Instrukcja obsługi M-Audio Ozonic

M-Audio Niesklasyfikowane Ozonic

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla M-Audio Ozonic (38 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/38

OZONIC

37-Key Audio/MIDI Interface and Controller

Introduction

Congratulations on purchasing M-Audio’s Ozonic—the completely integrated audio/MIDI production and performance tool designed to

streamline making music with your computer. Whether you’re an advanced user or are making music on the computer for the very ﬁrst time,

we strongly recommend that you read through this Users Guide to learn about proper installation, operation, and advanced functionality.

What’s in the Box

Your Ozonic package contains the following:

< Ozonic audio/MIDI interface

< CD-ROM containing Driver Software and User Manual in PDF format

< Printed QuickStart Guide

< CD-ROM containing Reason Adapted Express software

< 1 meter 6-pin to 6-pin IEEE 1394 (FireWire) cable

< 12VDC 1000mA power supply

About the Ozonic

A single IEEE 1394 cable connects the Ozonic to your computer’s FireWire port. If your PC is not equipped with a native FireWire port, you

may purchase a FireWire PCI card at any computer electronics retailer. Check M-Audio’s Support Knowledge Base on the M-Audio website

(http://www.m-audio.com) for information on compatible IEEE 1394/FireWire PCI adaptors.

IMPORTANT:

The Ozonic comes with a high quality six-pin to six-pin FireWire cable. We strongly suggest that you

use this cable, or one of equal quality, for optimum audio performance. Your computer is equipped

with either a six-pin or a four-pin interface, while the connector on the Ozonic is six-pin. The Ozonic

requires a powered six-pin FireWire connection in order to receive bus power; if your computer has

a four-pin connection or a 6-pin connection that does not provide power, you will need to use the

supplied power adapter with an adapter cable.

( Some computer manufacturers may use a different nomenclature to refer to their FireWire Note:

connections, such as Sony’s “iLink,” or simply “1394” — when in doubt, consult the owner’s manual

for your computer.)

IMPORTANT:

Reports have come to our attention of isolated problems when hot-plugging IEEE 1394 (a.k.a.

“FireWire”) devices. (Hot-plugging refers to making 1394/FireWire connections when one or more of

the devices—including the computer—is on.) When hot-plugging, there are rare occurrences where

either the FireWire peripheral or the FireWire port on the host computer is rendered permanently

inoperable. While M-Audio products adhere rigidly to the FireWire industry standard and pass

stringent internal testing, the possibility remains that hot-plugging your M-Audio FireWire interface

with some computers may result in the type of problem described here.

We strongly encourage you to protect your equipment by refraining from hot-plugging any bus-powered FireWire device, including the

M-Audio Ozonic. Connect your FireWire device while both the computer and FireWire device are powered off. Power on the FireWire

device, then turn the computer on last. If you are using bus power (systems with IEEE1394 6-pin connectors) make sure you make the cable

connection ﬁrst, then turn the FireWire device power switch on, and turn the computer system on last.

M-Audio is being proactive in investigating any issues that may adversely affect our customers. Please consult the Knowledge Base in the

Support section at www.m-audio.com for updates on this important issue.

Ozonic Overview

The Ozonic is a 37-note MIDI keyboard and a 24-bit/96kHz audio interface equipped with four inputs: one XLR that fully supports phantom-

powered microphones, one unbalanced 1/4” instrument jack, and two unbalanced 1/4” TS jacks. There are four analog outputs, two on 1/4”

TRS (balanced) and two on 1/4” TS (unbalanced) jacks. There is a stereo headphone output and MIDI in/out ports. All of these options make

the Ozonic a perfect integrated choice for performance or studio environments in a computer music set up.

The Ozonic’s easy-to-use software Control Panel provides you with powerful routing and mixing control. You can route any combination of

input pairs to any of the analog output pairs. This will give you complete control over the software returns from the computer host or the

hardware direct monitoring streams. You can take advantage of ultra-low latency software monitoring with built-in ASIO drivers, and near-

zero latency hardware direct monitoring.

