Instrukcja obsługi LiftMaster CAP2D

LiftMaster Niesklasyfikowane CAP2D

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LiftMaster CAP2D (57 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/57
myQ® BusinessTM
Connected Access Portal 2-Door Controller
INSTALLATION MANUAL
Model CAP2D
2
PRE-INSTALL NETWORKWIRING ACCESS CONTROLINTRODUCTION INSTALL
INTRODUCTION
Safety ............................................................................ 3
Controller Overview ....................................................... 4
Control Board Overview ................................................ 4
Carton Inventory ........................................................... 5
Tools Needed ................................................................ 5
Dimensions ................................................................... 5
Specifi cations ................................................................ 6
Electrical Ratings........................................................... 6
Wire Specifi cations ....................................................... 7
PRE-INSTALL
Internet Service ............................................................. 8
CP# for Controller ......................................................... 8
Setup a myQ® Business™ Account ............................... 8
Mount the Bracket ......................................................... 9
WIRING
Connect Power ............................................................ 10
NETWORK
Connect Internet .......................................................... 11
ACCESS CONTROL
Admin Mode ................................................................ 12
Wiring REX and Doors ................................................ 12
Operation .................................................................... 14
Gate Access................................................................. 15
Door Access ................................................................ 16
Confi guration Sheet .................................................... 18
Legal Disclaimers ...................................................... 19
Warranty ..................................................................... 19
1
2
3
4
INSTALL
5
Install the CAP2D ........................................................ 17
Troubleshooting .......................................................... 18
For myQ® Business™ programming, please visit www.myqbusiness.com
3
To reduce the risk of SEVERE INJURY or DEATH:
• Disconnect power at the fuse box BEFORE proceeding.
• To AVOID damaging gas, power or other underground utility
lines, contact underground utility locating companies BEFORE
digging.
• ALL electrical connections MUST be made by a qualified
individual.
• ALL power and control wiring MUST be run in separate
conduit.
To protect against fire and electrocution:
• Disconnect power BEFORE installing or servicing controller.
• NEVER connect a keypad/reader or lock to doors without first
consulting the applicable fire code.
• You MUST consult with, and get approval from, local fire
officials BEFORE installing locks or devices on ANY doors that
may be fire exits.
• Use of egress push buttons may not be legal. Single action
exits may be required.
• ALWAYS obtain proper permits and approvals in writing
BEFORE installing equipment.
Safety
Safety Symbol and Signal Word Review
When you see these Safety Symbols and Signal Words on
the following pages, they will alert you to the possibility of
serious injury or death if you do not comply with the warnings
that accompany them. The hazard may come from something
mechanical or from electric shock. Read the warnings carefully.
When you see this Signal Word on the following pages, it will alert
you to the possibility of damage to your property or product if you
do not comply with the cautionary statements that accompany it.
Read them carefully.
MECHANICAL
ELECTRICAL
PRE-INSTALL NETWORKWIRING ACCESS CONTROLINTRODUCTION INSTALL
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer
or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
UNDERWRITERS LABORATORIES (UL) COMPLIANCE
The CAP2D complies with the UL294 Standard for access control
units with the following restrictions:
• The system relay contacts shall not be confi gured in the fail
secure mode unless permitted by the local authority having
jurisdiction and shall not interfere with the operation of panic
hardware.
• The Ethernet port is for supplemental use only, the unit will
continue to operate standalone if the network connection is interrupted.
• This unit can be powered over Ethernet via PoE Compatible hardware. Where used, any PoE power source must be UL294 Listed.
• All interconnecting devices must be UL Listed.
DO NOT INSTALL THE SYSTEM IN THE FAIL SECURE MODE
UNLESS PERMITTED BY THE LOCAL AUTHORITY HAVING
JURISDICTION. Doing so may cause interference with the
operation of panic hardware.

Specyfikacje produktu

Marka: LiftMaster
Kategoria: Niesklasyfikowane
Model: CAP2D

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z LiftMaster CAP2D, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane LiftMaster

LiftMaster

LiftMaster CAPXLV2MC Instrukcja

7 Października 2024
LiftMaster

LiftMaster CAPXSHOOD Instrukcja

29 Września 2024
LiftMaster

LiftMaster 041DJ003MC Instrukcja

25 Września 2024
LiftMaster

LiftMaster myQ-SGC2WCH Instrukcja

23 Września 2024
LiftMaster

LiftMaster CAPXS Instrukcja

23 Września 2024
LiftMaster

LiftMaster 041D8006-1 Instrukcja

22 Września 2024
LiftMaster

LiftMaster IHSL24UL Instrukcja

22 Września 2024
LiftMaster

LiftMaster LJ8900W Instrukcja

22 Września 2024
LiftMaster

LiftMaster 041A7767 Instrukcja

22 Września 2024
LiftMaster

LiftMaster 41K4629 Instrukcja

22 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024