Instrukcja obsługi Lancom 1781EF

Lancom router 1781EF

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Lancom 1781EF (2 stron) w kategorii router. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
BD9:B
LANCOM 1781EF
. . . c o n n e c t i n g y o u r b u s i n e s s
4
LANCOM 1681V
Power
VDSL
Onl ine
ETH 1
ETH 2
VPN
ETH 3
ETH 4
ISDN Sta tus
L6C
H;E
:I='
EdlZg
:I=&
Dca^cZ
>H9C
:I=)
:I=(
KEC
a c d e f ga c d e f gb b
Quick Reference Guide d Optional: Serial
conguration cable
Connects the device and
a PC for carrying out the
conguration (cable sold
separately).
c LAN
Use the cable with the
green-colored connectors
to connect one of the in-
terfaces ETH1 to ETH4 to
your PC or a LAN switch.
Please observe the fol-
lowing when setting up
the device
1 For devices to be
operated on the
desktop, please attach
the adhesive rubber
footpads
1 Do not rest any objects
on top of the device
1 Do not obstruct the side
ventilation slots
1 In case of wall
mounting,
use the drilling template
as supplied
1 Rack installation with
the optional LANCOM
Rack Mount (not
supplied)
a Power
When connecting the
cable
to the device, turn the
bayonet connector 90°
clockwise until it clicks
into place.
Use only the supplied
power adapter.
Hardware
Power supply 12 V DC, external power adapter (110 or 230 V) with bayonet connector to secure against
disconnection
Power consumption Max. ca. 7.5 W
Environment Temperature range 5 – 40 °C; humidity 0 – 95%; non-condensing
Housing Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock; measures
210 x 45 x 140 mm (W x H x D)
Number of fans None; fanless design, no rotating parts, high MTBF
Interfaces
WAN 10/100/1000 Mbps Gigabit Ethernet
ETH 4 individual 10/100/1000-Mbps Fast Ethernet ports; operate as switch ex-factory. Up to 3 ports
can be switched as additional WAN ports. Ethernet interfaces can be completely electrically
disabled in the LCOS conguration
USB USB 2.0 Hi-Speed host port for connecting USB printers (USB print server), serial devices
(COM-port servers), USB data media (FAT le system), or supported UMTS USB modems
ISDN* ISDN-S0 bus
SFP Socket for small form-factor pluggable Gigabit-Ethernet transceiver (mini-GBIC).
Compatible with optional LANCOM SFP modules for optical connections over short distances
(SX) or longer distances (LX). Set as a LAN port ex-factory, can be congured as a WAN port
Cong (COM) Serial conguration interface / COM port (8-pin Mini-DIN):
9,600 - 115,000 baud, suitable for optional connection of analog/GPRS modems. Supports
internal COM-port server and provides transparent asynchronous serial-data transmission via
TCP
WAN protocols
Ethernet PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-1,
RIP-2, VLAN, IP
Declaration of conformity
CE EN 55022, EN 55024, EN 60950
FCC FCC Class B Part 15
Package content
Manual Hardware Quick Reference (DE/EN), Installation Guide (DE/EN/FR/ES/IT/PT/NL),
FCC Documentation (only US-Version)
CD/DVD CD/DVD with rmware, management software (LANcong, LANmonitor) and documentation
Cable 2 Ethernet cables, 3m (LAN: kiwi-colored connector; WAN: green connector)
Cable* ISDN cable, 3 m
Power adapter External power supply adapter, NEST 12 V/1.5A DC/S, barrel connector 2.1/5.5 mm bayonet,
LANCOM item no. 110723 (EU, 230 V),
LANCOM item no. 110829 (UK, 230 V),
LANCOM item no. 111007 (US, 110 V)
*) ISDN is not available in US version
b WAN
Use the cable with the
green connectors to con-
nect the WAN interface to
your WAN modem.
License information for the device rmware (LCOS) is available in the le LCOS-Licenses.txt on the data medium sup-
plied.
a Power
Off Device switched off
Green on
(permanently)
Device operational
Blinking red/green Conguration password not set. Without a
conguration password, the conguration
data in the device is unprotected.
Blinking red Hardware error
Slow blinking in red Time or charge limit reached/error message
occurred
b Online
Off WAN connection inactive
Green on
(permanently)
WAN connection active
Red on
(permanently)
WAN connection error
c SFP
Off SFP-1 deactivated in the conguration
or
SFP module present, no connection to
network device
Red on
(permanently)
SFP-1 enabled in the conguration but no
SFP module present
Green on
(permanently)
SFP module present, connection to net-
work exists, no data transmission
Blinking green Data transmission
Blinking red SFP module present, hardware error
g VPN
Off No VPN connection active
Green on
(permanently)
VPN connection active
Blinking green Establishing VPN connection
f ETH
Off No link
Green on
(permanently)
Network connection ready (link)
Flickering green Data transmission
e ISDN*
Off Interface deactivated
Green on
(permanently)
D channel active
Orange on
(permanently)
B channel active
Flickering green ISDN data transmission
Flickering red ISDN communications error
Blinking red/orange ISDN hardware error
d WAN
Off Interface deactivated
Blinking orange Synchronization with the modem
Orange on
(permanently)
Synchronization with the modem suc-
cessful
Green on
(permanently)
WAN connection established
Flickering green WAN data transmission
e Optional: USB
Connect a USB data
medium or a USB printer
to the USB interface. USB
cable not supplied
f ISDN cable*
Use the ISDN cable with
the light-blue connectors
to connect the ISDN in-
terface to the NTBA if you
wish to use ISDN in addi-
tion.
g Fiber-optic cable
Insert a suitable SFP module (e.g.
1000Base-SX or 1000Base-LX) into
the socket. Choose the cable with
the connectors that t to the
SFP module and connect it as
described in the SFP module's
documentation. The SFP module
and the associated connector
cable are not supplied.
LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice.
No liability for technical errors and/or omissions. 111029/0612
T E C H N I C A L D E T A I L S
M O U N T I N G A N D C O N N E C T I N G T H E D E V I C E


