Instrukcja obsługi Lorus W650


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lorus W650 (8 stron) w kategorii Oglądać. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
2 . S t o p w a t c h : Measures up to 10 hours with
1100-second readout.
8 l a p m e m o r y : Up to 8 lap times can be
stored in memory.
3 . C o u n t d o w n t i m e r :
P re s et t ime r : Four different lengths of time
(3, 5, 10 and 15 minutes) have been preset for
the timer.
A d j u s t a b l e t i m e r : Up to 9 hours and 59
minutes can be set in minutes.
Au to re pe at f u nc tion: After the set time is
up, the timer counts down the set time again
as many times as necessary.
4. Da ily a la rm : The alarm can be set to ring on
a 24-hour basis. At a designated time, the dis-
play is illuminated as the alarm rings.
H o u r l y t i m e s i g n a l : Ca n be set to ring
every hour on the hour with a single beep.
5 . L O R U S L I T E
The light evenly illuminates the display in the
dark.
A u t o i l l u m i n a t i o n f u n c t i o n
If it is turned on in the time/calendar setting
display, the display is illuminated with each
depression of a button to operate the watch.
While the stopwatch or timer is counting,
the display is illuminated every minute to
signal the lapse of time by turning on the
auto illumination function. In the stopwatch
function, it is activated for the first 19 minutes.
In the adjustable timer function, it is activated
for the last 19 minutes of the countdown.
C H A R A C T E R I S T I C S
1 . T i m e / c a l e n d a r d i s p l a y :
Hour, minutes, seconds, month, date and day
of the week.
Fully automatic calendar : Calendar adjusts
automatically for odd and even months includ-
ing February of leap years from the year 1995
up to the end of 2044.
T im e in d i c a t i on : Changeover between 12-
and 24-hour indications is possible.
B U T T ON S A N D D I SP L A Y S
Graphic display
B
Hour
Mode
selector A
M o d e S e l e c t io n o f C a l . W 6 5 0
With each depression of mode selector A, the
selection of the display can be made in the following
order.
T i m e / c a l e n d a r
d i s p l a y
S t o p wa t c h
d i s p l a y
A
T i m e r
d i s p l a y
A l a r m
d i s p l a y
A
AA
* If the confirmation sound is turned on, it beeps
when the display is changed by depressing mode
selector A.
* A flashing display mark indicates that the correspond-
ing function is in use.
HO W T O S E T T H E T I M E / C AL E N D A R
A N D A U T O I L L U M I N A T I O N
B C
Auto
illumination
mark
Hourly time
signal mark
Hour
1 . D e p r e s s m o d e
selector Ato show
the time/ca lendar
d i s p l a y .
1 . Turn mode selector
A to set TIME
a t t h e 1 2 o c l o c k
p o s i t i o n .
2. Depress button B for 2 to 3 seconds to show
the time/calendar setting display. EL-AUTO
is displayed together with flashing on mark.
3. Selection of the digits to be adjusted (flashing)
is made in the following order by depressing
button C.
Hour
Date
12- or 24-hour indication
Year
Month
Auto illumination*
(EL-AUTO on/off)
Seconds
Minutes
B C
Hourly time
signal mark
Mode
selector A
M o d e S e l e c t io n o f C a l . W 6 8 0
A”(AM)/
P”(PM)
mark
The display changes by turning mode selector A
clockwise or counterclockwise to set the desired
display mark at the 12 oclock position.
T i m e /c a l e n d a r
d i s p l a y
( T I M E )
A l a r m
d i s p l a y
( A L A R M )
P r e s e t t i m e r
d i s p l a y
(3 M IN . )
A d j u s t a b l e t i m e r
d i s p l a y
(
MIN .)
P r e s e t t i m e r
d i s p l a y
(1 5 M I N . )
* A flashing display mark indicates that the correspond-
ing function is in use.
S t o p w a t c h
d i s p l a y
( C H R O N O G . )
P r e s e t t i m e r
d i s p l a y
(1 0 M I N . )
* For details, refer to Auto Illumination Func-
tion below.
4. Depress button D to set the flashing digits.
One digit is advanced with each depression of
the button. Digits except seconds move quickly
by keeping button D depressed.
5. After all the adjustments are completed, de-
press button B to return to the time/calen-
dar display.
TIME
A”(AM)/
P”(PM)
mark
Display
marks
C
Auto
illumination
mark
Day
D
Hourly time
signal mark
Month
Alarm
mark
Date
Alarm
mark
Date
Month
Hour Minutes
Auto
illumination
mark
Day
TIME
D
LITE
button
A”(AM)/
P”(PM)
mark
Time/calendar
display mark
Month Date
Day
D
P r e s e t t i m e r
d i s p l a y
(5 M IN . )
TIME
Minutes
LITE button
Minutes Seconds Seconds
Seconds
Display
marks
Graphic display
A u to I l l u m i n a t i o n F u n c ti o n
With each depression of button D in the time/
ca lendar setting display, theEL-AUTO on
and EL-AUTO off marks appear alternately.
When theEL-AUTO on mark is displayed,
the auto illumina tion function is turned on.
When the EL-AUTO off mark is displayed, it
is turned off.
When it is turned on:
1. The display is illuminated with each depression
of a button to operate the watch.
2. While the stopwatch or timer is counting,
the display is illuminated every minute to
signal the lapse of time. In the stopwatch
function, the auto illumination function is
activated for the first 19 minutes. In the
adjustable timer function, it is activated for
the last 19 minutes of the countdown.
Sec on d s se ttin g
Depr ess button D in ac corda n ce with a time
signal. The seconds are reset to 00 and start
immediately.
When the seconds count any number from 30 to
59 and button D is depressed, one minute is
added and the seconds are reset to 00.
N o t e s :
1. When setting the hour digits in the 12-hour
indication, check that A(AM)/P(PM) mark
is set properly. In the 24-hour indication, there
is no indication.
2. Once the year, month and date have been set,
the day of the week is set automatically.
3. If the watch is left untouched in the time/cal-
