Instrukcja obsługi LiftMaster MASTDCBB


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LiftMaster MASTDCBB (47 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/47
MADCBB, MATDCBB,
MASDCBB, & MASTDCBB
H EAVY -DU T Y DC BARR I ER GATE OPE RA TO R
O W N E R ' S M A N U A L
RADIO
RECEIVER
INCLUDED
IMPORTANT: Read and understand Warranty Page first. Batteries (included) MUST be connected for proper
operation of operator. Use (2) LiftMaster 12 Vdc 7AH (Part # MBAT).
MEGA ARM &
MEGA SPRINT
MEGA ARM TOWER &
MEGA SPRINT TOWER
The Chamberlain Group, Inc.
845 Larch Avenue
Elmhurst, Illinois 60126-1196
www.liftmaster.com
2
SAFETY 2-4
Safety Symbol and Signal Word Review 2
UL325 Model Classifications 3
Safety Installation Information 4
INTRODUCTION 5
Features 5
Tools Needed 5
Operator Specifications 5
INSTALLATION 6-7
Install the Concrete Pad and Conduit 6
Attach the Operator to the Concrete Pad 7
Install the Barrier Arm 7
WIRING 8-11
Power Wiring 8
Input Commands Connections 9
Accessory and Relay Connections 10
Battery Installation 10
Primary/Second Wiring 11
INSTALL THE RECEIVER 12
FEATURES AND FUNCTIONS 13-14
S1 DIP Switches 13
S2 DIP Switches 14
ADJUSTMENTS 15
Instant Reverse Device (IRD) 15
Adjust the Barrier Arm 15
OPERATION AND MAINTENANCE 15-16
Important Safety Instructions 15
General Service 16
Shear Pin Replacement 16
Battery 16
ADDITIONAL FEATURES 17-20
Suggested Loop Sensor Locations 17
Trap Instructions 18
Sequence Access Management System (SAMS) with "Memory" 19
Control Board Layout 20
TROUBLESHOOTING 21
Battery Checkout 21
Gate Not Operating 21
Troubleshooting Chart 21
REPAIR PARTS 22
Part Numbers and Descriptions 22
Parts Shipped 22
Mega Arm Tower Unique Parts List 22
Mega Arm Options Parts List 22
ACCESSORIES 23
WARRANTY POLICY 24
TABLE OF CONTENTS
When you see these Safety Symbols and Signal Words on the following pages, they
will alert you to the possibility of serious injury or if you do not comply with death
the warnings that accompany them. The hazard may come from something
mechanical or from electric shock. Read the warnings carefully.
When you see this Signal Word on the following pages, it will alert you to the
possibility of damage to your gate and/or the gate operator if you do not comply
with the cautionary statements that accompany it. Read them carefully.
IMPORTANT
NOTE:
BEFORE attempting to install, operate or maintain the operator, you must read and
fully understand this manual and follow all safety instructions.
DO NOT attempt repair or service of your commercial door and gate operator
unless you are an Authorized Service Technician.
SAFETY » SAFETY SYMBOL AND SIGNAL WORD REVIEW
MECHANICAL
ELECTRICAL
WARNING: This product can expose you to chemicals including
lead, which are known to the State of California to cause cancer or
birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
3
CLASS I RESIDENTIAL VEHICULAR GATE OPERATOR
A vehicular gate operator (or system) intended for use in a home of one-to four single family dwellings, or a garage or
parking area associated therewith.
I
II
III
IV
CLASS II COMMERCIAL/GENERAL ACCESS VEHICULAR GATE OPERATOR
A vehicular gate operator (or system) intended for use in a commercial location or building such as a multi-family housing unit
(five or more single family units) hotel, garage, retail store or other building servicing the general public.
CLASS III INDUSTRIAL/LIMITED ACCESS VEHICULAR GATE OPERATOR
A vehicular gate operator (or system) intended for use in a industrial location or building such as a factory or loading dock
area or other location not intended to service the general public.
CLASS IV RESTRICTED ACCESS VEHICULAR GATE OPERATOR
A vehicular gate operator (or system) intended for use in a guarded industrial location or building such as an airport security
area or other restricted access locations not servicing the general public, in which unauthorized access is prevented via
supervision by security personnel.
SAFETY ACCESSORY SELECTION
All UL325 compliant LiftMaster gate operators will accept external entrapment
protection devices to protect people from motorized gate systems. UL325 requires
that the type of entrapment protection correctly matches each gate application.
Below are the six types of entrapment protection systems recognized by UL325 for
use on this operator.
ENTRAPMENT PROTECTION TYPES
Type A: Inherent obstruction sensing system, self-contained within the operator.
This system must sense and initiate the reverse of the gate within two
seconds of contact with a solid object.
Type B1: Connections provided for a non-contact device, such as a photoelectric eye
can be used as a secondary protection.
Type B2: Connections provided for a contact sensor. A contact device such as a gate
edge can be used for secondary protection.
Type C: Inherent adjustable clutch or pressure relief valve.
Type D: Connections provided for a control requiring continuous pressure to
operate the operator open and close.
Type E: Built-in audio alarm. Examples include sirens, horns or buzzers.
NOTE: UL requires that all installations must have
warning signs placed in plain view on both sides of the
gate to warn pedestrians of the dangers of motorized
gate systems.
Moving Gate Can Cause
Injury or Death
KEEP CLEAR! Gate may move at any
time without prior warning.
Do not let children operate the gate or
play in the gate area.
This entrance is for vehicles only.
Pedestrians must use separate entrance
The chart above illustrates the entrapment protection requirements for each of the
four UL325 classes.
In order to complete a proper installation you must satisfy the entrapment
protection chart shown above. That means that the installation must have one
primary means of entrapment protection and one independent secondary means of
entrapment protection. Both primary and secondary entrapment protection
methods must be designed, arranged or configured to protect against entrapments
in both the open and close directions of gate travel.
For Example: For a slide gate system that is installed on a single-family
residence (UL325 Class I) you must provide the following: As your primary type of
entrapment protection you must provide Type A inherent (built into the operator)
entrapment sensing and at least one of the following as your secondary
entrapment protection: Type B1- Non-contact sensors such as photoelectric eyes,
Type B2- Contact sensors such as gate edges or Type D- Constant pressure control.
Class
I & II
Class III
Class IV A, B1, B2, C or D A, B1, B2, C, D or
E
A, B1, B2, D or EA, B1, B2 or D
A, B1 or B2 A, B1, B2, D or E A, B1, B2 or C
A, B1, B2, or C
A or C
B1, B2 or D
A
Slide Gate Operator Swing & Gate Barrier
(Arm) Operator
UL325
Installation
Class Primary
Type Secondary
Type
Secondary
Type Primary
Type
A, B1, B2, C, D
or E
SAFETY » UL325 MODEL CLASSIFICATIONS
GATE OPERATOR ENTRAPMENT PROTECTION
UL325 MODEL CLASSIFICATIONS
UL325 ENTRAPMENT PROTECTION REQUIREMENTS


Specyfikacje produktu

Marka: LiftMaster
Kategoria: Niesklasyfikowane
Model: MASTDCBB

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z LiftMaster MASTDCBB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane LiftMaster

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024