Instrukcja obsługi La Crosse WS- 1912

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla La Crosse WS- 1912 (20 stron) w kategorii Stacja pogodowa. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/20
1
WS- 1912 WEATHER CENTER
Instruction Manual
2
Table of Contents
Topic Page
Inventory of contents 3
Features 4
Setting up 6
Function keys 11
LCD screen 12
Manual settings 14
Weather forecast and weather tendency 20
Wind speed measurement 22
Rainfall measurement 22
Viewing history data 23
Viewing the MIN/MAX weather data 25
Outdoor transmission 915 MHz reception 21
Positioning 32
Care and maintenance 35
Specifications 36
Warranty information 37
3
WS-1912 WEATHER CENTER
Instruction Manual
INTRODUCTION:
Congratulations on purchasing this state-of-the-art weather station as an example of
excellent design and innovative measuring technique. Featuring time, date, calendar,
weather forecast, wind gust and wind speed, indoor/outdoor temperature and outdoor
humidity, air pressure and rainfall (optional), this weather station will provide you with
various weather information and weather forecast. Pages after pages, you will discover
that the operation of your weather station is really simple!
INVENTORY OF CONTENTS
1. Wireless Weather Station
2. Wireless Thermo-hygro Sensor (TX31U-IT) and Wind Sensor (TX55U-IT) with
mounting bracket.
3. Instruction Manual
INSTANT TRANSMISSION is the state-of-the-art
new wireless transmission technology,
exclusively designed and developed by LA
CROSSE TECHNOLOGY. INSTANT
TRANSMISSION offers you an immediate update
(every 4.5 seconds!) (6.25 seconds for rain
sensor - optional) of all your outdoor data
measured from the transmitters: follow your
climatic variations in real-time!
This product offers:
4
FEATURES:
The Weather Station
Time display (manual setting)
12/24 hour time display
Calendar display (weekday, date, month, year)
Weather forecast icons and weather tendency indicator
Indoor temperature display in °C/ºF
Outdoor temperature display in °C/ºF
Outdoor Humidity display as RH%
Dew point displayed in °C or °F
Wind chill displayed in °C of °F
Wind gust displayed in km/h, mph or m/s
Wind speed displayed in km/h, mph or m/s
24-hour and total rainfall displayed in mm or inch (optional)
Display MIN/MAX value of outdoor temperature, outdoor humidity, dew point, wind
chill, and relative air pressure, with time & date of recording
Display MAX wind speed and gust with time & date of recording
Relative air pressure displayed in hPa or inHg
Air pressure tendency indicator for the past 12 hour (bar graph format)
Manual reset of outdoor temperature/ humidity, pressure and wind chill data
Function
keys
LCD
Foldout stand
Battery
compartment
cover
Hanging hole
5
LCD contrast selectable
Low battery indicator
Storage of 140 sets of history weather data recorded in 3-hour intervals
Wireless transmission at 915 MHz
Transmission range up to 330 feet/100 meters
The Thermo-hygro Transmitter
Remote transmission of the outdoor temperature and humidity to the
Weather Center at 915 MHz (open air)
Rain resistant casing
Wall mounting case (to be mounted vertically in a sheltered place.
Avoid direct rain and sunshine)
The Wind sensor
Connected to the thermo-hygro transmitter by
cable
Can be installed onto a mast or a horizontal
panel (with the cups on the bottom)
The rain sensor (optional- sold separately)
Remote transmission of the rainfall data to the
Weather Center at 915 MHz
To be mounted onto a horizontal panel
(TX32U-IT)
6
Cable connection between the wind sensor and
the thermo-hygro transmitter
OPTIONAL
Wireless transmission
at 915 MHz – Rain
sensor to weather
station
Wireles
s
transmission a
t
915 MHz - thermo
-
hygro transmitte
r
to weather station
Weather center
Wind sensor
Rain sensor (optional)
Thermo-hygro
transmitte
r
SETTING UP:
Note:
When putting the Weather Station into operation, it is
important to completely setup the wiring and rest of the
system in close proximity (e.g. on a table 5ft from display)
and test all components for correct function before placing
and mounting them at their final destinations (See
Positioning below) (Allow all sensors to sit with the display
unit for 15 minutes before mounting)
1. First, unwind the cables of the Wind sensor. Connect
the Wind sensor to the Thermo-hygro transmitter by
plugging the connector head into the socket of the
Thermo-hygro sensor.
Socket for wind
sensor

Specyfikacje produktu

Marka: La Crosse
Kategoria: Stacja pogodowa
Model: WS- 1912

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z La Crosse WS- 1912, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Stacja pogodowa La Crosse

Instrukcje Stacja pogodowa

Najnowsze instrukcje dla Stacja pogodowa

Hyundai

Hyundai WSP 3080 Instrukcja

15 Października 2024
Livoo

Livoo SL262 Instrukcja

9 Października 2024
Muse

Muse M-085 WS Instrukcja

8 Października 2024
TFA

TFA 30.5045.54 Instrukcja

8 Października 2024
Davis

Davis DAV-6520 Instrukcja

7 Października 2024
Brandson

Brandson 304633 Instrukcja

7 Października 2024
Brandson

Brandson 305385 Instrukcja

7 Października 2024
GlobalTronics

GlobalTronics WT-440 Instrukcja

6 Października 2024