Instrukcja obsługi LD Systems IMA 30

LD Systems odbiornik IMA 30

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla LD Systems IMA 30 (88 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/88
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D´UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D´USO
IMA 30
INSTALLATION MIXING AMPLIFIER 30 W @ 4 OHMS / 100 V / 70 V
LDIMA30
CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO
ENGLISH
SAFETY INFORMATION 3
INTRODUCTION 5
CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 5
WIRING EXAMPLES 9
TERMINAL BLOCK CONNECTIONS 10
JUMPER FOR EMERGENCY SIGNAL ON AUX OUT 11
RACK MOUNTING 12
UNDER-TABLE MOUNTING 13
TECHNICAL DATA 14
MANUFACTURER´S DECLARATIONS 16
DEUTSCH
SICHERHEITSHINWEISE 17
EINLEITUNG 19
ANSCHLÜSSE, BEDIENUNG UND ANZEIGEELEMENTE 19
ANSCHLUSSBEISPIELE 23
KLEMMLEISTEN-ANSCHLÜSSE 24
JUMPER FÜR NOTFALLSIGNAL AN AUX OUT 25
RACK-MONTAGE 26
UNTERTISCH-MONTAGE 27
TECHNISCHE DATEN 28
HERSTELLERERKLÄRUNGEN 30
FRANCAIS
MESURES PRÉVENTIVES 31
INTRODUCTION 33
BRANCHEMENTS, FONCTIONNEMENT ET ÉLÉMENTS
DE L'AFFICHAGE 33
EXEMPLES DE CÂBLAGE 37
CONNEXIONS SUR LE BORNIER 38
CAVALIER POUR LE SIGNAL D'URGENCE SUR AUX OUT 39
MONTAGE EN RACK 40
MONTAGE SOUS UNE TABLE 41
DONNÉES TECHNIQUES 42
DECLARATIONS 44
ESPAÑOL
MEDIDAS DE SEGURIDAD 45
INTRODUCCIÓN 47
CONEXIONES, ELEMENTOS DE MANEJO Y ELEMENTOS
DE VISUALIZACIÓN 47
EJEMPLOS DE CABLEADO 51
CONEXIONES DEL BLOQUE DE TERMINALES 52
JUMPER PARA SEÑAL DE EMERGENCIA EN AUX OUT 53
MONTAJE EN RACK 54
MONTAJE BAJO MESA 55
DATOS TÉCNICOS 56
DECLARACIÓN DEL FABRICANTE 58
POLSKI
ŚRODKI OSTROŻNOŚCI 59
WPROWADZENIE 61
PRZYŁĄCZA, ELEMENTY OBSŁUGOWE I WSKAŹNIKI 61
PRZYKŁADOWE PODŁĄCZENIE PRZEWODÓW 65
PRZYŁĄCZA LISTWY ZACISKOWEJ 66
ZWORKA AWARYJNEGO SYGNAŁU DLA WYJŚCIA AUX OUT 67
MONTAŻ W SZAFIE RACK 68
MONTAŻ PODBLATOWY 69
DANE TECHNICZNE 70
DEKLARACJE PRODUCENTA 72
ITALIANO
MISURE PRECAUZIONALI 73
INTRODUZIONE 75
ELEMENTI DI COMANDO E DISPLAY 75
ESEMPI DI CABLAGGIO 79
RACCORDI PER MORSETTIERA 80
PONTE PER SEGNALE DI EMERGENZA SU AUX OUT 81
MONTAGGIO RACK 82
MONTAGGIO SOTTO TAVOLO 83
DATI TECNICI 84
DICHIARAZIONI DEL PRODUTTORE 86
3
DEUTSCHFRANCAISESPAÑOL ENGLISH ITALIANO POLSKI
ENGLISH
YOU‘VE MADE THE RIGHT CHOICE!
We have designed this product to operate reliably over many years. LD Systems stands for this with its name and many years of experience as
a manufacturer of high-quality audio products. Please read this User‘s Manual carefully, so that you can begin making optimum use of your LD
Systems product quickly.
You can nd more information about LD-SYSTEMS at our Internet site WWW.LD-SYSTEMS.COM
SAFETY INFORMATION
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain that wall mounts are properly installed
and secured. Make certain that the equipment is installed securely and cannot fall down.
7. During installation, observ e the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is
always installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. Keep a minimum distance of 20 cm around and above the device.
12. Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment - in this case, observe the special
instructions noted below. Do not expose this equipment to flammable materials, fluids or gases. Avoid direct sunlight!
13. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or drinking
vessels, on the equipment.
14. Make certain that objects cannot fall into the device.
15. Use this equipment only with the accessories recommended and intended by the manufacturer.
16. Do not open or modify this equipment.
17. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
18. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.
19.
If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if it has been damaged in anot her
way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired by authorized,
qualified personnel.
20. Clean the equipment using a dry cloth.
21. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
22. Plastic bags must be kept out of reach of children.
23. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user´s
authority to operate the equipment.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS
24. CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet with a protective ground.
Never deactivate the protective ground of a power cord.
25. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do not switch it on immediately.
Moisture and condensation could damage the equipment. Do not switch on the equipment until it has reached room temperature.
26. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match the values specified on the
equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the
mains power values match. If the included power cord or power adapter does not fit in your wall outlet, contact your electrician.
27. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at the mains outlet and/or power adapter
and the equipment connector.
28.
When connecting the equipment, make certain that the power cord or power adapter is always freely accessible. Always disconnect the equipment
from the power supply if the equipment is not in use or if you want to clean the equipment. Always unplug the power cord and power adapter from
the power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter with wet hands.
29.
Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this can shorten the useful life of the equipment.
30. IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an authorised
service centre.
31. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter from the power outlet.
32. If your device is equipped with a Volex power connector, the mating Volex equipment connector must be unlocked before it can be removed.
However, this also means that the equipment can slide and fall down if the power cable is pulled, which can lead to personal injuries and/or
other damage. For this reason, always be careful when laying cables.
33. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.
34. The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience
and knowledge.
35. Children must be instructed not to play with the device.
36. If the power cord of the device is damaged, do not use the device. The power cord must be replaced by an adequate cable or assembly from an
authorized service center.

