Instrukcja obsługi Lorex LW4211B
Lorex
kamera bezpieczeństwa
LW4211B
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lorex LW4211B (2 stron) w kategorii kamera bezpieczeństwa. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
Resources
• Ensure your camera is placed as close to your receiver as possible.
• Reduce the number of obstructive materials between the camera and
the receiver. Concrete, brick, metal and wood are the most common
materials in your house that can cause poor signal strength.
To ensure the best possible wireless performance, it is
recommended to keep the following installation tips in mind
when choosing a location for the camera:
• Point the camera where there is the least amount of obstructions (i.e.,
tree branches).
• Install the camera where vandals cannot easily reach.
• This camera is rated for outdoor use. Installation in a sheltered location
is recommended.
• The camera uses the 2.4GHz band exclusively. Most new routers
support both 2.4GHz and 5GHz bands. It is recommended to use other
WiFi-connected devices using the 5GHz band when possible to ensure
the 2.4GHz band is not overcrowded.
• Other electronic devices such as microwaves, TVs, cordless phones,
and baby monitors can cause signal interference. It is recommended to
install the camera as far away from these devices as possible.
1080p MPX Wireless Security Camera
• 1080p MPX Wireless
Security Camera
• Wireless Receiver
• Antennas (×2)*
• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use of the product and handle with care.
• Use the camera within given temperature, humidity and voltage levels
noted in the camera’s specifications.
• Do not disassemble the camera.
• Do not point the camera directly towards the sun or a source of
intense light.
• Use only the supplied regulated power supply provided with the
product. Use of a non-regulated, non-conforming power supply can
damage the product and void the warranty.
• Periodic cleaning may be required. Use a damp cloth only. Do not use
any harsh, chemical-based cleaners.
* One each for camera and receiver.
Quick Start Guide
English Version 1.0
LW4211 SERIES
Package Contents
ATTENTION:
A REGULATED UL / CSA APPROVED power supply is REQUIRED for use
with this camera (included). Use of a non-regulated, non-conforming
power supply can damage this product and voids the warranty.
Safety Precautions
Installation Tips
Need Help?
Visit us online for
up-to-date software and
complete instruction
manuals
Click on the Downloads tab
4
Visit lorex.com
Search for the model number
of your product
Click on your product in the
search results
3
2
1
www.lorex.com
Dimensions
5.4” / 138mm
6.1” / 155mm
2.8” / 70mm
4.5” / 114mm
4.4” / 113mm
LW4211_QSG_EN_R1
Copyright © 2018 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right
to modify product design, specifications and prices, without notice and without
incurring any obligation. E&OE. All rights reserved.
• For a full list of compatible recorders, visit lorex.com/compatibility
• Not intended for submersion in water.
• This camera includes an Auto Mechanical IR Cut Filter. When the
camera changes between Day/Night viewing modes, an audible clicking
noise may be heard from the camera. This clicking is normal, and
indicates that the camera filter is working.
Disclaimers
• Power Adapters (×2)*
• Mounting Kits (×2)*
• Allen Key
• BNC Adapter
LW4211_QSG_EN_R1
To install your camera:
Installing the Camera
Cable
Notch
IMPORTANT:
• Test your camera prior to selecting a permanent mounting location by
temporarily connecting the camera and cable to your DVR.
• Ensure the camera is no more than 700ft (213m) away from the wireless
receiver in an open field (with line of sight between antennas). The range
is approximately 115ft (35m) or less in an indoor environment, depending
if there are walls or obstructions between the camera and receiver.
• Review the ‘Installation Tips’ section before choosing a mounting
location for the camera.
Before Installing the Camera
• Decide whether to run the cables through the
wall / ceiling (drilling required) or along the
wall / ceiling.
• If you run the cables along the wall / ceiling,
you must run the cable through the cable
notch on the base. This will keep the camera
base flush to the surface when mounted.
1. Use the included mounting template or camera base to mark
holes for the included mounting screws. Drill holes where
marked.
NOTE: Ensure one of the included antennas is properly
attached to the camera.
2. Mount the camera to the mounting surface using the
included mounting screws (×3).
NOTE: Use the included drywall anchors (×3) if installing
into drywall.
