Instrukcja obsługi Lorus Y719
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lorus Y719 (4 stron) w kategorii Oglądać. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/4
■ CHARACTE R I S T ICS
1 . T i m e a n d c a l e n d a r :
•Hour, minutes, seconds, year, month, date
and day of the week.
• Fully automatic calendar: The calendar
adjusts automatically for odd and even
months including February of leap years.
•Tim e in d ic at ion : Changeover between
12- and 24-hour indications is possible.
2. S to p wa t c h : Measures up to 99 hours, 59
minutes and 59 seconds in 1 100 second⁄
in crements for the first hour and in 1-
second increments thereafter.
•S p l i t t i m e m e a s u r e m e n t
3 . Co u n t d ow n t i m e r : Up to 99 hours and
59 minutes can be set in minute increments.
•
After the set time is up, the timer counts
up the time up to 59 minutes and 59 seconds.
• The set time can be used repeatedly unless
canceled.
4 . D a i l y a l a r m : The alarm can be set to
ring on a 24-hour basis.
•
H ou rl y t im e s ig n a l: Can be set to ring
every hour on the hour with a single beep.
5 . Du a l t im e : The time of a different time
zone can be displayed.
6. Il l umina ting lig ht: The light illuminates
the display for easy viewing in the dark.
■ BU T T O NS AND D I S P L AY S
I MNSTRUCTION ANUAL
CAL. Y717 (RYZ SERIES)
CAL. Y718 (RCP SERIES)
CAL. Y719 (RE2 SERIES) CAL. Y737 (RZM SERIES)
NREY737C 05-00
*The design of the liquid crystal panel differs
depending on the calibre. The functions
and method of operation, however, are the
same for all the four calibres.
Day
PM
mark
SecondsHour Minutes
C
D
B
A
Date
AD
Day Date
B C
Hour Minutes
Seconds
PM
mark
With each press of button “A”, the selection of
the mode can be made in the following order:
STOPWATCH
m o d e
T IM E /C A L EN D A R
m o d e ➡
➡
➡
➡➡
A
➡
➡
➡
➡
➡
➡
➡
➡
➡
➡
AA
T I M E R
m o d e
D U A L T I M E
m o d e
➡
➡
➡
➡
➡
➡
➡
➡
➡
➡
A
A
A L A R M m od e
■ TIME /CAL E N DAR MODE
DateDay
C
D
B
A
Minutes SecondsHour
1. Press button “A” to show the TIME/CALENDAR
mode.
2. Pr ess button “A” for 2 to 3 sec on d s to
show the time/calendar setting display.
The second digits start flashing.
3. Selection of the digits to be adjusted (flashing)
is made in the following order by pressing
button “C”.
Seconds
→
Minutes
→
Hour
→
Year
↓
↑
Month
←
Date
←
12- or 24-hour indication
4. Press button “D” to set the flashing digits.
One digit is advanced with each press of
the button. Digits except seconds and 12-
/24-hour indication move quickly by keeping
button “D” pressed.
●S e c o n d s s e t t i n g
Press button “D” in accordance with a
time signal. The seconds are reset to
“00” and start immediately.
When the seconds count any number
from “30” to “59” and button “D” is pressed,
one minute is added and the seconds
are reset to “00”.
5. After all the adjustments are completed,
press button “A” to return to the TIME/
CALENDAR mode.
N o t e s :
1. When setting the hour digits in the 12-
hour indication, check that AM/PM is set
properly. Only “PM” mark is displayed.
For the AM setting, there is no indication.
In the 24-hour indication, “24” is displayed.
2. Once the year, month and date have been
set, the day of the week is set automatically.
3. If the watch is left untouched in the time/
ca lendar setting display w ith the digits
flashing, it will automatic a lly retu r n to
the TIME/CALENDAR mode in 2 to 3 minutes.
Sh ow in g th e ca l e n d ar d i sp l ay
•Press and hold button “C” in the TIME/
CALENDAR mode. While the button is
kept pressed, the year, month and date are
displayed.
