Instrukcja obsługi La Crosse WS-9133U-IT

La Crosse Stacja pogodowa WS-9133U-IT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla La Crosse WS-9133U-IT (6 stron) w kategorii Stacja pogodowa. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/6

WIRELESS 915 MHz WEATHER STATION

Instruction Manual

Contents

Language Pages

English 1

French 22

Spanish 43

TABLE OF CONTENTS

Topic Pa

Inventor

of Contents 2

Features 3

Settin

Up 4

Batter

Installation 5

Function ke

LCD Screen and Settin

Manual Settin

Alarm settin

and snooze 11

Weather forecast icons and tendenc

Indoor temperature and MIN/MAX records 14

Outdoor temperature and MIN/MAX records 14

Resettin

MIN/MAX records 14

915 MHz Reception 15

Mountin

Care and Maintenance 17

Specifications 18

Warrant

Information 19

INVENTORY OF CONTENTS

1. Wireless Temperature Station

2. Wireless Temperature Sensor (TX37U-IT) and mounting bracket

3. Instruction Manual

Battery

compartment

FEATURES:

The Weather station

Function

keys Foldout stand

Battery

compartment

cover

Hanging hole

This product offers: INSTANT TRANSMISSIO

is the state-of-the-art

new wireless transmission technology,

exclusively designed and developed by LA

CROSSE TECHNOLOGY. INSTANT

TRANSMISSION offers you an immediate

update (every 4 seconds!) of all your outdoor

data measured from the transmitters: follow

your climatic variations in real-time!

 Time display (hour and minutes)

 12/24 hour display Alarm function with snooze

 Temperature display in degree Farenheit (ºF) or Celsius (°C)

 Indoor and outdoor temperature with MIN/MAX records

 Manual reset of MIN/MAX records

 Weather forecast with weather tendency indicator

 Wireless transmission at 915 MHz

 Signal reception intervals at 4 seconds

 Low battery indicator

 Wall mounting or table standing (foldout stand)

The Outdoor Temperature Transmitter

 Remote transmission of outdoor temperature to

Temperature Station by 915 MHz signals

 Rain resistant casing

 Wall mounting and table-standing

SETTING UP:

Note: This weather station receives only one outdoor transmitter.

1. First, insert the batteries into the Temperature transmitter. (see “Install

and replace batteries in the Temperature transmitter“).

2. Immediately after and within 30 seconds, insert the batteries into

Weather station (see “Install and replace batteries in the Weather

station”). Once the batteries are in place, all segments of the LCD will

light up briefly. Following the time as 12:00 and the weather icon will be

displayed. If these are not displayed after 60 seconds, remove the

batteries and wait for at least 10 seconds before reinserting them.

3. After inserting the batteries, the Weather station will start receiving data

from the transmitter. The outdoor temperature and the signal reception

icon should then be displayed on the Weather station. If this does not

happen after 3 minutes, the batteries will need to be removed from both

units and reset from step 1.

4. In order to ensure sufficient 915 MHz transmission however, this should

under good conditions be a distance no more than 100 meters (330

feet) between the final position of the Weather Station and the

transmitter (see notes on “Mounting” and “915 MHz Reception”).

HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE

STATION

The Weather Station uses 3 x AA, IEC LR6, 1.5V batteries. When batteries

will need to be replaced, the

low battery icon will appear on

the LCD. To install and replace

the batteries, please follow the

steps below:

1. Lift up the battery

compartment cover.

2. Insert batteries observing

the correct polarity (see

marking).

3. Replace compartment

cover.

HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE

TRANSMITTER The Temperature Transmitter uses 2 x AA, IEC LR6,

1.5V battery. To install and replace the batteries,

please follow the steps below:

1. Remove the battery compartment cover at the

back of the transmitter.

2. Insert the batteries, observing the correct polarity

(see marking).

3. Replace the battery compartment cover on the

unit.

Note:

In the event of changing batteries in any of the units, all units need to be reset

by following the setting up procedures. This is because a security code is

assigned by the transmitter at start-up and this code must be received and

stored by the Weather station in the first 3 minutes of power being supplied to

it.

BATTERY CHANGE:

It is recommended to replace the batteries in all units regularly to ensure

optimum accuracy of these units (Battery life See Specifications below).

Please participate in the preservation of the environment.

Return used batteries to an authorized depot.

FUNCTION KEYS:

Weather station:

The weather station has four easy to use function keys.

SET key

 Press the key to enter manual setting modes: time, 12/24 hour time

display, and temperature unit (ºC/ºF) setting

 Stop the alarm

+ key

 To make adjustment for various settings

 Stop the alarm

ALARM key

 Enter the alarm setting mode

 Switch the alarm ON/ OFF

 Stop the alarm

MIN/MAX RESET key

 Press and hold to reset the MIN/MAX temperature records

 Activate the snooze

 Exit manual setting modes

SET ke

MIN/MAX RESET key

LARM key

+ ke

Outdoor

Reception

Signal icon*

MIN/MAX indoo

temperature MIN/MAX outdoor

temperature

LCD SCREEN AND SETTINGS:

* When the outdoor signal is successfully received by the Weather Station,

this icon will be switched on. (If not successful, the icon will not be shown in

LCD) So user can easily see whether the last reception was successful (icon

on) or not (icon off).

For a better display clarity, the LCD screen is split into 3 sections.

Section 1 - TIME AND ALARM

 Display of time

Time

Indoo

Temperature

in °C/ °F

Outdoor

Temperature

in °C/ °F

Weathe

tendenc

indicato

Weather

forecast icon

Low batter

indicato

(weathe

station)

Low battery

indicator

(transmitter)

Alarm icon

Minutes (flashing)

Hours (flashing)

 Display the alarm icon will be shown when the alarm is turned on. Or

when the snooze function is activated, the alarm icon will be flashing.