3. Adjust the angle of the camera until the desired view is set.
Tighten the screws to secure the camera position.
Mounting Surface
Camera Base
Drywall Anchors (×3)
Mounting Screws (×3)
4. Connect the camera power adapter to the camera cable.
Connect the power adapter to a power outlet.
5. Remove protective film from the camera lens.
Installing Multiple Wireless Cameras
When installing multiple digital wireless security cameras in the same
environment, maintain at least 4” / 10cm between the receivers to
optimize camera performance.
NOTE: It is not recommended to install more than 3 digital wireless
security cameras in the same environment to maintain optimal video
frame rate performance.
A. Use the included Allen key to
loosen the adjustment screw
on the camera base. Rotate the
arm of the camera up to 360°,
then tighten the screw.
B. Use the included Allen key to
loosen the adjustment screw.
Bend the arm of the camera up
to 90°, then tighten the screw.
C. Use the included Allen key to C
Setting Up the Receiver
1. Ensure one of the included antennas is properly attached to the
receiver.
2. Connect the receiver’s BNC cable to a compatible DVR’s video
input*.
3. Connect the receiver power adapter to the receiver. Connect the
power adapter to a power outlet.
NOTE: Make sure to first connect and power on the camera before
powering on the receiver.
4. (Optional) Use the included double-sided tape to securely attach
the receiver to a flat surface.
(OR)
Secure the receiver to a flat surface using the included mounting
screws.
Connecting the receiver directly to DVR:
Connecting the receiver to DVR using a BNC extension cable:
Connect the BNC connector
to a video input on your DVR.
Connect the female power head
to the included receiver power
adapter.
Receiver DVR
Male Power Female Power
**
* This camera is only compatible with select DVRs. For a full list of
compatible recorders, visit lorex.com/compatibility.
** Not included. Compatible BNC extension cable available at lorex.com.
Connect the BNC
connector on the extension
cable to the included
BNC adapter. Connect
the adapter to the BNC
connector on the receiver.
Connect the male powe
head to the female
power head on the
receiver.
Audio Settings
ATTENTION:
Audio recording without consent is illegal in certain jurisdictions. Lorex Corporation
assumes no liability for use of its products that does not conform with local laws.
Audio is disabled by default. You can enable audio through a
compatible Lorex DVR. For a full list of compatible recorders, visit
lorex.com/compatibility
NOTE: These instructions are based on current DVR interface. For
the most up-to-date instructions, see your DVR’s instruction manual
on .
lorex.com
B
BNC Adapter
Pairing the Camera
The camera and receiver have already been paired out of the box. If for some
reason the pairing is lost, follow these steps to pair the camera and receiver.
Pair Button on
the Camera
To pair the camera and receiver:
Pair Button on
the Receiver
1. Make sure that the camera and receiver are
both powered up and all antennas properly
attached.
2. Press the pair button on the receiver (see
Figure 1).
3. Press and hold the pair button on the back
of the camera within 30 seconds of pressing
the pair button on the receiver (see Figure
2). If successful, live video from the camera
will appear on the monitor.
Figure 1
Figure 2
To enable camera audio on LHV / DV Series DVRs:
1. In Live View, right-click and click . Enter the system user Main Menu
name and password.
2. Click ( ) and select Recording Recording> .
A
loosen the adjustment screw furthest from the camera base. Rotate
the camera until it is level with the viewing area, then tighten the
screw.
3. Under , select Channel
the channel where the
audio-capable camera
is connected.
4. Under , Audio/Video
check the box on the
left to enable audio
recording.
5. Under , Audio Format
select the format
that will be used to
record audio. is G711a
recommended.
6. Click to save changes.OK
7. (Optional) Under , check the middle box to enable audio Audio/Video
when viewing cameras through the computer or mobile applications.