C
Year
Date
Month
Sto p wa tch o p e ra tio n
■STOP WATCH M OD E
• The stopwatch can measure up to 99 hours,
59 minutes and 59 seconds.
•It measures in 1⁄100 second increments for
the first hour and in 1-second increments
thereafter.
Press button “A” to show the STOPWATCH
mode. “Chrono” is displayed first, and then
the STOPWATCH mode appears.
PM mark
C
D
B
A
Standard measurement
C
S t a r t
C
S t o p
D
R e s e t
Accumulated elapsed time measurement
** Restart and stop of the stopwatch can be
repeated by pressing button “C”.
C
S t a r t
C
S t o p
C
R e s t a r t
** C
S t o p
D
R e s e t
S p l i t t i m e m e a s u r e m e n t
C
D
B
A
Split time
Accumulated
elapsed time
C
S t a r t
D
S p l i t 1
D
S p l i t 2
** C
S t o p
D
R e s e t
** Split time can be measured repeatedly by
pressing button “D”.
■TIMER M ODE
• Up to 99 hours and 59 minutes can be set in
minute increments.
• After the set time is up, the timer counts
up the time up to 59 minutes and 59 seconds.
• The set time can be used repeatedly unless
canceled.
Press button “A” to show the TIMER mode.
“TIMER” is displayed first, and then the TIMER
mode appears.
C
D
B
A
Current
time
Ti me r s e t tin g
1. Pr ess button “A” for 2 to 3 sec on d s to
show the timer setting display. The hour
digits start flashing.
2. Press button “C” to select the digits to be
adjusted (flashing).
Minutes
→
Hour
3. Press button “D” to set the flashing digits.
One digit is advanced with each press of
the button. Digits move quickly by keeping
button “D” pressed.
4.
After all the adjustments are completed, press
button “A” to return to the TIMER mode
.
* If the watch is left untouched in the timer
setting display with the digits flashing,
it will automatically return to the TIMER
mode in 2 to 3 minutes.
↑
Set time
C
S t a r t
C
S t o p
C
R e s t a r t
Time-up
* Warning
sound
beeps.
**
C
S t o p
** Restart and stop of the timer
can be repeated by pressing button
“C”.
* When the set time is up, a warning
sound beeps for 20 seconds. To
stop it manually, press any of
the buttons.
Ti me r o p e ra t io n
Press the buttons in the following order.
D
R e s e t
N o t e s :
1. Afte r th e se t time is up, th e
timer counts up the time up to
59 minutes and 59 seconds.
2. Once the timer is set, the set
time is retained and can be used
repeatedly unless it is readjusted.
Set
alarm time
C
DA
Alarm
mark
Hourly time
signal mark
Current time
1. Press button “A” to show the ALARM mode.
“ALARM” is displayed first, and then the
ALARM mode appears.
2. Pr ess button “A” for 2 to 3 sec on d s to
show the alarm setting display. The hour
digits (and “AM”/“PM” mark if the time is
set in the 12-hour indication) start flashing.
3. Press button “C” to select the digits to be
adjusted (flashing).
Minutes
→
Hour
↑
4. Press button “D” to set the flashing digits.
One digit is advanced with each press of
the button. Digits move quickly by keeping
button “D” pressed.
5.
After all the adjustments are completed, press
button “A” to return to the ALARM mode.
■ AL AR M MO D E
•The alarm can be set to ring on a 24-hour
basis.
N o t e s :
1. When the time function is displayed in the
24-hour indication, the alarm is also displayed
in the 24-hour indication.
2. When setting the hour digits in the 12-
hour indication, check that AM/PM is properly
set. In the 24-hour indication, there is no
indication.
3. If the watch is left untouched in the alarm
setting display with the digits flashing, it
will automatically return to the ALARM
mode in 2 to 3 minutes.
Engag ement/disengagement o f the alarm
& turning on/off of the hourly time signal
•
With each press of button “C” in the ALARM
mode, the alarm and hourly time signal are
engaged and disengaged in the following order.
