Instrukcja obsługi La Crosse Technology W85923V4


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla La Crosse Technology W85923V4 (2 stron) w kategorii Radiobudzik. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Page 3Page 2
Full manual can be found under the Support tab here: bit.ly/laxtech_support
SETTINGS
MODEL: W85923V4
DC: 033021
POWE R UP
1. Hold the SET button to enter the Settings Menu.
2. Use the + or - button to adjust and SET to confirm.
3. Press the LIGHT/SNOOZE button at any time to exit.
Settings Menu order:
• 12/24 Hour Time
• Hour
• Minutes
• Year
• Month
• Date
• Fahrenheit/Celsius
PROJ ECTION A LARM C LOCK
WITH INDOOR TEMPERATURE
QUICK START GUIDE
1. Insert the stand into the bottom of your clock.
2. Insert the 5 volt Power Cord into an outlet, then into your
clock. Optional: Install 2-AAA batteries into your clock.
AAA
AAA
Stand
PROJE CTION
Rotate Projection:
• Press the PROJECTION button to rotate the
image.
• The projected image can be rotated in 90
degree increments.
Focus Projection:
• Use the Focus Wheel on the back of your
projection arm to provide a clear projection
image.
Note: Power cord use is required for constant projection.
Focus
Wheel
ALAR M
Set Alarm:
1. Hold the ALARM button to enter Alarm Settings.
2. Use the + or - button to adjust values.
3. Press the ALARM button to confirm and move to next item.
Activate/Deactivate Alarm:
• Press the ALARM button once to view alarm time. Then press
the ALARM button to activate or deactivate the alarm.
• The Alarm Icon will show when alarm is active.
Silence a sounding alarm: Press any button except SNOOZE to
silence alarm for 24 hours.
Weekday: Sets automatically when
Year, Month and Date are set.
Page 6Page 5Page | 4
SPECIF IC ATIONS
Indoor Temperature Range: 32°F to 122°F (0°C to 50°C)
Power: 5 Volt power cord included (required) HX075-0500550-AU-001
2-AAA batteries not included, backup for time and date
The plug on the power adapter is intended to serve as the disconnect device, the
socket-outlet shall be installed near the equipment and shall be easily
Battery Life: Over 12 months
Dimensions: 5.9” L x 2.3” W x 4.4” H inch (14.98 x 5.84 x 11.17cm)
BUTTON F UNCTIONS
The buttons are located on the back of your clock.
SNOOZE
LIGHT
Press to adjust backlight HIGH-MEDIUM-LOW-OFF.
Sounding Alarm: Press to snooze alarm for 10 minutes.
ALARM
Press toview alarm time.
Press again to activate/deactivate alarm.
Hold to enter Alarm Settings.
SET Hold to enter the Settings Menu.
+ (PLUS) Settings Menu: Press to increase value.
Hold to increase quickly.
- (MINUS) Settings Menu: Press to decrease value.
Hold to decrease quickly.
PROJECTION Press to rotate Projection Image in 90 degree
increments.
ADJUSTA BLE BACKLI GH T
Backlight and projection are on constantly. Press SNOOZE/Power Cord:
LIGHT to adjust the backlight: High-Medium-Low-OFF.
Press the SNOOZE/LIGHT button for a 10 second Batteries only:
backlight and projection.
Snooze:
• When the alarm sounds, press the SNOOZE/LIGHT button to
silence the alarm for 10 minutes. Zz will flash.
Note: The alarm will sound with increasing frequency for two
minutes, then shut off completely if not deactivated.
WAR R A N T Y I N F O
La Crosse Technology, Ltd. provides a (from date of purchase) on this product 1-year limited time warranty
relating to manufacturing defects in materials & workmanship.
La Crosse Technology, Ltd.
2830 S. 26th St.
La Crosse, WI 54601
For Full Warranty Details, Visit: www.lacrossetechnology.com/support
CAR E + M A I N T ENANCE
Do not mix old and new batteries.
Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
Always purchase the correct size and grade of battery most suitable for intended use.
Clean the battery contacts and also those of the device prior to battery installation.
Ensure the batteries have with correct polarity (+ / -).
Remove batteries from equipment that will not to be used for an extended period.
Promptly remove expired batteries.
FCC S TAT EM E N T
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
CAUTION!
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed
using electronic, mechanical or chemical process without the written permission
of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections
are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or
their consequences. All trademarks and patents are recognized.
WARNING: This product can expose you to chemicals including styrene, which is known to the State of
California to cause cancer. For more information go to: www.P65Warnings.ca.gov
If you require additional support, get in touch with our friendly customer
support team based out of La Crosse, WI.
Phone: 1-608-782-1610
Online: bit.ly/contact_techsupport
Our knowledgeable customer support team is available:
Monday-Friday, 8am-6pm CST.
JOIN THE CONV ERSATION
Ask questions, watch detailed setup videos, and provide feedback on our
social media outlets!
WERE H ERE TO HELP!


Specyfikacje produktu

Marka: La Crosse Technology
Kategoria: Radiobudzik
Model: W85923V4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z La Crosse Technology W85923V4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Radiobudzik La Crosse Technology

Instrukcje Radiobudzik

Najnowsze instrukcje dla Radiobudzik

Insignia

Insignia NS-ALCL24 Instrukcja

15 Października 2024
Bearware

Bearware 307021 Instrukcja

9 Października 2024
Bearware

Bearware 307022 Instrukcja

9 Października 2024
Bearware

Bearware 307028 Instrukcja

9 Października 2024
Bearware

Bearware 307023 Instrukcja

9 Października 2024
Muse

Muse M-179 P Instrukcja

8 Października 2024
Elta

Elta 4574 Instrukcja

8 Października 2024
Elta

Elta 4248N Instrukcja

8 Października 2024
Elta

Elta 4250N Instrukcja

8 Października 2024
Elta

Elta 4569 Instrukcja

8 Października 2024