Instrukcja obsługi La Crosse Technology 616-1412V4


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla La Crosse Technology 616-1412V4 (2 stron) w kategorii Radiobudzik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Page 3Page 2
Projection Alarm Clock with
Indoor Temperature/Humidity & Backlight
Model: 616-1412v4
DC:033021
1. Hold then release the SET button to enter the Settings Menu.
2. Press and release the + or - buttons to adjust the values.
Hold to adjust quickly.
3. Press and release the SET button to confirm and move to the
next item.
Time set order:
• 12/24 hour timeHourMinutes • Year • Month • Date
• Fahrenheit/Celsius
Note: Weekday will set automatically when Year, Month, and date
are set.
S E T T I N G S
P O W E R U P
1. Insert the stand into bottom of clock.
2. Insert the 5 volt power cord into an outlet, then into your
clock. Optional: Install 2-AAA batteries into your clock.
AAA
AAA
Stand
P R O J E C T I O N
Rotate Projection:
• Press and release the PROJECTION
button to rotate the image.
• The projected image can be rotated
in 90 degree increments.
Focus Projection:
• Use the Focus Wheel on the back
of your projection arm to provide
a clear projection image.
A D J U STA B L E B AC K L I G H T
Backlight and projection are on constantly. Power Cord:
Press SNOOZE/LIGHT to adjust the backlight:
High-Medium-Low-OFF.
Press the SNOOZE/LIGHT button for a 10 Batteries only:
second backlight and projection.
Note: Power cord use is required for
constant projection.
Full manual can be found under the Support tab here: bit.ly/laxtech_support
Page 6Page 5Page | 4
If you require additional support, call our friendly customer support team based out
of La Crosse, Wisconsin.
Phone: 1.608-782-1610
Or fill out our online support request form here: bit.ly/contact_techsupport
Our knowledgeable customer support team is available:
Monday-Friday, 8am-6pm CST.
JOIN THE CONV ERSATION
Ask questions, watch detailed setup videos, and provide feedback on our social
media outlets!
W E R E H E R E TO H E L P !
S PE C I F I C ATI O N S
Indoor:
Temperature Range: 32˚F to 122˚F (0˚C to 50˚C)
Humidity Range: 10% to 99% RH
Power:
5.0 Volt power cord included (Required)
HX075-0500550-AU-001
2-AAA batteries not included, backup for time and date
The plug on the power adapter is intended to serve as the disconnect
device, the socket-outlet shall be installed near the equipment and shall
be easily accessible.
Battery Life:
Over 12 months when using reputable batteries
Dimensions:
5.9” L x 2.3” W x 4.4” H inch (14.98cm L x 5.84cm W x 11.17cm H)
A L A R M S E TT I N G S
S N O O Z E
Press the SNOOZE/LIGHT button to silence alarm for 10
minutes. will show.Zz
1. Hold the ALARM button to enter Alarm Settings.
2. Use the + or - button to adjust values. Hold to adjust quickly.
3. Press the ALARM button to confirm adjustments and move
to the next item. The alarm is active when set.
ACT I VAT E / D E A C T I VATE A L A R M
Press the ALARM button to activate or deactivate the alarm.
Alarm time will show breifly.
Press ALARM button to stop a sounding alarm for 24 hours.
When active, the Alarm Icon will show, and will diappear
when deactivated.
• If the clock display appears distorted or is not responding to
buttons, use a pen or paper clip to press the RESET button.
• This will return the clock to default settings.
R E S E T
WA R R A N T Y I N F O
La Crosse Technology, Ltd. provides a (from date of purchase) on this product 1-year limited time warranty
relating to manufacturing defects in materials & workmanship.
La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601
For Full Warranty Details, Visit: www.lacrossetechnology.com/support
C A R E + M A I N T E N A N C E
Do not mix old and new batteries.
• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
Always purchase the correct size and grade of battery most suitable for intended use.
Clean the battery contacts and also those of the device prior to battery installation.
Ensure the batteries have with correct polarity (+ / -).
Remove batteries from equipment that will not to be used for an extended period.
• Promptly remove expired batteries.
F C C S TAT E M E N T
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
CAUTION!
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed
using electronic, mechanical or chemical process without the written permission
of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections
are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or
their consequences. All trademarks and patents are recognized.
WARNING: This product can expose you to chemicals including styrene, which is known to the State of
California to cause cancer. For more information go to: www.P65Warnings.ca.gov


Specyfikacje produktu

Marka: La Crosse Technology
Kategoria: Radiobudzik
Model: 616-1412V4

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z La Crosse Technology 616-1412V4, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Radiobudzik La Crosse Technology

Instrukcje Radiobudzik

Najnowsze instrukcje dla Radiobudzik

Insignia

Insignia NS-ALCL24 Instrukcja

15 Października 2024
Bearware

Bearware 307021 Instrukcja

9 Października 2024
Bearware

Bearware 307022 Instrukcja

9 Października 2024
Bearware

Bearware 307028 Instrukcja

9 Października 2024
Bearware

Bearware 307023 Instrukcja

9 Października 2024
Muse

Muse M-179 P Instrukcja

8 Października 2024
Elta

Elta 4574 Instrukcja

8 Października 2024
Elta

Elta 4248N Instrukcja

8 Października 2024
Elta

Elta 4250N Instrukcja

8 Października 2024
Elta

Elta 4569 Instrukcja

8 Października 2024