Instrukcja obsługi Kurzweil SP7

Kurzweil klawiatura SP7

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kurzweil SP7 (15 stron) w kategorii klawiatura. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/15
● 2GB factory samples, 301 presets organized into 13 categories, featuring our German “D” 9 ft.
Concert Grand derived from the K2700. 21 effect algorithms are available to enhance the SP7’s rich
sound, including reverb, BPM-synced delay, chorus, flange, compression, various distortion types,
rotary speaker, tremolo, wah-wah and eq.
● 88-note, fully-weighted hammer-action keyboard
● 480x 272 pixel, high-resolution 4.3″ color LCD touch screen
● The most intuitive and convenient interface in Kurzweil's history.
● Full-color controller knobs and buttons enhance usability.
● The 2-in-2 out 24-bit/48 kHz audio interface with XLR-1/4″ balanced combi inputs, easily
connects to your Mac/PC via USB. Mix with the various effects on the SP7 to create new sounds.
Loopback functionality further expands the production capabilities.
● 256 Voices of Polyphony
● 512 Factory Multi Sounds
● Line I/O: 2 XLR combo inputs 2 pairs of stereo L/R 1/4” unbalanced outputs (main, monitor)
● 1/4" stereo headphone output.
● 2 switch pedal inputs; supports a single half-damper pedal (1 switch/sustain pedal is included;
half-damper pedals sold separately) 1 continuous control pedal input (pedal sold separately)
● Product size and weight: 53.1.” (1350mm) x 15.1” (384mm) x 5.8” (148mm) 27.55 lb (12.5Kg)
● Power: DC Adapter 15V, 2.5A
This manual will give you a quick overview of the SP7.
Features of the SP7
2
If your SP7 has been out in the cold during shipping, give it time to warm up to room temperature
before powering it on, since condensation may have formed inside.
Place the SP7 on a keyboard stand or on a hard, flat, level surface.
Be sure to connect the supplied DC power adapter to the DC power jack of the SP7.
Connect the DC adapter power cable to the power outlet.
Connect the supplied switch pedal to the SW1 (Sustain) jack on the back of the instrument.
If you have an additional switch pedal, plug it into the SW2 jack for sostenuto control.
If you have a MIDI CC pedal (also known as a MIDI expression or volume pedal), plug it into the CC
(VOLUME) jack for volume control.
If you are using speakers, turn the master volume all the way down on your amplifier or mixer.
Using standard (1/4-inch) audio cables, first plug into the input jacks of your amplifier or mixer, then
plug the other end of the cables into the SP7 Main Out jacks (connecting in this order minimizes the
possibility of static discharge damage.) For a mono signal, only use the LEFT (MONO) jack, and
leave the RIGHT jack unplugged.
If you are using headphones, connect stereo headphones to the headphone jack on the rear panel.
To protect your hearing, set the volume of the instrument appropriately.
Check www.kurzweil.com for system updates.
Check your SP7 current OS version by going to the Global mode Info page. Compare this
with the latest version posted on www.kurzweil.com and update as needed.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Quick Start
Setting Up the SP7
When installation is complete, press the power button on the back of the device.
When using with speakers, adjust the volume on the mixer or amplifier appropriately.
Play the keyboard while turning the SP7 volume knob to find the appropriate volume.
(If a volume pedal is connected, increase the volume on the pedal and adjust the volume on the SP7 )
If you hear distortion when using the mixer, reduce the mixer's gain or engage its pad function.
When turning off the power after use, set the master volume of the mixer or amplifier to minimum
first and then turn off the SP7 power.
1.
2.
3.
4.
5.
Powering on the SP7
Thank you for purchasing the Kurzweil SP7 Stage Piano by HDC Young Chang. This manual briefly
introduces you to the fundamentals of the SP7. The manual can also be downloaded via mobile
device by scanning the QR code (Global mode / Info page).
Software Update
3
The SP7 starts in Sound mode. To select a different sound, you can use the touch screen or use
the alpha wheel to change the current sound. Narrow selections by pressing the instrument catego-
ry buttons on the right. As you get familiar with the SP7, you can also employ the Favorite mode to
store/recall personal favorites.
You can listen to various demo songs by pressing the Global mode button and then selecting the
Demo Song menu on the left.
The SP7 has an automatic power saving feature (Global mode / Auto Power Off) that can automati-
cally power off the SP7 after a designated period of inactivity, in order to conserve electricity.
Sound Test
1.
2.
Engine firmware update1.
Connect the SP7 and computer with a USB cable (A to B type). The USB port is located on the
rear panel.
While holding down the [DECREASE -] and [INCREASE +] buttons at the same time, turn on the
SP7, wait for about 1 to 2 seconds, then release the [DECREASE -] and [INCREASE +] buttons.
After confirming that the [DECREASE -] and [INCREASE +] button LEDs are lit, run the
SP7Update.exe program on the computer.
Check that [Kurzweil SP (Bootloader)] is displayed in the Device item.
Press the [Start Program] button to start the update.
When the update is complete, a completion message will appear at the bottom of the screen.
Exit the program and reboot the SP7 to complete the installation.
To prevent conflicts with the existing firmware, perform a “Hard Reset” (Global mode / Info
page).
If a problem occurs during firmware installation, try to repeat the installation process above again.
1)
2)
3)
4)
5)
6)
7)
8)
9)
Auto Power On/Off Function
Check out Kurzweil's website (www.kurzweil.com) for new updates. You can check the current
firmware version installed on your SP7 on the Info page of Global Mode.
Firmware update

Specyfikacje produktu

Marka: Kurzweil
Kategoria: klawiatura
Model: SP7

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kurzweil SP7, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje klawiatura Kurzweil

Kurzweil

Kurzweil SP1 Instrukcja

7 Października 2024
Kurzweil

Kurzweil SP4S-8 Instrukcja

22 Września 2024
Kurzweil

Kurzweil K2700 Instrukcja

22 Września 2024
Kurzweil

Kurzweil PC3 Instrukcja

22 Września 2024
Kurzweil

Kurzweil PC3A8 Instrukcja

22 Września 2024
Kurzweil

Kurzweil K2600 Instrukcja

22 Września 2024
Kurzweil

Kurzweil K2600R Instrukcja

21 Września 2024
Kurzweil

Kurzweil PC4-7 Instrukcja

21 Września 2024
Kurzweil

Kurzweil KP-120A Instrukcja

21 Września 2024
Kurzweil

Kurzweil SP7 Instrukcja

21 Września 2024

Instrukcje klawiatura

Najnowsze instrukcje dla klawiatura

Speed-Link

Speed-Link VIRTUIS Instrukcja

14 Października 2024
Speed-Link

Speed-Link ATMOS Instrukcja

13 Października 2024
Targus

Targus Thura GXT 860 Instrukcja

13 Października 2024
Roland

Roland Fantom G8 Instrukcja

11 Października 2024
Yamaha

Yamaha Portatone PSR-160 Instrukcja

10 Października 2024
Roland

Roland E-30 Instrukcja

10 Października 2024
Yamaha

Yamaha Electone B-45 Instrukcja

10 Października 2024
Urban Factory

Urban Factory GWK01UF Instrukcja

9 Października 2024
Trust

Trust 24645 Instrukcja

9 Października 2024
Goldtouch

Goldtouch Elite GTE-08899 Instrukcja

9 Października 2024