Alarm engaged
Hourly time signal engaged
Both engaged
Neither engaged
•At the designated time, the alarm rings for
20 seconds and stop. To stop it manually,
press any of the buttons.
• The alarm can be tested by keeping button
“C” pressed in the ALARM mode.
Ch e ck in g th e se t a la rm tim e
•Press and hold button “D” in the TIME/
CA L ENDA R mode. While the button is
kept pressed, the alarm time that has been
set is displayed.
N o t e :
When the alarm is disengaged, the set alarm
time will not be displayed.
■ DUAL TIME M ODE
•The time of a different time zone can be
displayed.
C
D
B
A
Main time
Dual time
1. Press button “A” to show the DUAL TIME
mode. “dUAL” is displayed first, and then
the DUAL TIME mode appears.
2. Pr ess button “A” for 2 to 3 sec on d s to
show the dual time setting display. The
hour digits (and “AM”/“PM” mark if the
time is set in the 12-hour indication) start
flashing.
3. Press button “C” to select the digits to be
adjusted (flashing).
Minutes
→
Hour
↑
4. Press button “D” to set the flashing digits.
One digit is advanced with each press of
the button. Digits move quickly by keeping
button “D” pressed.
5. After all the adjustments are completed,
press button “A” to return to the DUAL
TIME mode.
N o t e s :
1. When the time function is displayed in the
24-hour indication, the dual time is also
displayed in the 24-hour indication.
2. When setting the hour digits in the 12-
hour indication, check that AM/PM is properly
set. In the 24-hour indication, there is no
indication.
3. If the watch is left untouched in the dual
time setting display with the digits flashing,
it will automatically return to the DUAL
TIME mode in 2 to 3 minutes.
■NOTE ON UN USUA L D I S P L A Y
While in the time/calendar setting display
with the digits flashing, the display as shown
below will appear if both buttons “C” and “D”
are pressed successively in a short time. This
is not a malfunction. Press button “A”, “C” or
“D” to return to the TIME/CALENDAR mode,
and then set the time/calendar again.
C
DA
■LUMIBRIT E W A T C H
(dial, hands, buttons, case, bezel, strap, etc.)
✩If your watch is a LORUS LUMIBRITE watch,
it has following features.
LORUS LUMIBRITE watches absorb and store
light energy from natural and artificial light
sources and emit light in the dark. They are
made of environmentally friendly material,
and therefore, are harmless to human beings
and the environment.
• With a full charg e, LORUS LU MIBRITE
watches glow in the dark hours longer than
conventional luminous watches of this type.
If exposed to a light of more than 500 lux
(i.e., the brightness of a typical office) for
approximately 10 minutes, or direct sunlight
for 2 minutes, they will glow for hours.
• Since LORUS LUMIBRITE watches emit
the light they store, the brightness w ill
decrease gradually over time. The length
of time they will glow may also differ slightly
depending on such factors as the brightness
of and distance from the light source used
to charge the watch.