Specyfikacje produktu
| Marka: | Lorex |
| Kategoria: | kamera bezpieczeństwa |
| Model: | LW4211B |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Lorex LW4211B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje kamera bezpieczeństwa Lorex
24 Września 2024
24 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
21 Września 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
Instrukcje kamera bezpieczeństwa
- kamera bezpieczeństwa Sony
- kamera bezpieczeństwa Tenda
- kamera bezpieczeństwa Motorola
- kamera bezpieczeństwa TP-Link
- kamera bezpieczeństwa Hikvision
- kamera bezpieczeństwa EZVIZ
- kamera bezpieczeństwa Panasonic
- kamera bezpieczeństwa Canon
- kamera bezpieczeństwa Nedis
- kamera bezpieczeństwa Reolink
- kamera bezpieczeństwa TRENDnet
- kamera bezpieczeństwa Tesla
- kamera bezpieczeństwa D-Link
- kamera bezpieczeństwa Ring
- kamera bezpieczeństwa Blaupunkt
- kamera bezpieczeństwa Grundig
- kamera bezpieczeństwa Honeywell
- kamera bezpieczeństwa Strong
- kamera bezpieczeństwa Swann
- kamera bezpieczeństwa Gembird
- kamera bezpieczeństwa JVC
- kamera bezpieczeństwa Trust
- kamera bezpieczeństwa V-TAC
- kamera bezpieczeństwa Dahua Technology
- kamera bezpieczeństwa Eufy
- kamera bezpieczeństwa Marshall
- kamera bezpieczeństwa Somfy
- kamera bezpieczeństwa Uniden
- kamera bezpieczeństwa Netgear
- kamera bezpieczeństwa Thomson
- kamera bezpieczeństwa Ferguson
- kamera bezpieczeństwa Pyle
- kamera bezpieczeństwa Intellinet
- kamera bezpieczeństwa Setti+
- kamera bezpieczeństwa Vivotek
- kamera bezpieczeństwa Speco Technologies
- kamera bezpieczeństwa EtiamPro
- kamera bezpieczeństwa Petcube
- kamera bezpieczeństwa First Alert
- kamera bezpieczeństwa AirLive
- kamera bezpieczeństwa Maginon
- kamera bezpieczeństwa Axis
- kamera bezpieczeństwa Abus
- kamera bezpieczeństwa Elro
- kamera bezpieczeństwa Hama
- kamera bezpieczeństwa Equip
- kamera bezpieczeństwa ZKTeco
- kamera bezpieczeństwa Yale
- kamera bezpieczeństwa Technaxx
- kamera bezpieczeństwa Y-cam
- kamera bezpieczeństwa Grandstream
- kamera bezpieczeństwa Alecto
- kamera bezpieczeństwa Avidsen
- kamera bezpieczeństwa Foscam
- kamera bezpieczeństwa Lumens
- kamera bezpieczeństwa Monacor
- kamera bezpieczeństwa Smartwares
- kamera bezpieczeństwa Vitek
- kamera bezpieczeństwa Alfatron
- kamera bezpieczeństwa Fenton
- kamera bezpieczeństwa PTZ Optics
- kamera bezpieczeństwa KJB Security Products
- kamera bezpieczeństwa Inovonics
- kamera bezpieczeństwa HiLook
- kamera bezpieczeństwa Profile
- kamera bezpieczeństwa Swan
- kamera bezpieczeństwa Acti
- kamera bezpieczeństwa Eminent
- kamera bezpieczeństwa Flir
- kamera bezpieczeństwa GeoVision
- kamera bezpieczeństwa Targa
- kamera bezpieczeństwa Iget
- kamera bezpieczeństwa Lanberg
- kamera bezpieczeństwa WyreStorm
- kamera bezpieczeństwa Storage Options
- kamera bezpieczeństwa Swisstone
- kamera bezpieczeństwa Sinji
- kamera bezpieczeństwa SAB
- kamera bezpieczeństwa Sricam
- kamera bezpieczeństwa Brinno
- kamera bezpieczeństwa Nordval
- kamera bezpieczeństwa Jablocom
- kamera bezpieczeństwa Defender
- kamera bezpieczeństwa Feelworld
- kamera bezpieczeństwa Beseye
- kamera bezpieczeństwa Pelco
- kamera bezpieczeństwa Exacq
- kamera bezpieczeństwa Brickcom
- kamera bezpieczeństwa Home Protector
- kamera bezpieczeństwa Escam
- kamera bezpieczeństwa Mr Safe
- kamera bezpieczeństwa Duramaxx
- kamera bezpieczeństwa EasyN
Najnowsze instrukcje dla kamera bezpieczeństwa
5 Października 2024
5 Października 2024
5 Października 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024