Instrukcja obsługi Kramer SID-H

Kramer przedłużacz AV SID-H

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kramer SID-H (2 stron) w kategorii przedłużacz AV. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

The Kramer SID-H HDMI Step-In Commander

Congratulations on purchasing your Kramer DigiTOOLS

® SID-H HDMI Step-In

Commander which is ideal for boardrooms and presentation rooms.

The Kramer is an HDMI and unbalanced stereo audio remote device that is used SID-H

to remotely take control of a compatible switcher, for example, the Kramer . VP-81SID

The commander is HDCP compliant and does not need a power adapter if located within

50m (1 ft) of the switcher. 64

Figure 1 Table 1 and deﬁne the . SID-H HDMI Step-In Commander

Figure 1 SID-H HDMI Step-In Commander Front and Rear Panel :

Table 1 SID-H HDMI Step-In Commander Front and Rear Panel Features :

Feature

Function

AUDIO INPUT 3.5mm Mini Jack

Connect to the unbalanced stereo audio source

HDMI INPUT DisplayPort Connector

Connect to the HDMI video source

STEP Butto IN n

Press to switch the input to this remote control commander. The

button lights when active

ON LED

Lights green when the unit receives power

LINE OUT Twisted Pair RJ-45

Connector

Connect to the TP input of a compatible switcher (for example, the

VP-81SID) using CAT 6 or higher specification cable

Remote Switch Terminal Block

Connections (pins 2 and 3)

Connect to the remote step-in switch

12V DC Power Connector

Connect to the power adapter

Remote LED Terminal Block

Connections (pins 1 and 3)

Connect to the remote LED (observe correct polarity. Connect pin 1

to the LED anode and pin 3 to the cathode)

Figure 2 illustrates how to connect the to a source switcher, and remote switch SID-H ,

and LED .

Figure 2 SID-H Wiring Connections :

To connect the SID-H as illustrated in : Figure 2

1. Connect the HDMI video source (for example, a laptop graphics source) to the

HDMI INPUT connector on the front panel of the SID-H.

2. Connect the unbalanced stereo audio source (for example, a laptop graphics source)

to the 3.5mm mini jack AUDIO INPUT connector on the front of the . SID-H

3. Using STP cable, connect the LINE OUT RJ-45 TP connector on the rear panel of

the to the required input on the rear panel of the (up to 50m SID-H VP-81SID

away).

4. Optional Connect the terminal block on the rear of the to the remote —SID-H

switch and LED.

Note: The LED supply includes a current limiting resistor and is designed to work

with any standard LED.

5. Connect the power adapter to the 12V DC connector on the rear of the and SID-H

to the mains electricity (if the distance exceeds 50m (1 ft) from the switcher). 64

Technical Speciﬁcations

Technical speciﬁcations of the are shown in SID-H Table 2.

Table 2: Technical speciﬁcations1of the SID-H HDMI Step-In Commander

INPUTS:

Video: HDMI

Audio: 3.5mm mini jack

OUTPUT:

TP on an RJ-45 Ethernet connector

STEP-IN COMMANDER

DISTANCE:

50m ( 416 ft)

POWER CONSUMPTION:

12V DC, 360mA

OPERATING

TEMPERATURE:

0° to +40°C (32° to 104°F)

STORAGE

TEMPERATURE:

–40° to +70°C (–40° to 158°F)

HUMIDITY:

10% to 90%, RHL non-condensing

DIMENSIONS:

12.1cm x 7cm x 2.4cm (4.7” x 2.76” x 0.94”) W, D, H

WEIGHT:

0.3kg (0.66lbs) approx

ACCESSORIES:

Power supply

1 ils are subject to change without notice Product deta

SID-H

HDMI Step-In Commander

Installation Instructions

For the latest information on our products and a list of Kramer distributors,

visit our Web site at www.kramerelectronics.com

P/N:

2900- 000709

Rev:

Kramer Electronics, Ltd.

Web site: www.kramerelectronics.com

E-mail: info@kramerel.com

P/N: 2900-000709 REV 4

Specyfikacje produktu

Marka:	Kramer
Kategoria:	przedłużacz AV
Model:	SID-H
Kolor produktu:	Czarny
Napięcie wejściowe AC:	12 V
Waga produktu:	300 g
Gniazdko wyjścia DC:	Tak
Model:	Nadajnik AV
Wymiary produktu (SxGxW):	120 x 70 x 24 mm
Maks. rozdzielczość:	- px
Wejście audio:	1
HDMI in:	1
Obsługiwane typy kabli:	Cat6, Cat7
Wyjścia RJ-45:	1