endar setting display with the digits flashing,
it will automatically return to the time/calendar
display in 2 to 3 minutes.
Sto pw a tch Op e r a ti o n
Depress mode selector
A t o s h o w t h e
s t o p w a t c h d i s p l a y .
T u r n m o d e s e l e c t o r
A to se t CH RO N O
G. at the 12 oclock
p o s i t i o n .
Accumulated elapsed time measurement
C C
S t o pS t a r t
R e s e t D
** Accumulate repeatedly by depressing button
C.
CR e s t a r t
S t o p C
[ M e m o r y r e c a l l a f t e r m e a s u r e m e n t ]
1. Depress button B to show the memory recall
display. The oldest measurement stored in
memory is displayed.
2. Wity each depression of button D, the stored
data are recalled successively from the oldest
to the newest.
[ M e m o r y r e c a l l d u r i n g m e a s u r e m e n t ]
1. Depress button B to show the memory recall
display. The newest measurement stored in
memory is displayed.
2. With each depression of button D, the stored
data are recalled successively from the oldest
to the newest.
N o t e : Even if the digits are reset to 00 in the
stopwatch measurement, stored data is not
erased and can be recalled unless a new
measurement is started.
L a p t i m e m e a s u r e m e n t
Lap time refers to an elapsed time required to
cover a given section of the whole distance.
C DLap 1 D
C
Lap 2S t a r t
DS t o pR e s e t
N o t e s :
1. The lap number counts up to 99. After 99,
the number is displayed in two digits such as
00 for 100, 01 for 101, and so on.
2. Up to 8 lap times can be stored in memory. If
more than 8 lap times are measured, the measurements
over 8 will not be stored in memory.
Me m o r y F u n cti o n
Up to 8 lap times are automatically stored in
memory, and they can be recalled either during
or after the measurement.
Sel e ctio n of th e p re se t time
H ow t o U s e t h e P r e se t T i m e r
Hourly time
signal mark
Four different lengths of time (3, 5, 10 and 15
minutes) have been preset for the timer.
Auto
illumination
mark
T u r n m o d e
s e l e c t o r A t o
s e t t h e d e s i r e d
p r e s e t t i m e a t
t h e 1 2 o c l o c k
p o s i t i o n .
1 . D e p r e s s m o d e s e l e c t o r
A t o s h o w t h e t i m e r
d i s p l a y . T h e t i m e s e t
previously will be displayed.
2 . D e p r e s s b u t t o n D t o
select the desired preset
t i m e . S e l e c t i o n o f t h e
p r e s e t t i m e i s m a d e i n
t h e f o l l o w i n g o r d e r b y
d e p r e s s i n g b u t t o n D .
5 min .3 min.
Adjustable
timer
10 min.15 min.
→ →
C
C
Pre se t tim e r o p e rati o n
Depress buttons in the following order.
Stop
CC
D
Start Restart Stop
Restart and stop of the
timer can be repeated
by depressing button
C.
Warning
sound
beeps.
Time-up
* When the set time is up, a warning sound beeps
for 5 seconds as the display is illuminated. To
stop them manually, depress/turn mode selector
A, or depress button B,C, D or LIT E
button.
N o t e s :
1. After the countdown is repeated 99 times, the
number of times the countdown is repeated is
displayed in two digits such as 00 for 100,
01 for 101, and so on.
2. Once the timer is set, the set time is retained
and can be used repeatedly unless it is readjusted.
H o w t o U s e t h e A d j u s t a b l e T i m e r
The adjustable timer can be set up to 9 hours
and 59 minutes in minutes.
Ad ju sta b l e tim er s e tti n g
1 . D e p r e s s m o d e s e l e c t o r
A t o s h o w t h e t i m e r
d i s p l a y .
2 . D e p r e s s b u t t o n D t o
select the adjustable timer.
Selection of the adjustable
t i me r a n d p re se t ti m e r s
is m ade in t h e following
order by depressing button
“ D ” .
5 min .3 min.
Adjustable
timer
10 min.15 min.
→ →
1 . T u r n m o d e
s e l e c t o r A
to set
MIN.”
a t t h e 1 2
oc loc k p os i -
t i o n . T h e n ,
proceed to step
3 b e l o w ,
skipping step
“ 2 ” .
CHRONO
CHRONO
CHRONO
CHRONO
CHRONO
CHRONO
CHRONO
**
**
CHRONO
CHRONO
CHRONO
RECALL mark
D
B
Preset
time
Hour
Minutes
Number of
times the
countdown
is repeated
CHRONO
TIMER
D
C
B
BC
D
1/100
seconds
Seconds
Minutes
Stopwatch display mark
Hour
CHRONO
Lap No.
Seconds
Timer display mark
R e s e t
* Lap time measured and lap number remain
displayed for 10 seconds, and then the mea-
surement in progress and the current time
appear.
** Can repeat by depressing button D.
HOW T O USE THE TIM ER
Two types of timers (adjustable timer and preset
timer) are available.
After the set time is up, the timer counts down
the set time repeatedly. After the timer is used,
therefor e, be sure to reset it as the ba ttery
energy is consumed enormously to shorten the
battery life.
By turning on the button operation confirmation
sound, a beep sounds every minute to signal
the lapse of time.
By turning on the auto illumination function,
the display is illuminated every minute to signal
the lapse of time for the last 19 minutes of the
countdown. If the countdown is repeated more
than 10 times, however, the display will not be
illuminated.
HOW T O U SE T HE STOP WAT CH
The stopwatch can measure up to 9 hours, 59
minutes, 59 seconds and 99 in 1 100 seconds.
By turning on the button operation confirmation
sound, a beep sounds every minute to signal the
lapse of time.
By turning on the auto illumination function,
the display is illuminated every minute to signal
the lapse of time for the first 19 minutes.
* Even if the stopwatch display is changed to
an other while the mea surement is in prog-
ress, it continues counting properly. After
the stopwatch is used, however, be sure to
reset it as the b attery energ y is consumed
enormously to shorten the battery life.
* While the stopwatch is measuring, the graphic
display turns on and off repeatedly.
Current time
Hourly time
signal mark
Auto
illumination
mark


