Instrukcja obsługi LiftMaster LC36M41

LiftMaster Niesklasyfikowane LC36M41

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LiftMaster LC36M41 (22 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/22

LiftMaster

300 Windsor Drive

Oak Brook, IL 60523-1510

Model LC36M, LC36M41

LiftMaster® Monitored Light Curtain

NOTE: (Images not to scale)

Monitored

Light Curtain

Receiver

Monitored

Light Curtain

Transmitter

Primary entrapment protection

ONLY

6" (15 cm) maximum above and a minimum

of 3" (7.62 cm) from the ﬂoor

6" (15 cm) maximum above

and a minimum of 3" (7.62 cm)

from the ﬂoor

To prevent possible SERIOUS INJURY or DEATH from a closing door:

• Be sure to DISCONNECT POWER to the operator BEFORE installing the

Monitored Light Curtain .

• The door MUST be in the fully opened or closed position BEFORE

installing the Monitored Light Curtain .

• Mount bottom optical sensor of Monitored Light Curtain no higher than

3" to 6" above the ground if used as primary entrapment protection.

• Correctly connect and align the Monitored Light Curtain transmitter

and receiver.

• The Monitored Light Curtain is for use with LiftMaster

® Commercial

Doors. Use with ANY other product voids the warranty.

• DO NOT use this product for the protection of dangerous machinery

or in explosive atmospheres or radioactive environments. Use ONLY

speciﬁc and approved types of devices for such applications.

• The Monitored Light Curtain MUST be installed ONLY by authorized

and fully trained personnel.

IMPORTANT INFORMATION ABOUT THE MONITORED LIGHT CURTAIN

LiftMaster® Monitored Light Curtain (Model LC36M, Model LC36M41) is an entrapment protection device used with sectional and rolling doors that

is designed with 8 optical sensors that form 22 total invisible light beams. These light beams create a cross-pattern or netting effect for maximum

protection against entrapment. When properly connected and aligned, the Monitored Light Curtain will detect an obstruction in the path of the light

beams. If an obstruction breaks any light beam while the door is closing, the operator will stop and reverse to the full open position. The invisible light

beam must be unobstructed. No part of the door (or door tracks, springs, hinges, rollers or other hardware) may interrupt the light beam while the door

is closing.

When the Monitored Light Curtain is installed as the primary entrapment protection device, the lowest optical sensor will need to be installed 6" (15 cm)

maximum above and a minimum of 3" (7.62 cm) from the ﬂoor. If the Monitored Light Curtain is the secondary monitored entrapment protection device

it must be installed 12" (30.5cm) above the primary monitored entrapment protection device. The Monitored Light Curtain Transmitter must be installed

facing the Light Curtain Receiver across the entrapment zone.

NOTE: In this application, in order for the lowest optical sensor to be no higher than 6" above the ﬂoor, the wiring of the Monitored Light Curtain must

be facing in the upward direction. If installed with the wires facing down, the lowest optical sensor will be much higher than 6" above the ground; it will

be approx. 9-10" above the ground.

INTRODUCTION

NOTE: (Images not to scale)

CARTON INVENTORY

SPECIFICATIONS

Optical

Operating range: 3 - 33 feet (.91 - 10 meters) ............................................

Coverage area: 36" (91.4 cm) detection zone .............................................

Number of optical sensors: 8 ......................................................................

Number of invisible light beams: 22 ............................................................

Receiver LED: Green ...................................................................................

Transmitter LED: Amber .............................................................................

Electrical

Current Draw 40 mA ...................................................................................

Supply voltage: 18 to 30 volts AC or DC .....................................................

Output Type: Open Collector, Pulsed ..........................................................

Mechanical

Housing material: Aluminum, anodized ......................................................

Cable length LC36M: 6'6" (2m) ...................................................................

Cable length LC36M41: 41' (12.5m) ...........................................................

Enclosure rating: IP 67 ...............................................................................

Operating temperature range: - 40°F to +140°F (- 40°C to +60°C) .............

Storage temperature range: - 40°F to +185°F (- 40°C to +85°C) ...............

Dimensions

Light Curtain Receiver

Mounting Brackets (4)

Blocking Material

Light Curtain Transmitter

Red cable end

Green LED

Black cable end

Amber LED

Optical Sensors (8)

2' 9.5"

(86.1 cm)

.2" (5 mm)

.27" (7 mm)

LED

3' 8.25"

(112 cm)

1' 6.23"

(46.3 cm)

.47" (12 mm)

44" (111.8 cm) length with 36" (91.4 cm) detection zone

10" (25.4 cm) Extended Mounting Brackets with Reinforced Ribs for doors with a 2" (5.08 cm) edge

10" (25.4 cm)

2" (5.08 cm)1" (2.54 cm)

APPLICATION

The Monitored Light Curtain is UL Approved and compatible with

LiftMaster LOGIC 5.0 Heavy and Standard-Duty, Medium-Duty,

DDO8900W, LJ8900W, LJ8950W, ATSW, VFOH, HPH1, HPH2, HCTDCUL,

Fire Door Operators (FDC, FDCL, FDO-A, FDO-B), and Egress (LGE)

Commercial Door Operators. The Monitored Light Curtain is for indoor

use only but may be installed in areas exposed to rain or moisture.

INTRODUCTION

The images in this document are for reference only and your product may look different.

ACCESSORIES

Conduit Kit ...............................................................................OES-COND

Conduit kit with 2 junction boxes and 2 ﬂexible cables.

Plug-In Power Supply ...............................................................100MAPS

For Medium Duty Logic, DDO8900W, LJ8900W, LJ8950W, ATSW

LiftMaster commercial door operators that have little or no accessory power

available. Also for use with LOGIC 5.0 operators to provide additional power

for the Light Curtains when multiple Accessories are used. 100MAPS is

always required when 2 sets of light curtains are employed. Up to 2 sets of

Light Curtains may be powered by a single 100MAPS.

Plug-In Optional Card .............................................................CPS3CARD

Required to wire 2nd Monitored Entrapment Protection Device to LOGIC

5.0 Operators.

Not Shown

• Screws, Washers, and Nuts with Nylon Insert

• Wire Connectors (6)

• Installation Manual

• Model LC36M - Wire length 6'6"

• Model LC36M41 - Wire length 41'

Specyfikacje produktu

Marka:	LiftMaster
Kategoria:	Niesklasyfikowane
Model:	LC36M41

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z LiftMaster LC36M41, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane LiftMaster

LiftMaster CAPXLV2MC Instrukcja

7 Października 2024

LiftMaster CAPXSHOOD Instrukcja

29 Września 2024

LiftMaster 041DJ003MC Instrukcja

25 Września 2024

LiftMaster myQ-SGC2WCH Instrukcja

23 Września 2024

LiftMaster CAPXS Instrukcja

23 Września 2024

LiftMaster 041D8006-1 Instrukcja

22 Września 2024

LiftMaster IHSL24UL Instrukcja

22 Września 2024

LiftMaster LJ8900W Instrukcja

22 Września 2024

LiftMaster 041A7767 Instrukcja

22 Września 2024

LiftMaster 41K4629 Instrukcja

22 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024