Section 2 - WEATHER FORECAST AND WEATHER TENDENCY ICONS

 Display of the weather to be expected in form of three weather symbols

and two weather tendency indicators in form of an arrow, which change

their appearance depending on the air pressure development

Section 3 – INDOOR AND OUTDOOR TEMPERATURE

 Display the current indoor temperature with MIN/MAX records

 Display of low battery indicator (weather station)

 Display the current outdoor temperature with MIN/MAX records

 A signal reception symbol will be shown indicating that receiver is

receiving outdoor temperature

 Display of low battery indicator (transmitter)

MANUAL SETTINGS:

The following manual settings can be done in the setting mode:

 Time

 12/24 time format

 Temperature unit setting

Press and hold the SET key for about 3 seconds to advance to the setting

mode:

MANUAL TIME SETTING

To set the clock:

1. The hour digits start flashing in the time display section.

Flashing

2. Use the + key to adjust the hours and then press SET key to go to the

minute setting.

3. The minute will be flashing. Press the + key to just the minutes.

4. Confirm with the SET key and the enter the 12/24 hour time display

setting

12/24 HOUR TIME DISPLAY SETTING

The time can be set to display in 12h or 24h time format. Default setting 12h

time format. To change the setting:

1. The current time format starts flashing

2. Use the + key to select 12h or 24h time display.

3. Confirm with the SET key and enter the Temperature unit setting.

TEMPERATURE UNIT SETTING (ºF/ºC):

The temperature unit can set to display temperature data in degree

Fahrenheit (ºF) or Celsius (ºC); default setting is ºF. To change the setting:

1. The current temperature value starts flashing.

2. Use the + key to change the unit.

3. Confirm with the SET key and exit the setting mode.

Flashing

Alarm icon (ON)

larm time

ALARM SETTING

To set alarm:

1. Press and hold ALARM for about 3 seconds until the alarm time display

flashes.

2. The hour digit and the alarm icon will be flashing. Press the + key to

adjust the hour.

3. Press ALARM button once and minute digit will be flashing. User shall

then press + button to set the minute.

4. Press ALARM button once to confirm the setting.

5. To activate/ deactivate the alarm function, press the ALARM button

once. The display of the alarm icon represents that the alarm is "ON".

Note: The duration of alarm sounding is 85 seconds

TO ACTIVATE THE SNOOZE FUNCTION AND STOPPING THE ALARM:

1. When the alarm is sounding, press the MIN/MAX RESET key to

activate the snooze function. The alarm will stop and re-activate after

the snooze interval of 10 minutes.

2. To stop the alarm completely, press any keys other than the MIN/MAX

RESET key.

WEATHER FORECAST AND TENDENCY

THE WEATHER FORECASTING ICONS :

There are 3 weather icons in the second section of LCD which can be

displayed in any of the following combinations :

For every sudden or significant change in the air pressure, the weather icons

will update accordingly to represent the change in weather. If the icons do not

change, then it means either the air pressure has not changed or the change

has been too slow for the Weather station to register. However, if the icon

displayed is a sun or raining cloud, there will be no change of icon if the

weather gets any better (with sunny icon) or worse (with rainy icon) since the

icons are already at their extremes.

The icons display weather forecasts in terms of getting better or worse, and

not necessarily sunny or rainy as each icon indicates. For example, if the

current weather is cloudy and the rainy icon is displayed, it does not mean

that the product is faulty because it is not raining. It simply means that the air

pressure has dropped and the weather is expected to get worse but not

necessarily rainy.

Note :

After setting up, readings for weather forecasts should be disregarded for the

next 48-60 hours. This will allow sufficient time for the Weather Station to

collect air pressure data at a constant altitude and therefore result in a more

accurate forecast.

Common to weather forecasting, absolute accuracy cannot be guaranteed.

The weather forecasting feature is estimated to have an accuracy level of

about 75% due to the varying areas the Weather Station has been designed

Rainy

Cloudy with

sunny intervals

Sunny

Specyfikacje produktu

Marka:	La Crosse
Kategoria:	Stacja pogodowa
Model:	WS-9133U-IT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z La Crosse WS-9133U-IT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Stacja pogodowa La Crosse

La Crosse WS-8010U Instrukcja

24 Września 2024

La Crosse WS-9635 U-IT-CA Instrukcja

23 Września 2024

La Crosse Heavy Weather Pro software Instrukcja

23 Września 2024

La Crosse WS9130 Instrukcja

23 Września 2024

La Crosse WS-1501 Instrukcja

21 Września 2024

La Crosse WS-9662U-IT CA Instrukcja

17 Września 2024

La Crosse WS-1510-IT Instrukcja

17 Września 2024

La Crosse WM9280 Instrukcja

17 Września 2024

La Crosse WS-2812-IT Instrukcja

16 Września 2024

La Crosse WS-9151U Instrukcja

16 Września 2024

Instrukcje Stacja pogodowa

Najnowsze instrukcje dla Stacja pogodowa

Hyundai WSP 3080 Instrukcja

15 Października 2024

Livoo SL262 Instrukcja

9 Października 2024

Muse M-085 WS Instrukcja

8 Października 2024

La Crosse Technology S77925v3 Instrukcja

8 Października 2024

TFA 30.5045.54 Instrukcja

8 Października 2024

La Crosse Technology V61 Instrukcja

8 Października 2024

Davis DAV-6520 Instrukcja

7 Października 2024

Brandson 304633 Instrukcja

7 Października 2024

Brandson 305385 Instrukcja

7 Października 2024

GlobalTronics WT-440 Instrukcja

6 Października 2024