Instrukcja obsługi LiftMaster CAPXL

LiftMaster Niesklasyfikowane CAPXL

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LiftMaster CAPXL (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

LiftMaster Smart Access Systems

Installation Readiness Survey

Name:

Address:

City/State/ZIP:

Mobile/Cell#:

Email:

Satisfactory

Needs Action

Required Connectivity

I. INTERNET SPECIFICATIONS

Component: Result

(Circle) Veriﬁed √: Action Needed Date

Completed

1. I have a dedicated line for each device at

this facility. Yes / No If , call your Internet Service No

Provider (ISP) to add one.

2. The Internet Service Provider (ISP) is:

3. Router’s make/model/manufacture date:

4. Modem/gateway’s make/model/

manufacture date:

5. The dedicated bandwidth is at least 5 Mbps

for each Smart Video Intercom unit (except

CAPAC and CAP2D). (TIP: Use a known

internet speed tester for measuring.)

Yes / No Upload => 5 Mbps

Download => 5 Mbps

If , check for other network devic-No

es sharing bandwith. Call your ISP to

match need.

6. Other equipment on site (example: cameras,

WI-FI repeater, radio tower): Yes / No If , list them in the Yes

On-site Equipment List section.

Assess current internet connection details of the community site prior to new unit or upgrade of an installation, and identify action items needed to proceed. Perform this

assessment separately for each connected access device. IMPORTANT: Fill out the form COMPLETELY. Incomplete or missing information identiﬁes action items to be

completed before installation can begin.

Before you begin...

Gather necessary IT information and staff to assess site readiness. Survey completion can serve as a quick reference site inventory.

RECOMMENDED TOOLS

• Computer running Microsoft Windows (unlock with Ethernet port)

• Internet Speed Tester

• LAN/WAN Network Checker

• Wi-Fi analyzer

• Ethernet Cable (5-10’)

• Ethernet Cable RJ45 Coupler (Female-Female)

• WilsonPro 460118 RF Cellular Signal Meter

• Speedcheck App (app store)

• Netanalyzer (app store)

SURVEY PERFORMED BY:

SITE CONTACT

First Name:

Last Name:

Job Title:

Email:

Mobile/Cell#:

SITE INFORMATION

Site/Facility Name: Survey Date:

myQ Community Account: Proposed Install Date:

Street Address:

City/State/Zip:

Site Information

TECH SUPPORT CONTACT

First Name:

Last Name:

Job Title:

Email:

Mobile/Cell#:

Satisfactory

2. CONNECTION METHOD (CHOOSE ONE)

Component: Result

(Circle) Veriﬁed √: Action Needed Date

Completed

OPTION 1: WIRED (Select one type):

DSL

Cable

Fiber ISP

—

OPTION 2: WIRELESS (Wi-Fi™ )

Wi-Fi network name:

Wi-Fi password:

The dBm Signal Strength is between -30 dBm

and -67 dBm. (TIP: USE a Wi-Fi Analyzer tool to

measure this. See Fig. 2.)

Yes / No If , you need to adjust the distance No

from the router to the control.

3. SIP PROVIDER

Component: Result

(Circle) Veriﬁed √: Action Needed Date

Completed

A SIP account is required for calling function.

LiftMaster only supports Phone.com for video

calling features and cannot guarantee or

support 3rd party SIP provider’s compatibility for

voice only calling.

Yes / No

If , see step 6 and establish Phone.No

com service in the app’s Device

Management tab.

4. INTERNET PROTOCOL

Component: Veriﬁed √: Action Needed Date

Completed

Internet Protocol (Select one type):

Dynamic Host Conﬁguration Protocol (DHCP). Any device can connect.

Static IP (Assigned to be recognized with speciﬁc parameters listed below.)

If , provide the additional Static IP

speciﬁcations below.

FOR STATIC IP

IP Address:

Netmask:

Gateway Address:

Primary Domain Name Service (DNS):

Secondary DNS:

Tertiary DNS :

6. ACCOUNT SETUP myQ COMMUNITY

Action: Veriﬁed √: Action Needed Date

Completed

1a. For existing accounts, create a myQ Community.

1b. Call LiftMaster Tech Support - Access Control at 877-247-6764 to

set up a myQ Community account.

2. Respond within 24 hours to the email invitation to register.

3. Proceed within your account to complete:

FACILITY (your site proﬁle - ALL REQUIRED FIELDS)

PEOPLE (including residents and credentials)

5. PHYSICAL CABLING SPECIFICATIONS

Component: Result

(Circle) Veriﬁed √: Action Needed Date

Completed

Existing cabling is CAT 6 or greater for new

installations. (CAT 5e is adequate for existing

installations.)

Yes / No

If , recabling using CAT 6 or No

greater is required. Consult with your

service provider to replace the cable.

The cabling from router to connected access

installation point is less than 300' cabling

length.

Yes / No

If , you need to adjust and shorten No

the distance between the internet

router and the unit.

Patch Cable follows conﬁguration (for router

or switch) in Fig. 1 on the next page. Yes / No

The outlet for the CAPX-system MUST be an external dedicated 120 Vac outlet. Refer

to the table below for maximum wire run distances. This outlet should be wired back to

its own 10 Amp minimum circuit breaker.

NOTE: Main power supply and control wiring MUST be run in separate

conduits. Conduits must be UL approved for low and high voltage. Refer to the

NEC for additional wiring requirements.

IMPORTANT: An earth ground rod is strongly recommended and should be no further than 12 feet (3.7 m) from the CAPX-system and use a

minimum of 12 gauge wire in most cases. The type and length of earth ground rods vary by region. Contact the AHJ (Authority Having Jurisdiction) in

the municipality where you plan to install the CAPX-system for correct grounding materials and installation procedures. A proper ground is critical to

minimizing risk for the CAPX-system from damaging electrical transients.

WIRE SPECIFICATION MAXIMUM RUN DISTANCE

14 AWG Up to 300 feet (91.4 m)

16 AWG Up to 200 feet (60.9 m)

18 AWG Up to 100 feet (30.4 m)