Instrukcja obsługi La Crosse Technology 75906


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla La Crosse Technology 75906 (2 stron) w kategorii Radiobudzik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
Caution: To prevent electrical shock do not use this (polarized). plug with an
extension cord, receptacle, or other outlet unless the blades can be fully inserted
to prevent blade exposure.
Two Year Limited Warranty (U.S.A.)
Equity products are warranted for two years from the date of consumer purchase
against defects in material and workmanship. During this period such defects will be
repaired, or the product will be replaced at Equitys option, without charge. This
warranty does not cover damage caused by misuse or negligence. ALL IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR FITNESS AND
MERCHANTABILITY, ARE LIMITED IN DURATION T0 A PERIOD ENDING TWO YEARS FROM
DATE OE PURCHASE . Some states do not allow limitations on how long an implied
warranty lasts sothe above limitation may not apply to you. This warranty give you
specific legal rights and you may also have other rights which vary from State to State.
CA UTION : TO RE DUCE THE
RI SK OF EL EC TR IC SH OC K,
D O N O T R E M O V E C O V E R
( O N B A C K ) . N O U S E R -
S E R V I C E A B L E P A R T S
IN SI D E. RE F ER S ER VI C IN G
T O Q U A L I F I E D S E R V I C E
PERSONNEL.
Th e exc l ama ti o n
po i nt wi t h i n t h e
triangle is a warning
sign alerting you of
impor tant instruc-
tions accompanying
the product.
The lightning flash
a n d a r r o w h e a d
within the triangle
is a wa rnin g sign
a l e r t i n g y o u o f
"dangerous voltage"
inside the product.
If your product is not working properly, please send:
- the product
- a letter explaining the problem
- and $5.00 for postage and handling to :
Equity by La Crosse
Warranty Department
2830 26th St. S.
La Crosse, WI 54601
Made in China Printed in China
Please read this before operating your clock
1.8” RED LED ALARM CLOCK
Model 75906
Warning: Changes or modications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment
1. Read Instructions-All the safety and operating instructions should be read before the
appliance is operated.
2. Retain Instructions - The safety and operating instructions should be retained for future
reference.
3. Water and Moisture - The appliance should not be used near water - for example, near a
bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool,
and the like.
4. Ventilation - The appliance should be situated so that its location or position does not interfere
with its proper ventilation, For example, the appliance should not be situated on a bed, sofa,
rug, or similar surface that may block the ventilation openings,or, place in a built-in installa-
tion, such as a bookcase or cabinet that may impede the ow of air through the ventilation
openings.
5. Heat - The appliance should be situated away from heat sources such as radiators, heat
registers, stoves, or other appliances (including ampliers) that produce heat.
6. Power Sources-The appliance should be connected to a power supply only of the type
described in the operating instructions or as marked on the appliance.
7. Grounding or Polarization-The precaution should be taken so that the grounding or polariza-
tion means of an appliance is not defeated.
8. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they exit from the appliance.
9. Cleaning - The appliance should be cleaned only as recommended by the manufacturer.
10. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not
spilled into the enclosure through openings.
11. Damage Requiring Service - The appliance should be serviced by qualied service personnel
when:
A. The power -supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a marked change in
performance; or
E. The appliance has been dropped, or the enclosure damaged.
12. Servicing - The user should not attempt to service the appliance beyond that described in the
operating instructions. All other servicing should be referred to qualied service. personnel.
Safety Instructions
Features
• 1.8” LED display
• Hi/Lo display dimmer
• Repeat 9 Minute snooze
• Requires one 9V battery for back-up
• AC 120V, 60 Hz, ETL approved
ATTENTION : POUR PRÉVENIR LES CHOCS ÉLECTRIQUES NE
PAS UTILISER CETTE FICHE POLARISÉE AVEC UN
PROLONGATEUR, UNE PRISE DE COURANT, OU UNE AUTRE
SORTIE DE COURANT SAUF SI LES LAMES PEUVENT ETRE
INSÉRÉES À FOND SANS EN LAISSER AUCUNE PARTIE À
DÉCOUNVERT.
Power Supply
* Begin by plugging in the power cord into a standard household outlet.
The display will ash indicating the time is ready to be set.
Setting The Time
* Hold down the
TIME
button and then press the
HOUR
button to set the correct hour
.
The PM indicator will light when the hour is advanced into the PM time.
* Hold down the
TIME
button and then press the
MINUTE
button to set the correct minute.
* Release the
TIME
button when the correct time is shown on display.
Using The Snooze
* Press the button when the alarm sounds to stop the alarm and SNOOZE
the alarm will sound again in nine minutes.
* The snooze function can be repeated many times.
Using The Display Dimmer Switch
* Slide the display dimmer switch to the position for normal display.Hi/Lo Lo
* Slide the display dimmer switch to the position for brighter display.Hi/Lo Hi
Battery Backup
* Insert one “9V battery into the battery compartment at the back of the clock.
The battery will keep the alarm and time settings until the power is restored.
The LED display will not light-up but the alarm will sound at the preset alarm time.
If there is no battery installed but the power is interruped,
the display will ash at 12:00 and the time and alarm need to be set again.
Battery Warning
Clean the battery contacts and also those of the device prior to battery installation. Follow the polarity
(+) and (-) when inserting battery.
FCC Information:
This equipment has been tested and found to comply with the limits for a Class B device, pursuant to
Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Setting The Alarm
* Hold down the
ALARM
button and then press the
HOUR
button to set the correct hour
.
The
PM
indicator will light when the hour is advanced into the PM time.
* Hold down the
ALARM
button and then press the
MINUTE
button to set the correct minute.
* Release the ALARM
button when the correct alarm time is shown on display.
.
* Slide the
ALARM On/O
switch to the
On
position to activate the alarm.
The alarm indicator will appear on the lower left side of display.
* Slide the
ALARM On/O
switch to the
O
position to deactivate the alarm .
Using The Alarm
Plesae help in preservation of the environment and return used batteries to an authorized depot.
Remove the battery from the clock if you do not intend to use for an extended period of time.
ALARM TIME MINUTE HOUR
Alarm Time MinuteSnooze Hour
PM
ALARM
PM Light
Indic orat
Time
Display
Alarm Light
Indic orat
Dimmer
Hi/Lo
www.equitybylacrosse.com/support www.equitybylacrosse.com/support
www.equitybylacrosse.com/support www.equitybylacrosse.com/support


Specyfikacje produktu

Marka: La Crosse Technology
Kategoria: Radiobudzik
Model: 75906

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z La Crosse Technology 75906, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Radiobudzik La Crosse Technology

Instrukcje Radiobudzik

Najnowsze instrukcje dla Radiobudzik

Insignia

Insignia NS-ALCL24 Instrukcja

15 Października 2024
Bearware

Bearware 307021 Instrukcja

9 Października 2024
Bearware

Bearware 307022 Instrukcja

9 Października 2024
Bearware

Bearware 307028 Instrukcja

9 Października 2024
Bearware

Bearware 307023 Instrukcja

9 Października 2024
Muse

Muse M-179 P Instrukcja

8 Października 2024
Elta

Elta 4574 Instrukcja

8 Października 2024
Elta

Elta 4248N Instrukcja

8 Października 2024
Elta

Elta 4250N Instrukcja

8 Października 2024
Elta

Elta 4569 Instrukcja

8 Października 2024