Specyfikacje produktu

Marka: Lancom
Kategoria: router
Model: 1781EF

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Lancom 1781EF, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje router Lancom

Lancom

Lancom 1800VA-5G Instrukcja

2 Października 2024
Lancom

Lancom 1803VA-5G Instrukcja

2 Października 2024
Lancom

Lancom 1781VA-4G Instrukcja

2 Października 2024
Lancom

Lancom IAP-1781VAW+ Instrukcja

2 Października 2024
Lancom

Lancom 1800VAW Instrukcja

25 Września 2024
Lancom

Lancom 1800VAW-4G Instrukcja

25 Września 2024
Lancom

Lancom 1781A Instrukcja

23 Września 2024
Lancom

Lancom 1781VA Instrukcja

23 Września 2024
Lancom

Lancom 1722 VoIP Instrukcja

16 Września 2024
Lancom

Lancom 1781EF Instrukcja

16 Września 2024

Instrukcje router

Najnowsze instrukcje dla router

Netgear

Netgear LB2120 4G LTE Instrukcja

15 Października 2024
Linksys

Linksys WRT3200ACM Instrukcja

15 Października 2024
D-Link

D-Link DAP-1360 Instrukcja

15 Października 2024
TP-Link

TP-Link Archer AXE75 Instrukcja

14 Października 2024
Linksys

Linksys EA8500 Instrukcja

13 Października 2024
Totolink

Totolink ND300 Instrukcja

12 Października 2024
ZyXEL

ZyXEL LTE 7460 Instrukcja

10 Października 2024
Netgear

Netgear Nighthawk R7200 Instrukcja

10 Października 2024
Netgear

Netgear FR114P Instrukcja

10 Października 2024
Asus

Asus RT-BE86U Instrukcja

9 Października 2024