With the Ozonic Headphone Stream Select function you can select which output pair you want to monitor, allowing you to pre-listen to an

audio stream before it goes live. The Ozonic also has hardware level controls for each output pair, allowing for real time mixing of the

different audio streams, including Direct Monitoring.

buttons (including Transport buttons). The keyboard also has an assignable Aftertouch control.

There are also 6 real-time function buttons that include Zone and Group controls and10 memory access buttons that can access the 20

on-board memories.

Features

MIDI Features:

*Powered 6-pin FireWire port required for bus-powered operation

Note: 6-Pin PCMCIA cards do not supply power

MIDI Data from controllers:

< MIDI control number

< RPN/NRPN

< GM/GM2/XG SysEx Messages

< All controls fully programmable

to MIDI controller number

< All controls fully programmable to MIDI channel

< Drawbar mode for faders

< Controller Mute, mutes controller output to avoid parameter

jumps

< Memory Dump via SysEx

< Enigma librarian and parameter editor for storing and

organizing setups

< Pitch Bend

< Program, Bank LSB, Bank MSB

Audio

< 4 x 6 analog I/O on 1 x XLR mic input, 1 x 1/4” instrument input

and 2 x 1/4” TS jacks

< 2 x TRS (balanced) and 2 x TS outputs

< 1 Headphone output

< Headphone Level knob

< Headphone Stream Select/Merge knob

< Direct Monitor Level knob

< Phantom Power On/Off switch for XLR input on rear of unit

and activation LED for Input 1 on top panel

< Gain Control dual concentric knob for Inputs 1 & 2

< Signal/Clip LEDs for each Gain Control

< Volume sliders for Outputs 1 & 2 and Outputs 3 & 4

Ports:

< External MIDI Out

< External MIDI In

< 2 x FireWire MIDI Out (one to MIDI Out, one to keyboard)

< 2 x FireWire MIDI In

MIDI Data from buttons:

< Note On

< Note On/Off Toggle

< MIDI CC On/Off Toggle

< Program, Bank LSB, Bank MSB presets

< MIDI Machine Control functions

< GM/GM2/XG SysEx Messages

Main Keyboard

< 37-note full-size, touch-sensitive, synth-action keybed, with

assignable Aftertouch controller

< 1 MIDI In / 1 MIDI Out port

< joystick controller

< 8 fully assignable rotary MIDI controller knobs

< 9 assignable sliders

< 14 assignable buttons (including Transport)

< 10 Preset Select buttons with 2 layers and dual-function

keypad

< assignable Pitch Bend and Modulation wheels

< 20 non-volatile memories

< 5 Transport Control buttons

< Octave and Transpose Up and Down buttons

< Sustain Pedal input

< Expression Pedal input

< 6 real-time function buttons

< 12 V DC power port

< On/Off button

Power:

< < FireWire bus powered* DC IN for external PSU if not using FireWire bus for power

Specyfikacje produktu

Marka:	M-Audio
Kategoria:	Niesklasyfikowane
Model:	Ozonic

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z M-Audio Ozonic, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane M-Audio

M-Audio SBX10 Instrukcja

17 Września 2024

M-Audio MidAir Instrukcja

16 Września 2024

M-Audio Delta 44 Instrukcja

16 Września 2024

M-Audio ProKeys 88sx Instrukcja

16 Września 2024

M-Audio Studiophile DX4 Instrukcja

16 Września 2024

M-Audio Solaris Instrukcja

16 Września 2024

M-Audio Firewire 1814 Instrukcja

15 Września 2024

M-Audio Revolution 7.1 Instrukcja

15 Września 2024

M-Audio X-Session UC-17 Instrukcja

15 Września 2024

M-Audio SAM Instrukcja

15 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024