Instrukcja obsługi Korg Kaoss Pad Mini 2S

Korg Sprzęt DJ-ski Kaoss Pad Mini 2S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Korg Kaoss Pad Mini 2S (16 stron) w kategorii Sprzęt DJ-ski. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

4015-2 Yanokuchi, Inagi-city, Tokyo 206-0812 Japan

 2006 KORG INC.

Connections

LINE IN LINE OUT

DC4.5V

MIXER

CD PLAYER

Option: AC ADAPTER

PHONES

DJ MIXER

LINE IN

MP3 PLAYER

PHONES

Liaisons

Anschlüsse



Precautions

Location

Using the unit in the following locations can result in a

malfunction.

• In direct sunlight

• Locations of extreme temperature or humidity

• Excessively dusty or dirty locations

• Locations of excessive vibration

• Close to magnetic fields

Power supply

Please connect the designated AC adapter to an AC

outlet having the correct voltage. Do not connect it to

an AC outlet having a voltage other than that speci-

fied for your unit.

Interference with other electrical devices

Radios and televisions placed nearby may experience

reception interference. Operate this unit at a suitable

distance from radios and televisions.

Handling

To avoid breakage, do not apply excessive force to

the switches or controls.

Care

If the exterior becomes dirty, wipe it with a clean, dry

cloth. Do not use liquid cleaners such as benzene or

thinner, or cleaning compounds or flammable polishes.

Keep this manual

After reading this manual, please keep it for later ref-

erence.

Keeping foreign matter out of your equipment

Never set any container with liquid in it near this equip-

ment. If liquid gets into the equipment, it could cause

a breakdown, fire, or electrical shock.

Be careful not to let metal objects get into the equip-

ment. If something does slip into the equipment, un-

plug the AC adapter from the wall outlet. Then contact

your nearest Korg dealer or the store where the equip-

ment was purchased.

* Company names, product names, and names of

formats etc. are the trademarks or registered trade-

marks of their respective owners.

THE FCC REGULATION WARNING (for U.S.A.)

This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pur-

suant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harm-

ful interference to radio communications. However,

there is no guarantee that interference will not oc-

cur in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try

to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

Unauthorized changes or modification to this sys-

tem can void the user’s authority to operate this

equipment.

CE mark for European Harmonized Standards

CE mark which is attached to our company’s prod-

ucts of AC mains operated apparatus until Decem-

ber 31, 1996 means it conforms to EMC Directive

(89/336/EEC) and CE mark Directive (93/68/EEC).

And, CE mark which is attached after January 1,

1997 means it conforms to EMC Directive (89/336/

EEC), CE mark Directive (93/68/EEC) and Low Volt-

age Directive (73/23/EEC).

Also, CE mark which is attached to our company’s

products of Battery operated apparatus means it

conforms to EMC Directive (89/336/EEC) and CE

mark Directive (93/68/EEC).

IMPORTANT NOTICE TO CONSUMERS

This product has been manufactured according to

strict specifications and voltage requirements that

are applicable in the country in which it is intended

that this product should be used. If you have pur-

chased this product via the internet, through mail

order, and/or via a telephone sale, you must verify

that this product is intended to be used in the coun-

try in which you reside.

WARNING: Use of this product in any country other

than that for which it is intended could be danger-

ous and could invalidate the manufacturer’s or

distributor’s warranty.

Please also retain your receipt as proof of purchase

otherwise your product may be disqualified from the

manufacturer’s or distributor’s warranty.

Thank you for purchasing the KAOSS PAD mini-

KP Dynamic Effect Processor. For trouble-free

enjoyment of the mini-KP’s fullest potential,

please read this manual carefully and use the

mini-KP only as directed.

Parts of the mini-KP

PROGRAM/BPM knob

PEAK indicator

Display

LINE IN jacks LINE OUT jacks

DC jack

VOLUME

PHONES jack

Touch pad

HOLD button

HOLD indicator

ON/STANDBY switch MEMORY B button

MEMORY A button

TAP/BPM button

Replacing the batteries

The display will indicate “Lo” when the batteries

are running low. Please replace the batteries as

soon as possible.

You must turn off the power switch before re-

placing the batteries.

The included batteries are provided so that you

can verify that the unit operates correctly, and may

have a shorter lifespan than expected.

Use only alkaline batteries.

If the batteries become unusable, remove them

immediately. You should also remove the batteries if

you won't be using the unit for an extended time.

1. On the bottom panel, slide the battery case

cover in the direction of the arrow to open it.

2. Install four AA batteries. Make sure that the

batteries are in-

serted in the cor-

rect polarity (+, -).

3. Close the battery

case cover.

Turning the power on/off

Turning the power on

Set the ON/STANDBY switch to the ON position;

this turns the power on.

Turning the power off

Set the ON/STANDBY switch to the STANDBY

position; this will turn the power off.

If you’re using the mini-KP on battery power,

don’t forget to turn the power off when you are done

using it.

Connection setting

Hold down the MEMORY A button and press the

B button. Use the PROG/VALUE knob to select

“dir” (direct) or “snd” (send).

Choose the “dir” setting if you are connecting an

instrument or audio device directly to the mini-

KP (as in the diagram above). Choose the “snd”

setting if the mini-KP will be connected to the

effect send and return jacks of your mixer or

other device.

To return to the normal play mode, once again

hold down the MEMORY A button and press the

B button. The mini-KP will also return to the nor-

mal play mode (program selection state) after

about three seconds if no additional setting op-

erations are performed.

This setting will be remembered even when the

power is turned off.

About the input level

The PEAK indicator will light red if the input sig-

nal level is too high. In this case, reduce the

output volume of the device that's connected to

the mini-KP.

Use the VOLUME knob on the front to adjust the

headphone volume.

Operation

Operating the touch pad

You can control the sound by rubbing or tapping

your finger on the touch pad. Each axis (X, Y) will

provide realtime control of a different effect pa-

rameter.

Specyfikacje produktu

Marka:	Korg
Kategoria:	Sprzęt DJ-ski
Model:	Kaoss Pad Mini 2S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Korg Kaoss Pad Mini 2S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Sprzęt DJ-ski Korg

Korg DT-10 Instrukcja

7 Października 2024

Korg OT-120 Instrukcja

27 Września 2024

Korg DTR-2000 Instrukcja

26 Września 2024

Korg CM-200 Instrukcja

23 Września 2024

Korg DTR-1000 Instrukcja

17 Września 2024

Korg A4501 Instrukcja

15 Września 2024

Korg Pitchclip Instrukcja

14 Września 2024

Korg AX1G Instrukcja

14 Września 2024

Korg PitchCrow-G Instrukcja

14 Września 2024

Korg KM-402 Instrukcja

11 Września 2024

Instrukcje Sprzęt DJ-ski

Najnowsze instrukcje dla Sprzęt DJ-ski

Festo CPX-E-CEC-M1 Instrukcja

9 Października 2024

BeamZ StarFuzer Instrukcja

9 Października 2024

Chauvet Freedom Flex Stick X4 Instrukcja

8 Października 2024

Yamaha MW10 Instrukcja

8 Października 2024

Vocopro KRS-3808 PRO Instrukcja

7 Października 2024

Nektar CS12 Instrukcja

5 Października 2024

Ortofon OM 5S Instrukcja

5 Października 2024

Vocopro UMH-5805 Instrukcja

5 Października 2024

UDG Gear Urbanite Instrukcja

5 Października 2024

Line 6 POD Express Instrukcja

4 Października 2024