Instrukcja obsługi Konica Minolta bizhub 283

Konica Minolta drukarka bizhub 283

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Konica Minolta bizhub 283 (112 stron) w kategorii drukarka. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/112

User’s Guide [Advanced Function Operations]

bizhub 423/363/283/223 contents-1

Table of contents

1 Introduction

1.1 Welcome .......................................................................................................................................... 1-2

1.1.1 User's guides ..................................................................................................................................... 1-2

1.1.2 User's Guide ...................................................................................................................................... 1-3

1.2 Use conditions................................................................................................................................. 1-4

1.3 Conventions used in this manual .................................................................................................. 1-5

1.3.1 Symbols used in this manual ............................................................................................................. 1-5

To use this machine safely................................................................................................................. 1-5

Procedural instruction........................................................................................................................ 1-5

Key symbols....................................................................................................................................... 1-6

1.3.2 Original and paper indications ........................................................................................................... 1-6

Original and paper sizes .................................................................................................................... 1-6

Original and paper indications ........................................................................................................... 1-6

2 Overview

2.1 Overview of each function ............................................................................................................. 2-2

2.1.1 Supported function table ................................................................................................................... 2-2

2.1.2 Key layout after the function is expanded ......................................................................................... 2-2

2.1.3 Functions available with expanded functions.................................................................................... 2-3

3 Assigning Application Keys

3.1 Overview .......................................................................................................................................... 3-2

3.1.1 Key layout after the function is expanded ......................................................................................... 3-2

3.1.2 [Application Menu] ............................................................................................................................. 3-3

3.2 Customizing the application keys 1 and 2 .................................................................................... 3-4

3.2.1 [Application Key Settings].................................................................................................................. 3-4

4 Web Browser Function

4.1 Overview .......................................................................................................................................... 4-2

4.1.1 Available operations with the Web Browser function ........................................................................ 4-2

4.1.2 Specifications..................................................................................................................................... 4-2

Specifications for Web Browser ........................................................................................................ 4-2

Restrictions on Flash Player .............................................................................................................. 4-3

4.2 Displaying Web Browser ................................................................................................................ 4-4

4.3 Configuring settings to enable use of the Web browser............................................................. 4-5

4.3.1 Restricting the use of the Web browser in the MFP .......................................................................... 4-5

[Web Browser Setting] ....................................................................................................................... 4-5

4.3.2 Restricting the use of Web browser for each user ............................................................................ 4-6

[Function Permission]......................................................................................................................... 4-6

4.3.3 Restricting the use of local contents ................................................................................................. 4-7

[Web browser contents access]......................................................................................................... 4-7

4.4 Basic operation ............................................................................................................................... 4-8

4.4.1 Screen components........................................................................................................................... 4-8

4.4.2 Operating instructions........................................................................................................................ 4-9

Operation using the Touch Panel ...................................................................................................... 4-9

Operation using the Keypad .............................................................................................................. 4-9

4.4.3 How to enter text ............................................................................................................................. 4-10

Entering text..................................................................................................................................... 4-10

4.4.4 Screen display mode ....................................................................................................................... 4-10

[Normal]............................................................................................................................................ 4-10

bizhub 423/363/283/223 contents-2

[Just-Fit Rendering].......................................................................................................................... 4-10

[Smart-Fit Rendering]....................................................................................................................... 4-10

4.4.5 Specifying speaker volume.............................................................................................................. 4-11

4.5 Toolbar ........................................................................................................................................... 4-12

4.5.1 Description of the toolbar ................................................................................................................ 4-12

4.5.2 [Favorites] - [List].............................................................................................................................. 4-13

List of favorites................................................................................................................................. 4-13

4.5.3 [Favorites] - [Add]............................................................................................................................. 4-13

4.5.4 [Address] .......................................................................................................................................... 4-14

4.5.5 [History] ............................................................................................................................................ 4-14

[Display History] ............................................................................................................................... 4-14

4.5.6 [Print]................................................................................................................................................ 4-15

4.5.7 [Menu] .............................................................................................................................................. 4-15

4.6 Configuring the Web Browser settings....................................................................................... 4-16

4.6.1 [Page Operation] .............................................................................................................................. 4-16

4.6.2 [Display]............................................................................................................................................ 4-16

4.6.3 [Manage windows] ........................................................................................................................... 4-17

4.6.4 [Settings] .......................................................................................................................................... 4-17

4.7 Printing, displaying, or saving a document file .......................................................................... 4-18

4.7.1 Printing a document file................................................................................................................... 4-18