Specyfikacje produktu

Marka: Lorus
Kategoria: Oglądać
Model: W650

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Lorus W650, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Oglądać Lorus

Lorus

Lorus VX7P Instrukcja

23 Września 2024
Lorus

Lorus VX9P Instrukcja

22 Września 2024
Lorus

Lorus Z021 Instrukcja

21 Września 2024
Lorus

Lorus Z004 Instrukcja

20 Września 2024
Lorus

Lorus Kids R2345MX9 Instrukcja

20 Września 2024

Instrukcje Oglądać

Najnowsze instrukcje dla Oglądać

Casio

Casio G-Shock GMA-B800 Instrukcja

9 Października 2024
Rolex

Rolex Submariner Instrukcja

9 Października 2024
Casio

Casio GW-3000BD-1AER Instrukcja

9 Października 2024
Seiko

Seiko 6N76 Instrukcja

8 Października 2024
Seiko

Seiko 6N53 Instrukcja

8 Października 2024
Seiko

Seiko 6N52 Instrukcja

8 Października 2024
Seiko

Seiko 6G28 Instrukcja

8 Października 2024
Seiko

Seiko 4N30 Instrukcja

8 Października 2024
Seiko

Seiko 4227 Instrukcja

8 Października 2024
Seiko

Seiko 6N32 Instrukcja

8 Października 2024