Instrukcja obsługi Lincoln Electric Viking 5X4 Shade 11
Lincoln Electric
No categorizado
Viking 5X4 Shade 11
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lincoln Electric Viking 5X4 Shade 11 (8 stron) w kategorii No categorizado. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/8
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com
• World's Leader in Welding and Cutting Products •
VIKING 5X4 SHADE 11 HELMET™
4.50 x
x
x
xx 5.25 STANDARD REPLACEMENT LENS
OPERA
OPERA
OPERA
OPERAOPERAT
T
T
TTOR’S MANUAL
OR’S MANUAL
OR’S MANUAL
OR’S MANUALOR’S MANUAL
IM10170
February 2014
Copyright © Lincoln Global Inc.
TABLE OF CONTENTS Page
SAFETY WARNINGS – READ BEFORE USING 1
OPERATING INSTRUCTIONS 2
HELMET CARE AND MAINTENANCE 3
SHADE GUIDE SETTINGS AND LENS REPLACEMENT
3
FILTER PLATE AND LENS REPLACEMENT 4
WARRANTY INFORMATION 5
REPLACEMENT PARTS 5
SAFETY WARNINGS – READ BEFORE USING
ARC Rays can injure eyes and burn skin
• Before welding, always inspect helmet and filter lens to be sure they are fitted
properly, in good condition and not damaged.
• Check to see that the clear lens is clean and securely attached to the helmet.
• Always wear safety glasses or goggles under the welding helmet and protective
clothing to protect your skin from radiation, burns and spatter.
• Ensure that optical radiation from other welder’s arcs in the immediate area
does not enter in from behind the helmet and auto-darkening filter.
Note: Auto-darkening filters in Lincoln helmets are designed to protect the user against harmful
ultra-violet and infrared rays both in the dark and light states. No matter what shade the filter is
set to, the UV/IR protection is always present.
FUMES AND GASES can be dangerous to your health.
• Keep your head out of fumes.
• Use enough ventilation or exhaust at the arc or both to keep fumes and gases
from your breathing zone and general area.
• When welding with electrodes which require special ventilation such as
stainless or hard facing (see instructions on container or MSDS) or on
lead or cadmium plated steel and other metals or coatings which pro-
duce highly toxic fumes, keep exposure as low as possible and within
applicable OSHA PEL and ACGIH TLV limits using local exhaust or
mechanical ventilation. In confined spaces or in some circumstances,
outdoors, a respirator may be required. Additional precautions are also
required when welding on galvanized steel.
1
WARNING
Refer to http://www.lincolnelectric.com/safety
for additional safety information.
Specyfikacje produktu
| Marka: | Lincoln Electric |
| Kategoria: | No categorizado |
| Model: | Viking 5X4 Shade 11 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Lincoln Electric Viking 5X4 Shade 11, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje No categorizado Lincoln Electric
17 Września 2024
Instrukcje No categorizado
- No categorizado Metra
- No categorizado Emos
- No categorizado Graco
- No categorizado CRUX
- No categorizado Adj
- No categorizado FireKing
- No categorizado Xlyne
Najnowsze instrukcje dla No categorizado
18 Września 2024
11 Września 2024
9 Września 2024
7 Września 2024
6 Września 2024
5 Września 2024
5 Września 2024