4.7.2 Displaying a document file............................................................................................................... 4-19

4.7.3 Saving a document file .................................................................................................................... 4-20

4.8 Uploading a document file ........................................................................................................... 4-21

4.8.1 Restrictions ...................................................................................................................................... 4-21

4.8.2 Uploading a scanned document file ................................................................................................ 4-21

4.8.3 Uploading a document file in a User Box ........................................................................................ 4-22

5 PageScope Web Connection (Web Browser Function)

5.1 Using PageScope Web Connection .............................................................................................. 5-2

5.1.1 Prior check......................................................................................................................................... 5-2

5.1.2 How to access ................................................................................................................................... 5-2

5.2 Screen components........................................................................................................................ 5-3

5.3 Logging in and logging out ............................................................................................................ 5-4

5.3.1 Login .................................................................................................................................................. 5-4

5.3.2 Logout................................................................................................................................................ 5-4

5.4 Using the User Box function ........... ............................................................................ ................... 5-5

5.4.1 Open User Box .................................................................................................................................. 5-5

[Open User Box]................................................................................................................................. 5-5

[File List]............................................................................................................................................. 5-6

5.4.2 Document operations ........................................................................................................................ 5-7

Printing a document........................................................................................................................... 5-7

Deleting a document.......................................................................................................................... 5-9

6 Image Panel

6.1 Overview .......................................................................................................................................... 6-2

Features ............................................................................................................................................. 6-2

6.2 Displaying the Image Panel............................................................................................................ 6-3

6.3 Operating Image Panel................................................................................................................... 6-4

6.3.1 Screen components........................................................................................................................... 6-4

6.3.2 General operation .............................................................................................................................. 6-5

6.3.3 Reading a document.......................................................................................................................... 6-7

Scanning a document........................................................................................................................ 6-7

Retrieving from User Box................................................................................................................... 6-8

Retrieving a document from an external memory.............................................................................. 6-9

Using data saved in a cellular phone or PDA .................................................................................. 6-10

bizhub 423/363/283/223 contents-3

6.3.4 Editing the document....................................................................................................................... 6-11

[Preview]........................................................................................................................................... 6-11

[Document/Page] - [Edit Document] ................................................................................................ 6-11

[Document/Page] - [Combine Documents]...................................................................................... 6-12

[Document/Page] - [Document Settings] ......................................................................................... 6-13

[Return to Scan Dest.]...................................................................................................................... 6-13

6.3.5 Specifying a destination................................................................................................................... 6-14

Printing............................................................................................................................................. 6-14

Specifying destinations.................................................................................................................... 6-15

Saving a document in an external memory ..................................................................................... 6-15

6.3.6 Checking the send tray .................................................................................................................... 6-16

Send Tray......................................................................................................................................... 6-16

[Check TX Tray]................................................................................................................................ 6-16

6.3.7 Sending data from a cellular phone or PDA .................................................................................... 6-17

6.4 Registering a photo in the address book ................................................................................... 6-18

6.4.1 Specifications of photo data............................................................................................................ 6-18

6.4.2 Registering photo data .................................................................................................................... 6-19

6.5 Customizing Image Panel ............................................................................................................ 6-21

6.5.1 Customizing the Read Data area..................................................................................................... 6-21

6.5.2 Customizing the Document Destination area .................................................................................. 6-22

6.5.3 Deleting a registered shortcut icon.................................................................................................. 6-23

7 PDF Processing Function

7.1 Overview .......................................................................................................................................... 7-2

Available operations with the PDF processing function .................................................................... 7-2

7.2 PDF document properties .............................................................................................................. 7-3

7.3 Encrypting PDF document and adding digital signature ............................................................ 7-4

7.3.1 Password-based encryption.............................................................................................................. 7-4

7.3.2 Digital ID-based encryption ............................................................................................................... 7-5

7.4 Direct Print....................................................................................................................................... 7-7

8 Searchable PDF function

8.1 Overview .......................................................................................................................................... 8-2

Precautions when creating searchable PDF files .............................................................................. 8-2

Recognizable character size .............................................................................................................. 8-2

8.2 Configuring the OCR operation setting ........................................................................................ 8-3

[OCR Operation Setting] .................................................................................................................... 8-3

8.3 Configuring the searchable PDF setting....................................................................................... 8-4

9 My Panel Function

9.1 Overview .......................................................................................................................................... 9-2

9.1.1 Available operations with My Panel ................................................................................................... 9-2

Customizable items ........................................................................................................................... 9-2

Functions available by linking to the Web browser ........................................................................... 9-2

