Instrukcja obsługi Lenco IPS-260

Lenco głośnik IPS-260

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lenco IPS-260 (48 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/48
GB
GB
IPS-260
Music System for iPad / iPhone / iPod Docking
User's Guide
For information and support, www.lenco.eu
IPS260 5 lang ib.indd 2-3 2011-4-28 10:36:53
GB
GB
3
Features
Thank you for purchasing the Music System for iPad / iPhone / iPod Docking .
This model incorporates following features :
- Different iPad / iPod / iPhone models Player / Re-charger
- Audio auxiliary (AUX-IN) input for connecting other digital audio player
- Built-in 2 High Fidelity Speakers
- Heavy Bass Subwoofer
- AC-DC power adaptor operated
- Remote Control operation
-Robust Aluminum stand
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to
connect specifically to iPod or iPhone respectively and has been certified by the developer to
meet Apple performance standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards. Please note that the use of this accessory with
iPhone or iPod may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, iPod shuffle and iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries. iPad is a trademark of Apple Inc.
Installation
Remote Control
The remote control operates on one CR2025 battery (included).
To activate the remote control, remove the insulation tab attached in the battery compartment.
Warnings:
- Battery shall not be exposed to excessive heat such as sunshine, re or the like.
- Be sure that the battery are installed correctly. Wrong polarity may damage the unit.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
- Only batteries of the same or equivalent type as recommend are to be used.
- If the unit is not to be used for an extended period of time, remove the battery.
- Do not dispose of batteries in re, battery may explode or leak.
- Danger of explosion if battery is incorrectly replaced.
AC-DC Power Adaptor Connection
The unit is be powered by an external AC-DC power adaptor, required the output DC 5V 4000mA
(included).
(1) Firmly and securely plug the adaptor's AC plug into AC main outlet.
(2) Connect the adaptor's DC output plug to the DC-in jack of the unit.
iPad 2 Bracket Installation
1. Attach the lower part of the iPad 2 bracket onto
the lower part of the left dock arm.
2. Press the upper part of the iPad 2 bracket onto
the upper part of the left dock arm until it snaps
into place.
3. Attach the lower part of the iPad 2 bracket onto
the lower part of the right dock arm.
4. Press the upper part of the iPad 2 bracket onto
the upper part of the right dock arm until it
snaps into place.
2
Important Safety Instructions
When used in the directed manner, this unit has been designed and manufactured to ensure
your personal safety. However, improper use can result in potential electrical shock or fire
hazards. Please read all safety and operating instructions carefully before installation and use,
and keep these instructions handy for future reference. Take special note of all warnings listed in
these instructions and on the unit.
1. Water and Moisture
The transmitter should not be used near water. For example: near a bathtub, washbowl,
kitchen sink, laundry tub, swimming pool or in a set basement.
2. Ventilation
The unit should be situated so that its location or position does not interfere with its proper
ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that
may block the ventilation openings. The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers, table-cloths, curtains, etc. Also, it
should not be placed in a built-in installation, such as a bookcase or cabinet, which may
impede the flow of air through the ventilation openings.
3. Heat & Flame
The unit should be situated away from heat sources such as radiators, heat registers, stoves
or other appliances (including amplifiers) that produce heat.
No naked flame sources, such as lighted candles, should be placed on the apparatus.
4. Power Source
The unit should be connected to a power supply only of the type described in the operating
instructions or as marked on the appliance.
Where the AC/DC Adaptor is used as the disconnect device, the disconnect device shall
remain readily operable.
5. Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them. It is always best to have a clear area from where the cord
exits the unit to where it is plugged into an AC outlet.
6. Cleaning
The unit should be cleaned only as recommended. See the section "Care and Maintenance"
of this manual for cleaning instructions.
7. Object and Liquid Entry
Care should be taken so that objects do not fall and liquids are not spilled into any openings
or vents located on the transmitter. It shall not be exposed to dripping or splashing and that
no objects filled with liquids, such as vases, shall be placed on the apparatus.
8. Attachments
Do not use attachments no recommended by the product manufacturer.
9. Lightning and Power Surge Protection
Unplug the unit from the wall outlet and disconnect the periods of time. This will prevent
damage to the product due to lightning and power-line surges.
10. Overloading
Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result in a risk of fire of electric shock.
11. Damage Requiring Service
This unit should be serviced by qualified service personnel when:
A. The power supply cord or plug has been damaged.
B. Objects have fallen into or liquid has been spilled into the enclosure.
C. The unit has been exposed to rain.
D. The unit has been dropped or the enclosure damaged.
E. The unit exhibits a marked change in performance or does not operate normally.
12. Periods of Nonuse
If the unit is to be left unused for an extended period of time, such as a month or longer, the
power cord should be unplugged from the unit to prevent damage or corrosion.
13. Servicing
The user should not attempt to service the unit beyond those methods described in the user's
operating instructions. Service methods not covered in the operating instructions should be
referred to qualified service personnel.
IPS260 5 lang ib.indd 4-5 2011-4-28 10:36:53

Specyfikacje produktu

Marka: Lenco
Kategoria: głośnik
Model: IPS-260

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Lenco IPS-260, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Lenco

Lenco

Lenco BT-4650 Instrukcja

5 Października 2024
Lenco

Lenco PA-46 Instrukcja

4 Października 2024
Lenco

Lenco PA-360 Instrukcja

1 Października 2024
Lenco

Lenco BT-272 Instrukcja

30 Września 2024
Lenco

Lenco BT-180 Instrukcja

30 Września 2024
Lenco

Lenco BT-210 Instrukcja

28 Września 2024
Lenco

Lenco BTP-400 v2 Instrukcja

28 Września 2024
Lenco

Lenco City Romance BTSW-1 Instrukcja

27 Września 2024
Lenco

Lenco PA-100 Instrukcja

24 Września 2024
Lenco

Lenco BTS-5 Instrukcja

17 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024