Instrukcja obsługi LD Systems IMA RK

LD Systems Receiver IMA RK

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LD Systems IMA RK (12 stron) w kategorii Receiver. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/12

USER´S MANUAL

BEDIENUNGSANLEITUNG

IMA RK

RACK- AND UNDER TABLE MOUNT KIT FOR IMA 30 / IMA 60

LDIMARK

CONTENTS / INHALTSVERZEICHNIS

ENGLISH

SAFETY INFORMATION 3

INTRODUCTION 3

RACK MOUNTING 4

UNDER-TABLE MOUNTING 5

TECHNICAL DATA 6

MANUFACTURER´S DECLARATIONS 6

DEUTSCH

SICHERHEITSHINWEISE 7

EINLEITUNG 7

RACK-MONTAGE 8

UNTERTISCH-MONTAGE 9

TECHNISCHE DATEN 10

HERSTELLERERKLÄRUNGEN 10

DEUTSCH ENGLISH

ENGLISH

YOU‘VE MADE THE RIGHT CHOICE!

We have designed this product to operate reliably over many years. LD Systems stands for this with its name and many years of experience as

a manufacturer of high-quality audio products. Please read this User‘s Manual carefully, so that you can begin making optimum use of your LD

Systems product quickly.

You can nd more information about LD-SYSTEMS at our Internet site WWW.LD-SYSTEMS.COM

SAFETY INFORMATION

1. Please read these instructions carefully.

2. Keep all information and instructions in a safe place.

3. Follow the instructions.

4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.

5. Use the equipment only in the intended manner and for the intended purpose.

6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain that wall mounts are properly installed

and secured. Make certain that the equipment is installed securely and cannot fall down.

7. During installation, observ e the applicable safety regulations for your country.

8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is

always installed so that is cooled sufficiently and cannot overheat.

9. Never place sources of ignition, e.g., burning candles, on the equipment.

10. Ventilation slits must not be blocked.

11. Keep a minimum distance of 20 cm around and above the device.

12. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment - in this case, observe the special

instructions noted below. Do not expose this equipment to flammable materials, fluids or gases. Avoid direct sunlight!

13. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or drinking

vessels, on the equipment.

14. Make certain that objects cannot fall into the device.

15. Use this equipment only with the accessories recommended and intended by the manufacturer.

16. Do not open or modify this equipment.

17. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.

18. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.

19.

If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if it has been damaged in anot her

way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired by authorized,

qualified personnel.

20. Clean the equipment using a dry cloth.

21. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.

22. Plastic bags must be kept out of reach of children.

23. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user´s

authority to operate the equipment.

INTRODUCTION

The seven-piece IMA RK rack- and under table mount kit allows you to install the mixing ampliers of the IMA series into a 19-inch rack, under a shelf,

a table or under a counter.

The following congurations are possible:

• One IMA device in a 19-inch rack (2 RU)

• One IMA device under a table, a shelf, or under a counter

• Two IMA devices together in a 19-inch rack (2 RU)

The set includes one long rack mount bracket, two short rack / shelf mount brackets, two small plates for the back, two big plates for the bottom

side, four M4 at-headed screws for the rack mount brackets and eight M3 countersunk screws for the bottom plates.

FEATURES

• Rack and under table mount kit for IMA series mixing amplifiers

• For mounting one single unit or two units together

• One IMA device in a 19-inch rack (2 RU)

• One IMA device under a table, a shelf, or under a counter