Instrukcja obsługi LG S4NW18KL2MC

LG klimatyzacja S4NW18KL2MC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LG S4NW18KL2MC (71 stron) w kategorii klimatyzacja. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/71
www.lg.com
OWNER’S MANUAL
AIR CONDITIONER
Copyright © 2021 LG Electronics Inc. All Rights Reserved
TYPE: WALL MOUNTED
MFL69781703
Rev.00_111721
Read this owner's manual thoroughly before operating the
appliance and keep it handy for reference at all times.
EN ENGLISH AR
ةيبرعلا
TABLE OF CONTENTS This manual may contain images or
content different from the model you
purchased.
This manual is subject to revision by the
manufacturer.
SAFETY INSTRUCTIONS ................................................... 3
IMPORTANT SAFETY INSTRUCTIONS 3 ................................................
OPERATION ....................................................................... 11
Notes for Operation .............................................................................. 11
Parts and Functions .............................................................................. 11
Wireless Remote Control 12 ......................................................................
Restarting the Air Conditioner Automatically ........................................17
Using the Mode Function 17 ......................................................................
Using the Jet Mode Function 19 ................................................................
Using the Fan Speed Function 20 .............................................................
Using the Air Flow Direction Function 20 ...................................................
Setting the On/Off Timer 21 .......................................................................
Using the Sleep Function (Optional) 22 .....................................................
Using the Simple Timer Function (Optional) 22 .........................................
Using the Energy Display Function (Optional) 23 ......................................
Using the Light Off Function (Optional) 23 ................................................
Using the Comfort Air Function (Optional) 23 ............................................
Using the Energy Saving Function (Optional) 24 ......................................
Using the Energy Control Function (Optional) 24 ......................................
Using UVnano Function (Optional) 25 .......................................................
Using Special Functions 26 .......................................................................
SMART FUNCTIONS ......................................................... 29
LG ThinQ Application ............................................................................29
Smart Diagnosis 31 ...................................................................................
MAINTENANCE .................................................................. 32
Clean the Air Filter 34 ................................................................................
Clean the Micro Dust, Triple and Allergy Filter (Optional) 35 .....................
TROUBLESHOOTING ....................................................... 36
3
SAFETY INSTRUCTIONS
EN
The following safety guidelines are intended to prevent
unforeseen risks or damage from unsafe or incorrect
operation of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION
as described below.
This symbol is displayed to indicate matters and
operations that can cause risk. Read the part with this
symbol carefully and follow the instructions in order to
avoid risk.
WARNING
This indicates that the failure to follow the instructions can
cause serious injury or death.
CAUTION
This indicates that the failure to follow the instructions can
cause the minor injury or damage to the product.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of explosion, fire, death, electric shock,
injury or scalding to persons when using this product,
follow basic precautions, including the following:
Children in the Household
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance.
4
EN
Installation
Do not install the air conditioner on an unstable surface or in a
place where there is danger of it falling.
Contact an authorized service center when installing or relocating
the air conditioner.
Install the panel and the cover of the control box safely.
Do not install the air conditioner in a place where flammable
liquids or gases such as gasoline, propane, paint thinner, etc., are
stored.
Make sure that the pipe and the power cable connecting the
indoor and outdoor units are not pulled too tight when installing
the air conditioner.
Use standard circuit breaker and fuse that conform to the rating of
the air conditioner.
Do not input air or gas into the system except with the specific
refrigerant.
Use non-flammable gas (nitrogen) to check for leak and to purge
air; using compressed air or flammable gas may cause fire or
explosion.
The indoor/outdoor wiring connections must be secured tightly,
and the cable should be routed properly so that there is no force
pulling the cable from the connection terminals. Improper or loose
connections can cause heat generation or fire.
Install dedicated electric outlet and circuit breaker before using the
air conditioner.
Do not connect the ground wire to a gas pipe, a lightning rod, or a
telephone ground wire.
Means for disconnection must be incorporated in the fixed wiring
in accordance with the wiring rules.
Do not install the unit in potentially explosive atmospheres.
5
EN
Operation
Be sure to use only those parts listed in the service parts list.
Never attempt to modify the equipment.
Make sure that children do not climb on or hit the outdoor unit.
Dispose of the batteries in a place where there is no danger of
fire.
Use only the refrigerant specified on the air conditioner label.
Cut off the power supply if there is any noise, smell, or smoke
coming from the air conditioner.
Do not leave flammable substances such as gasoline, benzene, or
thinner near the air conditioner.
Contact an authorized service center when the air conditioner is
submerged by flood waters.
Do not use the air conditioner for an extended period of time in a
small place without proper ventilation.
In the event of a gas leak (such as Freon, propane gas, LP gas,
etc.) ventilate sufficiently before using the air conditioner again.
Be sure to ventilate sufficiently when the air conditioner and a
heating appliance such as a heater are used simultaneously.
Do not block the inlet or outlet of air flow.
Do not insert hands or other objects through the air inlet or outlet
while the air conditioner is operating.
Make sure that the power cable is neither dirty, loose, nor broken.
Never touch, operate, or repair the air conditioner with wet hands.
Do not place any objects on the power cable.
Do not place a heater or other heating appliances near the power
cable.
7
EN
This appliance must be properly grounded to minimize risk of
electric shock.
Do not cut or remove the grounding prong from the power plug.
Attaching the earth wire to the power outlet cover screw does not
ground the appliance unless the cover screw is metal, uninsulated,
and the power outlet is grounded through house wiring.
If you have any doubt whether the air conditioner is properly
grounded, have the power outlet and circuit checked by a qualified
electrician.
The refrigerant and insulation blowing gas used in the appliance
require special disposal procedures. Consult a service agent or a
similarly qualified person before disposing of them.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person in
order to avoid a hazard.
Unintended use of the appliance or damage to the housing may
result in the escape of dangerous UV-C radiation. UV-C radiation
may, even in little doses, cause harm to the eyes and skin.
This appliance contains a UV-C lamp.
When the appliances are damaged or need to replaced,
disconnect the power supply and contact the service center.
Do not operate UV-C lamp outside of the appliance.
Do not clean and touch air deflector during operation.
Before opening doors and access panels bearing the ultraviolet
radiation hazard symbol for the conducting user maintenance, it is
recommended to disconnect the power.
Read the maintenance instructions before opening the appliance.
Appliances that are obviously damaged must not be operated.
The appliance must be disconnected from the supply before
replacing the UV-C lamp.
8
EN
CAUTION
To reduce the risk of minor injury to persons, malfunction,
or damage to the product or property when using this
product, follow basic precautions, including the following:
Installation
Do not install the air conditioner in an area where it is directly
exposed to sea wind (salt spray).
Install the drain hose properly for the smooth drainage of water
condensation.
Exercise caution when unpacking or installing the air conditioner.
Do not touch the leaking refrigerant during installation or repair.
Transport the air conditioner with two or more people or use a
forklift.
Install the outdoor unit such that it is protected from direct
sunlight. Do not place the indoor unit in a place where it is directly
exposed to sunlight via the windows.
Safely dispose of packing materials such as screws, nails, plastic
bag or batteries using proper packaging after installation or repair.
Install the air conditioner in a place where the noise from the
outdoor unit or the exhaust fumes will not inconvenience the
neighbors. Failure to do so may result in conflict with the
neighbors.
9
EN
Operation
Remove the batteries if the remote control is not to be used for an
extended period of time.
Make sure that the filter is installed before operating the air
conditioner.
Be sure to check if there is a refrigerant leak after installing or
repairing the air conditioner.
Do not place any object on the air conditioner.
Never mix different types of batteries, or old and new batteries for
the remote control.
Do not let the air conditioner run for a long time when humidity is
very high or when a door or a window has been left open.
Stop using the remote control if there is a fluid leak in the battery.
If your clothes or skin are exposed to the leaking battery fluid,
wash off with clean water.
Do not expose people, animals, or plants to the cold or hot wind
from the air conditioner for extended periods of time.
If the leaking battery fluid has been swallowed, rinse the inside of
the mouth thoroughly and consult a doctor.
Do not drink the water drained from the air conditioner.
Do not use the product for special purposes, such as preserving
foods, works of art, and etc. It is an air conditioner for consumer
purposes, not a precision refrigeration system. There is risk of
damage or loss of property.
Do not recharge or disassemble the batteries.
10
EN
Maintenance
Never touch the metal parts of the air conditioner when removing
the air filter.
Use a sturdy stool or ladder when cleaning, maintaining, or
repairing the air conditioner at a height.
Never use strong cleaning agents or solvents when cleaning the
air conditioner or spray water. Use a smooth cloth.
To clean the interior, contact an authorized service center or
dealer. Using harsh detergents may cause corrosion or damage to
the unit.
11
OPERATION
EN
Notes for Operation
Suggestion for Energy Saving
Do not over-cool the space. This may be harmful for your health and may consume more
electricity.
Block sunlight with blinds or curtains while you are operating the air conditioner.
Keep doors or windows closed tightly while you are operating the air conditioner.
Adjust the direction of the air flow vertically or horizontally to circulate indoor air.
Speed up the fan to cool or warm indoor air quickly, within a short period of time.
Open windows regularly for ventilation. The indoor air quality may deteriorate if the air conditioner
is used for long durations.
Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may block the
air flow or reduce the unit performance.
Parts and Functions
Indoor Unit Outdoor Unit
Air Filter
Air Intake
Front Cover
Air Outlet
Air Deflector (Horizontal Vane)
Air Deflector (Vertical Louver)
On/Off Button
1
2
3
4
5
6
7
Air Intake Vents
Air Outlet Vents
1
2
NOTE
The number and location of operation lamps may vary according to the model of the air
conditioner.
The feature may be changed according to the type of model.
19
EN
Heating Mode
1Turn the appliance on.
2Press Mode button repeatedly to select the
Heating Mode.
is displayed on the display screen.
3Press or button to set the desired
temperature.
NOTE
will be displayed on the indoor unit when
defrosting is operating.
Furthermore, this indication will be displayed
on the indoor unit:
When preheating is operating.
When the room temperature has been
reached to the set temperature.
Fan Mode
This mode only circulates the indoor air without
changing the room temperature.
1Turn the appliance on.
2Press Mode button repeatedly to select the
Fan Mode.
is displayed on the display screen.
3Press Fan Speed button to adjust the fan
speed.
NOTE
or will be displayed on the indoor unit
when fan mode is operating.
Using the Jet Mode Function
Changing Room Temperature
Quickly
This function allows you to cool indoor air
quickly during the summer or warm it quickly
during winter.
Cooling & Heating model : The Jet Mode
function is available with Cooling, Heating and
Dehumidification Mode.
Cooling Only model : The Jet Mode function is
available with Cooling, Dehumidification, Fan,
Auto Operation Mode and Air Purification
function.
1Turn the appliance on.
2Press Mode button repeatedly to select the
desired mode.
3Press Jet Mode button.
is displayed on the display screen.
NOTE
Jet Heating Mode is not available on some
models.
In Jet Cooling Mode, strong air blows out for
30 minutes.
After 30 minutes later, setting temperature is
maintaining 18 °C
If you want to change the temperature, Press
or button to set the desired
temperature.
In Jet Heating Mode, strong air blows out for
30 minutes.
After 30 minutes later, setting temperature is
maintaining 30 °C
If you want to change the temperature, Press
or button to set the desired
temperature.
This function may operate differently from the
remote control display.
21
EN
Setting the On/Off Timer
This function sets the air conditioner to turn on/
off automatically at desired time.
On/Off Timer can be set together.
Setting the On Timer
1Press button repeatedly.
The icon below blinks at the bottom of the
display screen.
2Press or button to select the
minutes.
3Press Set/Cancel button to finish.
After setting the timer, current time and
icon are displayed on the display
screen indicating that the desired time is
set.
Canceling the On Timer
1Press button repeatedly.
The icon below blinks at the bottom of the
display screen.
2Press Set/Cancel button to cancel the
setting.
Setting the Off Timer
1Press button repeatedly.
The icon below blinks at the bottom of the
display screen.
2Press or button to select the
minutes.
3Press Set/Cancel button to finish.
After setting the timer, current time and
icon are displayed on the display
screen indicating that the desired time is
set.
NOTE
This function is disabled when you set Simple
Timer.
Canceling the Off Timer
1Press button repeatedly.
The icon below blinks at the bottom of the
display screen.
2Press Set/Cancel button to cancel the
setting.
Canceling the Timer Setting
Press button to cancel all timer settings.
25
EN
Using UVnano Function
(Optional)
UVnano is a compound word of UV (ultraviolet
rays) and nanometer (length unit).
This function reduces various bacteria inside
the air conditioner.
Model name: LTPL-G35UV275GS-JA
LTPL-G35U275GS-TWA
CUD7GF1A
Press Jet Mode button and hold it about 3
seconds.
NOTE
UV is displayed on some indoor units,
depending on the model.
The UV LED operates at regular intervals to
keep the fan clean.
The UVnano function stops when the air
conditioner is turned off.
When Auto Clean Function starts, UVnano
Function works together to keep the fan clean.
This function is disabled with Heating Mode.
26
EN
Using Special Functions
1Turn the appliance on.
2Press Func button repeatedly to select the
desired function.
3Press Set/Cancel button to finish.
Display
Screen Description
The Ion generator uses millions
of ions to help improve indoor
air quality.
To reduce noise from outdoor
units.
To keep your skin moisturized
by generating ion clusters.
To lower indoor humidity
quickly.
To maintain a minimum room
temperature and prevent
objects in the room from
freezing.
To scare away a mosquito.
To remove moisture generated
inside the indoor unit.
To make a comfortable sleeping
environment.
NOTE
Some functions may not be supported,
depending on the model.
Some functions may operate differently from
the remote control display.


Specyfikacje produktu

Marka: LG
Kategoria: klimatyzacja
Model: S4NW18KL2MC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z LG S4NW18KL2MC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje klimatyzacja LG

LG

LG LMU360HHV Instrukcja

21 Lutego 2025
LG

LG LMU540HV Instrukcja

21 Lutego 2025
LG

LG C242CC Instrukcja

4 Stycznia 2025
LG

LG C182CC Instrukcja

4 Stycznia 2025
LG

LG C122CC Instrukcja

4 Stycznia 2025
LG

LG C182CM Instrukcja

4 Stycznia 2025
LG

LG A122CB Instrukcja

4 Stycznia 2025
LG

LG C142CM Instrukcja

4 Stycznia 2025
LG

LG LW1011CR Instrukcja

22 Grudnia 2024
LG

LG LP0818WNR Instrukcja

22 Grudnia 2024

Instrukcje klimatyzacja

Najnowsze instrukcje dla klimatyzacja