Instrukcja obsługi Lorex LW2701AC1

Lorex kamera bezpieczeństwa LW2701AC1

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lorex LW2701AC1 (2 stron) w kategorii kamera bezpieczeństwa. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

LW2701AC1 SERIES QSG_EN_R2 Page 1

www.lorextechnology.com

CONTENTS:

Quick Start Guide

Digital Wireless Color

Camera with Stand

Wireless Antenna

for camera

Power Adaptor

for camera*

• Mount the camera indoors or outdoors. For outdoor

installation, mount it in a sheltered place where it is not

directly exposed to rain or snow.

• Aim the Cameras to best optimize the viewing area:

Select a location for the camera that provides a clear

view of the area you want to monitor, which is free from

dust, and is not in line-of-sight to a strong light source

or direct sunlight.

• Avoid installing the cameras where there are thick

walls, obstructions, or interference (i.e. transformers,

microwave ovens or other electrical equipment)

between the Cameras and the Receiver.

• Select a location for the camera that has an ambient

temperature between 14°F~122°F (-10°C~50°C)

• Before starting permanent installation, have another

person hold the camera for you while you verify its

performance by observing the image on a monitor.

INSTALLING THE CAMERA

Before you install the camera, carefully plan where and how it will be

positioned, and where you will route the cable that connects the

camera to the power adaptor.

INSTALLATION WARNINGS

1. Carefully unpack the Camera.

2. Mount the stand to the wall:

• Mark the position of the

screw holes on the wall.

• Drill holes and insert the

drywall plugs as needed.

• Firmly attach the stand

to the wall using the

provided screws.

3. Attach the Antenna to the

Camera prior to mounting.

4. Place the camera in the

desired mounting position.

Tighten the thumbscrews

to secure the camera to the

Stand. Adjust the angle of

the camera until the

desired view is set.

*May not be exactly as shown

NOTE: AVOID INSTALLING IN A

LOCATION WHICH REQUIRES

THE WIRELESS SIGNAL TO PASS

THROUGH CEMENT, CONCRETE

AND METAL STRUCTURES. THIS

WILL REDUCE THE

TRANSMISSION RANGE.

Mounting

Hardware Kit

COLOR DIGITAL WIRELESS INDOOR/OUTDOOR

ACCESSORY MOTION CAMERA

LW2701AC1 SERIES - QUICK START GUIDE

CAMERA OVERVIEW

1. Passive IR motion sensor for more accurate PIR Sensor:

motion recording.

2. Built-in microphone underneath camera body.Microphone:

3. Camera lens.Lens:

4. Night vision IR LEDs used for viewing in Night Vision IR:

complete darkness.

5. Speaker for two-way audio.Speaker:

6. Pairing button. Pair:

7. Wireless antenna.Antenna:

8. Power Cable: Connect the included power adapter to the

cable extending from the camera.

LW2701AC1 SERIES QSG_EN_R2 Page 2

www.lorextechnology.com

CONNECTING CAMERA POWER ADAPTOR

Connect one end of the camera Power Adaptor to the camera and the other end to an electrical outlet.

It’s all on the Web

For detailed setup information,

please refer to your User’s Manual.

For additional information, please

visit our website

www.lorextechnology.com

1. Press on the wireless receiver or remote control.MENU

2. From the Main Menu, select and press the Pairing

Enter button.

3. Select Camera 3 Camera 4 or and press the Enter

button.

4. Following the on-screen prompt, press the Pair button

on the rear panel of the camera. You have 30 seconds

to press the PAIR button on the camera. Once paired,

the camera will be immediately displayed on-screen.

NOTE: If you do press the Pair button on the camera during

the 30 second pairing window, repeat steps 1~5 to try the

pairing process again.

Pairing Button

ADDING THE ACCESSORY CAMERA TO YOUR SYSTEM

The Pairing Function assigns each camera to a different

channel on the wireless receiver (connect up to 4

Cameras), and is necessary for conﬁguring additional

cameras. By default the cameras that came with the

LW2702 system are assigned to channel no. 1 and 2.

NOTE: It is highly recommended to pair the Accessory

Camera to the Receiver before permanently mounting the

camera. For detailed information, please check the

owners manual for the LW2702 system available at

www.lorextechnology.com

Connect power adaptor to

local 120V AC power outlet

COLOR DIGITAL WIRELESS INDOOR/OUTDOOR

ACCESSORY MOTION CAMERA

LW2701AC1 SERIES - QUICK START GUIDE

Specyfikacje produktu

Marka:	Lorex
Kategoria:	kamera bezpieczeństwa
Model:	LW2701AC1
Kolor produktu:	Szary
Wysokość produktu:	195 mm
Szerokość produktu:	70 mm
Głębokość produktu:	188 mm
Waga produktu:	410 g
Szerokość opakowania:	262 mm
Wysokość opakowania:	75 mm
Głębokość opakowania:	95 mm
Technologia łączności:	Bezprzewodowy
Wyjścia słuchawkowe:	1
Przeznaczenie:	Wewnętrz i na wolnym powietrzu
Zakres temperatur (eksploatacja):	-10 - 50 °C
Układ:	Pudełko
Tryb nocny:	Tak
Wi-Fi:	Tak
Przewodowa sieć LAN:	Nie
Zintegrowany czytnik kart:	Nie
Waga wraz z opakowaniem:	600 g
Maksymalny zasięg działania:	135 m
Zasilanie:	9 VDC
Maks. rozdzielczość:	640 x 480 px
Zużycie energii:	350 mA
System dźwięku:	2-drożny
Obsługiwane rozdzielczości grafiki:	640 x 480 (VGA)
Wbudowany mikrofon:	Tak
Zestaw do montażu:	Tak
Typ przetwornika obrazu:	CMOS
Zoom optyczny:	- x
Typ diody LED:	Podczerwień
Kąt pola widzenia (FOV):	64 °
Min. Oświetlenie:	0 lx
System formatu sygnału analogowego:	NTSC
Wbudowany HDD:	Nie
Odległość widzenia nocnego (Night Vision):	12 m