Instrukcja obsługi Levenhuk DTX 500 LCD
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Levenhuk DTX 500 LCD (41 stron) w kategorii mikroskop. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/41
Levenhuk DTX 500 LCD
Digital Microscope
User Manual
Návod k použití
Bedienungsanleitung
Guía del usuario
Instrukcja obsługi
Инструкция по эксплуатации
RU
PL
ES
DE
СZ
EN
5
PIXELS
500x
3.5''
Levenhuk DTX 500 LCD
Digital Microscope
EN
Never, under any circumstances, look directly at the Sun,
another bright source of light or at a laser through this device,
as this may cause PERMANENT RETINAL DAMAGE
and may lead to BLINDNESS.
Microscope parts
The kit includes: microscope, rechargeable battery, power cable, USB cable, RCA cable,
Levenhuk DTX installation CD user guide calibration scale, cleaning cloth, , .
2
LCD display
MicroSD card slot
Fine focus knob
Microscope optical tube
Stage
Coarse focus knob
Focus lock knob
Shutter button
Brightness adjustment wheel
Magnification adjustment wheel
Power cable socket
RCA socket
USB socket
Battery compartment
Battery status indicator
Function keys
Microscope assembly
Open the battery compartment at the bottom of the microscope base. Insert the battery into the
battery compartment matching the indicated polarity. The battery has to be fully charged before
turning the microscope on for the first time. Plug the power cable into the power cable socket
on the microscope body (11) and connect it to a power source. The battery status indicator (15)
will turn red. Once the battery is fully charged, the indicator will go out. You can now disconnect
the microscope from the power source and turn it on. The fully-charged battery allows you to
use the microscope for two hours. The illumination will grow dim and the image quality will
decrease to inform you that the battery is low. Charge the battery, as described above.
A microSD card (purchased separately) is required to save captured images and recorded videos.
Turn the microscope off and insert the microSD card into the corresponding slot on the
microscope body until it locks in place with a click. Do not apply excessive force when inserting
the microSD card. Try rotating the card, if it does not lock in place with ease. Format the card
before using it.
To turn the microscope on press the power button (16). To turn the microscope off press
the power button (16) again (refer to Power saving for more information).
00013/01618
5.0М
Image capture mode icon
Sequence capture mode icon
Captured image counter Total number /
of images that may be captured
(based on the current resolution)
MicroSD status icon
Current image resolution
Battery status indicator
Note: interface icons may be hidden by pressing
the magnification adjustment wheel (9).
Using the microscope
Capturing an image
Turn the microscope on and place a specimen on the stage. Adjust the illumination
brightness, so that the specimen is evenly lit. Change magnification and focus your
view, if necessary, then lock the results in place with the focus lock knob (7). Press the
shutter button (8).
Recording a video
Press the key (16) to switch to video mode. The icon in the upper left corner of the ◄
screen will change in confirmation. Press the shutter button (8) to start recording and
press it again to stop.
Playing recorded videos
Press the key (16) to switch to playback mode. The icon in the upper left corner of ◄
the screen will change in confirmation. Select the desired video clip with scroll keys
(16) and press to play it.OK
Deleting files
When browsing saved files, press the Wrench Delete… key (16), select press to OK
confirm selection (you can choose to delete everything or just the selected file from the
displayed menu).
Protecting files
When browsing saved files, press the Wrench Protect key (16), select press OK
confirm selection (you can choose to protect everything or just the selected file from
the displayed menu).
Slideshow
When browsing saved files, press the Wrench Slide Show key (16), select and press
OK to confirm selection.
Interface color mode
When browsing saved files, press the key to switch between existing interface color ▲
modes.
Magnification
Scroll the magnification adjustment wheel (10) to zoom your view in or out.
Note: magnification range of Levenhuk DTX 500 LCD is 1x–4x.
Transferring files to a computer
Connect the microscope to your computer with a USB cable and, when the AutoPlay window
appears, choose to use the microscope as an external storage device.
Main menu
Press the Wrench key (16) to open the main menu. From this menu you can set image
resolution, adjust image quality and sharpness, as well as set parameters for sequence
capture.
Resolution
Select the main menu choose the required image resolution. Resolution
Press to confirm selection. OK
Note: model supports the following resolutions: VGA / 1.3M / 3M / 5M / M / 12M.8
Sequence capture
Select Timer from the main menu and set the total number of images to be captured in the
Frames dialog window. Confirm your selection by pressing . A new dialog window will OK
appear where you can set the interval between images using the and keys. Press to ▲ ▼ OK
confirm and to return to capture mode. Press the shutter button to start capturing images. ◄
The icon in the upper left corner will change in confirmation. Once the set number of images
has been captured, the screen will return to standard capture mode. Press the shutter button
at any time to stop sequence capture.
Quality
Select from the main menu and choose one of the existing settings. This will change Quality
the compression rate of captured images.
Sharpness
Select from the main menu and choose one of the existing settings.Sharpness
Language
Select from the main menu and choose one of the existing settings. Press Language OK
to confirm selection.
Power saving
Select Power Save from the main menu and set the idle time before the microscope
automatically shuts down.
Display frequency
Select from the main menu and choose one of the existing settings. Press Frequency OK
to confirm selection.
3
Specyfikacje produktu
| Marka: | Levenhuk |
| Kategoria: | mikroskop |
| Model: | DTX 500 LCD |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Levenhuk DTX 500 LCD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje mikroskop Levenhuk
1 Października 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
22 Września 2024
Instrukcje mikroskop
- mikroskop Leica
- mikroskop Toolcraft
- mikroskop Nikon
- mikroskop National Geographic
- mikroskop Maginon
- mikroskop Carson
- mikroskop Bresser
- mikroskop Swift
- mikroskop Dino-Lite
- mikroskop Celestron
- mikroskop Barska
- mikroskop Dnt
- mikroskop Traveler
- mikroskop Discovery
- mikroskop BeaverLab
- mikroskop National Optical
Najnowsze instrukcje dla mikroskop
8 Października 2024
7 Października 2024
6 Października 2024
5 Października 2024
5 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
29 Września 2024
29 Września 2024