Instrukcja obsługi Konig SAS-IPCAM115


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Konig SAS-IPCAM115 (23 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/23
SAS-IPCAM115
MANUAL
IP CAMERA
ENGLISH
2
Introduction:
The plug-and-play IP camera enables people to watch over their properties. It is easy to set
up and requires no complex conguration. The free uCare Cam app, available on Google Play
and the Apple App Store, facilitates remote viewing on smartphones or other mobile devices
anytime, anywhere. If it detects any motion, it will send out an e-mail or app notication.
Footage can be played back at all times.
• We recommend that you read this manual before installing/using this product.
• Keep this manual in a safe place for future reference.
Safety precautions:
This product should ONLY be opened by an authorized technician when service is required.
Disconnect the product from mains and other equipment if a problem should occur. Do not
expose the product to water or moisture.
Packaging content:
1x IP camera
1x Camera mount
1x AC/DC adapter
1x Quick start guide
1x CD with complete manual
System requirements:
• Device running on iOS 5.0 and above
• Device running on Android 4.0 and above
• WiFi Router
Table of contents
• Introduction:
• Safety precautions:
• Packaging content:
• System requirements:
• Product description:
• User instructions:
• Maintenance:
• Warranty:
• Disclaimer:
• Disposal:
ENGLISH
3
Product description:
1. Mount
2. Microphone
3. Antenna
4. IR LED for night vision
5. Camera lens
6. Light intensity sensor
7. WPS/RESET button (behind rubber cover)
8. 12V power cord
User instructions:
A. Hardware Installation
1. Please nd a location to install uCare Cam that is within good WiFi signal reach of your
home Router.
2. If you plan to hang the uCare Cam, you can use the included mounting kit found in inside
box.
3. If the included power cable does not have sucient length to reach power outlet, please
purchase an extender cable from your local electronics store.
4. Connect the camera power adapter.
Warning:
Please use the power adapter included with your camera to avoid damage to
the camera.
When the camera powers up, the status LED will be Green for about 15 seconds before
ashing Red. If there is no Red LED ashing, please unplug the power cord, wait 5 seconds,
then re-connect the power again. It will take about 60 seconds for the uCare Cam to nish
starting up. The status LED should alternate between Red and Green. If the status LED does
not ash Red and Green, please press the WPS/REST button at the back of uCare Cam for
10seconds.


Specyfikacje produktu

Marka: Konig
Kategoria: Kamera monitorująca
Model: SAS-IPCAM115

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Konig SAS-IPCAM115, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Kamera monitorująca Konig

Konig

Konig SEC-TRCAM30 Instrukcja

23 Września 2024
Konig

Konig SAS-ARC10 Instrukcja

20 Września 2024
Konig

Konig SAS-CAM4100 Instrukcja

19 Września 2024
Konig

Konig SEC-CAM355 Instrukcja

12 Września 2024
Konig

Konig SAS-APW10 Instrukcja

12 Września 2024
Konig

Konig SAS-DVRODR31 Instrukcja

11 Września 2024
Konig

Konig SAS-CAM3100 Instrukcja

10 Września 2024
Konig

Konig SEC-CAM901 Instrukcja

9 Września 2024
Konig

Konig SEC-DVRSG10 Instrukcja

8 Września 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca