Instrukcja obsługi LG 50UQ9050PSC

LG Telewizja 50UQ9050PSC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LG 50UQ9050PSC (20 stron) w kategorii Telewizja. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/20

ENGLISH_index

Safety and Reference

OWNER’S MANUAL www.lg.com

LED TV*

Please read this manual carefully

before operating your set and retain it

for future reference.

* LG LED TV applies LCD screen with LED backlights.

The model and serial number of the product are

located on the back and on one side of the product.

Record them below in case you ever need service.

Model

Serial No.

*MFL718464422203REV01*

55QNED80SQA

55QNED85SQA

65QNED80SQA

65QNED85SQA

65QNED90SQA

75QNED80SQA

75QNED85SQA

75QNED90SQA

75QNED99SQA

86QNED80SQA

86QNED85SQA

86QNED90SQA

86QNED99SQA

43NANO75SQA

50NANO75SQA

50NANO80SQA

55NANO75SQA

55NANO80SQA

65NANO75SQA

65NANO80SQA

70NANO75SQA

75NANO75SQA

75NANO80SQA

86NANO75SQA

43UQ7400PSF

43UQ7500PSF

43UQ8000PSB

43UQ8000PSK

43UQ8050PSB

43UQ8050PSK

43UQ9050PSC

50UQ7400PSF

50UQ7500PSF

50UQ8000PSB

50UQ8000PSK

50UQ8050PSB

50UQ8050PSK

50UQ9050PSC

55UQ7400PSF

55UQ7500PSF

55UQ8000PSB

55UQ8000PSK

55UQ8050PSB

55UQ8050PSK

55UQ9050PSC

60UQ8000PSB

60UQ8000PSK

60UQ8050PSB

60UQ8050PSK

60UQ9000PSA

65UQ7400PSF

65UQ7500PSF

65UQ8000PSB

65UQ8000PSK

65UQ8050PSB

65UQ8050PSK

65UQ9050PSC

70UQ8050PSB

70UQ8050PSK

75UQ8050PSB

75UQ8050PSK

75UQ9050PSC

86UQ9050PSC

Starting TV

Turning on the TV

You can simply operate the TV functions, using the button.

Power On (Press)

Power Off1) (Press and Hold)

Menu Control (Press

2))

Menu Selection (Press and Hold3))

1) All running apps will close, and any recording in progress will stop.

(Depending upon country)

2) You can access and adjust the menu by pressing the button when TV is on.

3) You can use the function when you access menu control.

Note

•When the TV is turned on for the first time after being shipped from the

factory, initialization of the TV may take approximately one minute.

•Your TV’s OSD (On Screen Display) may differ slightly from that shown

in this manual.

•The device must be easily accessed to a location outlet near the access.

Some devices are not made by turning on / off button, turning off the

device and unplugging the power cord.

Connections

You can connect various external devices to the TV. For more information on

external device’s connection, refer to the manual provided with each device.

HDMI

•When connecting the HDMI cable, the product and external devices

should be turned off and unplugged.

•Supported HDMI Audio format (Depending upon model):

True HD (48 kHz),

Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz),

PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)

Note

•If the device connected to Input Port also supports HDMI Deep Color,

your picture may be clearer. However, if the device doesn’t support it, it

may not work properly. In that case, change the TV’s [HDMI Deep Color]

setting to off.

• [General] [Devices] [HDMI Settings] [HDMI → → → → →

Deep Color]

•Use a certified cable with the HDMI logo attached. If you do not use a

certified HDMI cable, the screen may not display or a connection error

may occur.

•Recommended HDMI cable types (3 m or less)

-Ultra High Speed HDMI®/™ cable

USB

Some USB Hubs may not work. If a USB device connected through a USB Hub

is not detected, connect it directly to the USB port on the TV. (Depending

upon model)

Note

•For an optimal connection, HDMI cables and USB devices should have

bezels less than 10mm thick, 18mm width and 8mm a wire diameter.

(Depending upon model)

•Use an extension cable that supports if the USB cable or USB

flash drive does not fit into your TV’s USB port.

IR Blaster

Control the set-top box (cable/satellite/IP/OTT), Blu-ray/DVD player,

soundbar, game consoles, etc., using the IR Blaster. (Depending upon country)

(Depending upon model)

Note

•Connect the IR Blaster cable to the TV’s IR Blaster port.

•Use universal control settings to control the device.

•Secure the IR Blaster with the 3M tape provided.

External Devices

Supported external devices are: Blu-ray player, HD receivers, DVD players,

VCRs, audio systems, USB storage devices, PC, gaming devices, and other

external devices.

Note

•The external device connections shown may differ slightly from

illustrations in a manual

•In PC mode, there may be noise associated with the resolution, vertical

pattern, contrast or brightness. If noise is present, change the PC output

to another resolution, change the refresh rate to another rate or adjust

the brightness and contrast on the [Picture] menu until the picture is

clear. Depending upon the graphics card, some resolution settings may

not allow the image to be positioned on the screen properly.

•When connecting to a wired LAN, use a CAT 7 cable with high-speed

Internet transmission.

Licenses

(Magic Remote supported models only)

Troubleshooting

Cannot control the TV with

the remote control.

•Check if anything such as tape has been placed over the receiver.

•Check if there is any obstacle between the product and the remote control.

•Replace the batteries with new fresh ones.

No image display and no

sound is produced.

•Check if the product is turned on.

•Check if the power cord is connected to a wall outlet.

•Check if there is a problem in the wall outlet by connecting other products.

The TV turns off suddenly. •Check the power control settings. The power supply may be interrupted.

•Check if the auto-off function is activated in the settings menu.

•If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity.

Abnormal Display •If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing

wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots.

However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your

finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

•This panel is an advanced product that contains millions of pixels. In a very few cases, you could see fine dots on

the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and

reliability of the TV.

•Displaying a still image for a prolonged period of time may cause an image sticking. Avoid displaying a fixed image

on the TV screen for a extended length of time.

Generated Sound •Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal

contraction due to temperature and humidity. This noise is common for products where thermal deformation is

required.

•Electrical circuit humming/panel buzzing A low level noise is generated from a high-speed switching

circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This

generated sound does not affect the performance and reliability of the product.

•When cleaning the product, be careful not to allow any liquid or foreign objects to enter the gap between the upper, left or right side of the panel and the

guide panel, (Depending upon model).

•Make sure to wring any excess water or cleaner from the cloth.

•Do not spray water or cleaner directly onto the TV screen.

•Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.