Specyfikacje produktu

Marka: LD Systems
Kategoria: odbiornik
Model: IMA 30

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z LD Systems IMA 30, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik LD Systems

LD Systems

LD Systems TR 212 Instrukcja

29 Września 2024
LD Systems

LD Systems AMP 106 T Instrukcja

22 Września 2024
LD Systems

LD Systems DEEP2 2400 X Instrukcja

22 Września 2024
LD Systems

LD Systems X-ECI Instrukcja

5 Września 2024
LD Systems

LD Systems DEEP2 4950 Instrukcja

5 Września 2024
LD Systems

LD Systems X-EDAI Instrukcja

4 Września 2024
LD Systems

LD Systems MAILA SPA Instrukcja

29 Sierpnia 2024
LD Systems

LD Systems XS 700 Instrukcja

24 Sierpnia 2024
LD Systems

LD Systems XS 400 Instrukcja

22 Sierpnia 2024
LD Systems

LD Systems DEEP2 600 Instrukcja

22 Sierpnia 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

ETON

ETON MA 1 Instrukcja

19 Marca 2025
Elipson

Elipson P1 Instrukcja

14 Marca 2025
Elipson

Elipson Stream S300 Xi Instrukcja

14 Marca 2025
Elipson

Elipson WIIM Mini Instrukcja

14 Marca 2025
KanexPro

KanexPro SP-1X16SL18G Instrukcja

13 Marca 2025
Marshall Electronics

Marshall Electronics VDA-108-3GS Instrukcja

13 Marca 2025
Rega

Rega Brio MK7 Instrukcja

12 Marca 2025
Rexing

Rexing RoadMate CPStream Instrukcja

12 Marca 2025
Mtx Audio

Mtx Audio Thunder TH2500.1 Instrukcja

11 Marca 2025
Mtx Audio

Mtx Audio Thunder TH1500.1 Instrukcja

11 Marca 2025