordings at any tempo, and gives you the freedom to edit numerous aspects
of every instrument’s performance and sound.
Let’s take a quick tour of Darbuka and check out the most important general features.
What Is A Style
A Style is a full authentic percussion arrangement, complete with up to fourteen individual Tracks, up to sixty-
one Patterns (or arrangements), fills, mixer settings and a lot of other important information. When you save
or load a Style you are basically saving or loading every parameter in Darbuka .

Specyfikacje produktu

Marka: M-Audio
Kategoria: Niesklasyfikowane
Model: Wizoo Darbuka

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z M-Audio Wizoo Darbuka, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane M-Audio

M-Audio

M-Audio SBX10 Instrukcja

17 Września 2024
M-Audio

M-Audio MidAir Instrukcja

16 Września 2024
M-Audio

M-Audio Delta 44 Instrukcja

16 Września 2024
M-Audio

M-Audio ProKeys 88sx Instrukcja

16 Września 2024
M-Audio

M-Audio Studiophile DX4 Instrukcja

16 Września 2024
M-Audio

M-Audio Solaris Instrukcja

16 Września 2024
M-Audio

M-Audio Firewire 1814 Instrukcja

15 Września 2024
M-Audio

M-Audio Revolution 7.1 Instrukcja

15 Września 2024
M-Audio

M-Audio X-Session UC-17 Instrukcja

15 Września 2024
M-Audio

M-Audio SAM Instrukcja

15 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024