Specyfikacje produktu
| Marka: | Lorus |
| Kategoria: | Oglądać |
| Model: | Y719 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Lorus Y719, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Oglądać Lorus
25 Września 2024
23 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
21 Września 2024
20 Września 2024
20 Września 2024
20 Września 2024
20 Września 2024
Instrukcje Oglądać
- Oglądać Braun
- Oglądać Epson
- Oglądać Geemarc
- Oglądać Boss
- Oglądać Polar
- Oglądać Marquant
- Oglądać Festina
- Oglądać Garmin
- Oglądać Casio
- Oglądać Citizen
- Oglądać Krontaler
- Oglądać Spin Master
- Oglądać Auriol
- Oglądać Skmei
- Oglądać Beper
- Oglądać Jaguar
- Oglądać Seiko
- Oglądać Skagen
- Oglądać La Crosse Technology
- Oglądać Velleman
- Oglądać Eta
- Oglądać Suunto
- Oglądać Michael Kors
- Oglądać Pulsar
- Oglądać Tommy Hilfiger
- Oglądać Invicta
- Oglądać Adidas
- Oglądać Oregon Scientific
- Oglądać Ferrari
- Oglądać Tissot
- Oglądać Omega
- Oglądać Breitling
- Oglądać Hugo Boss
- Oglądać Technaxx
- Oglądać Eurochron
- Oglądać Timex
- Oglądać Zenith
- Oglądać ADE
- Oglądać Alpina
- Oglądać Armani
- Oglądać Ascot
- Oglądać Asics
- Oglądać Alessi
- Oglądać Lotus
- Oglądać Lars Larsen
- Oglądać Orient
- Oglądać Calypso
- Oglądać Olivia Burton
- Oglądać Victorinox
- Oglądać Lambretta
- Oglądać Tudor
- Oglądać Holzkern
- Oglądać Hublot
- Oglądać Ebel
- Oglądać Christopher Ward
- Oglądać Edox
- Oglądać Gc
- Oglądać So & Co
- Oglądać Diesel
- Oglądać Karlsson
- Oglądać Bulova
- Oglądać Stuhrling
- Oglądać Easypix
- Oglądać Swatch
- Oglądać Luminox
- Oglądać Emporio Armani
- Oglądać Girard-Perregaux
- Oglądać Certina
- Oglądać TMI
- Oglądać Detomaso
- Oglądać Dugena
- Oglądać Rolex
- Oglądać TW Steel
- Oglądać Timberland
- Oglądać Spinnaker
- Oglądać Pilgrim
- Oglądać Davis
- Oglądać Habitat
- Oglądać Irox
- Oglądać ELYSEE
- Oglądać Danish Design
- Oglądać Daniel Steiger
- Oglądać Torgoen
- Oglądać WoodWatch
- Oglądać Executive
- Oglądać Nautica
- Oglądać Obaku
- Oglądać Fossil
- Oglądać Shinola
- Oglądać Tikkers
- Oglądać Sinn
- Oglądać Brera
- Oglądać Cover
- Oglądać Lucien Picard
- Oglądać Nike
- Oglądać Swiza
- Oglądać Mondaine
- Oglądać Slazenger
- Oglądać Ticwatch
- Oglądać Bering
- Oglądać Leff
- Oglądać Lynx
- Oglądać Maurice Lacroix
- Oglądać ICE Watch
- Oglądać Dakota
- Oglądać La Crosse
- Oglądać Rado
- Oglądać Puma
- Oglądać Gant
- Oglądać Tauchmeister
- Oglądać Just
- Oglądać Sempre
- Oglądać IWC
- Oglądać Digi-tech
- Oglądać Freestyle
- Oglądać Misfit
- Oglądać Breo
- Oglądać BML
- Oglądać Inter-Quartz
- Oglądać Haffstreuner
- Oglądać Hamilton
- Oglądać Kalenji
- Oglądać Longines
- Oglądać Junghans
- Oglądać Meister Anker
- Oglądać Naitica
- Oglądać Kogan
- Oglądać Guess
- Oglądać ESQ
- Oglądać ETT
- Oglądać Triwa
- Oglądać Raketa
- Oglądać Fromanteel
- Oglądać Balmain
- Oglądać Wonky Monkey
- Oglądać Audemars Piguet
- Oglądać Timer
- Oglądać Marc Jacobs
- Oglądać Iron Annie
- Oglądać Julie Julsen
- Oglądać Xonix
- Oglądać KRAEK
- Oglądać World Timer Chronograph
- Oglądać Versace
- Oglądać PAUL HEWITT
- Oglądać Rodania
- Oglądać Bruno Sohnle
- Oglądać Naviforce
- Oglądać Movado
- Oglądać Lacoste
- Oglądać MICHELE
- Oglądać Philip Watch
- Oglądać QQ
- Oglądać Fila
- Oglądać Ronda
- Oglądać TimeStyle
- Oglądać Radley London
- Oglądać PANERAI
- Oglądać Prologue
- Oglądać Zeppelin
- Oglądać Hype
- Oglądać HYT
Najnowsze instrukcje dla Oglądać
9 Października 2024
9 Października 2024
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024