Functions available with Image Panel................................................................................................ 9-3

9.1.2 My Panel acquisition procedure ........................................................................................................ 9-3

9.1.3 Restrictions on using the My Panel function ..................................................................................... 9-3

9.2 Displaying My Panel........................................................................................................................ 9-4

9.2.1 Main Menu ......................................................................................................................................... 9-4

9.2.2 Displaying Main Menu........................................................................................................................ 9-4

9.3 Customizing My Panel .................................................................................................................... 9-5

9.3.1 [My Panel Settings] ............................................................................................................................ 9-5

9.3.2 Displaying [My Panel Settings]........................................................................................................... 9-5

9.3.3 [Language Setting] ............................................................................................................................. 9-6

9.3.4 [Measurement Unit Settings].............................................................................................................. 9-6

9.3.5 [Copier Settings] ................................................................................................................................ 9-7

1Introduction

bizhub 423/363/283/223 1-2

1.1 Welcome

1 Introduction

1.1 Welcome

Thank you for purchasing this machine.

This User's Guide describes the overview and usage of functions available by registering an optional license

kit to this machine, and functions available by connecting it to an application. To use each function effectively,

please read this User's Guide.

1.1.1 User's guides

Printed manual Overview

[Quick Guide Copy/Print/Fax/Scan/Box Oper-

ations]

This manual describes operating procedures and the

functions that are most frequently used in order to ena-

ble you to begin using this machine immediately.

This manual contains notes and precautions that should

be followed to ensure safe usage of this machine.

Please be sure to read this manual before using this ma-

chine.

User's guide CD manuals Overview

[User's Guide Copy Operations] This manual describes details on copy mode operations

and the settings of this machine.

• Specifications of originals and copy paper

• Copy function

• Maintaining this machine

• Troubleshooting

[User's Guide Enlarge Display Operations] This manual describes details on operating procedures

of the enlarge display mode.

• Copy function

• Scanning function

• G3 fax function

• Network fax function

[User's Guide Print Operations] This manual describes details on printer functions.

• Printer function

• Setting the printer driver

[User's Guide Box Operations] This manual describes details on user box functions.

• Saving data in user boxes

• Retrieving data from user boxes

• Transferring and printing data from user boxes

[User's Guide Network Scan/Fax/Network Fax

Operations]

This manual describes details on transmitting scanned

data.

• E-mail TX, FTP TX, SMB TX, Save in User Box, Web-

DAV TX, Web Services

• G3 fax

• IP Address Fax, Internet Fax

[User's Guide Fax Driver Operations] This manual describes details on the fax driver function

that transmits faxes directly from a computer.

• PC-FAX

[User's Guide Network Administrator] This manual describes details on setting methods for

each function using the network connection.

• Network settings

• Settings using PageScope Web Connection

bizhub 423/363/283/223 1-3

1.1 Welcome

1.1.2 User's Guide

This User's Guide is intended for users ranging from those using this machine for the first time to administra-

tors.

It describes basic operations, functions that enable more convenient operations, simple troubleshooting op-

erations, and various setting methods of this machine.

Note that basic technical knowledge about the product is required to enable users to perform troubleshooting

operation. Limit your troubleshooting operations to the areas explained in this manual.

Should you experience any problems, please contact our service representative.

[User's Guide Advanced Function Operations] This manual describes details on functions that become

available by registering the optional license kit and by

connecting to an application.

• Web browser function

• Image panel

• PDF Processing Function

• Searchable PDF

• My panel and My address functions

[Trademarks/Copyrights] This manual describes details on trademarks and copy-

rights.

• Trademarks and copyrights

User's guide CD manuals Overview

bizhub 423/363/283/223 1-4

1.2 Use conditions

Enabling i-Option LK-101 v2 i-Option LK-103 v2 or allows you to access the Internet from the Control Pan-

el of the MFP.

Users will bear a responsibility for contents accessed, downloaded, and uploaded using Web Browser in the

MFP, and other communicated contents. Users shall conform to the company rules and laws of the country

where this machine is used.

Konica Minolta Business Technologies, Inc. and its group businesses will not bear any responsibility for use

of the Internet by users.

i-Option LK-103 v2 may not be available depending on the area. For details, contact your service represent-

ative.

bizhub 423/363/283/223 1-5

1.3 Conventions used in this manual

1.3.1 Symbols used in this manual

Symbols are used in this manual to express various types of information.

The following describes each symbol related to correct and safe usage of this machine.

To use this machine safely

7 7 WARNING

-This symbol indicates that a failure to heed the instructions may lead to death or serious injury.

7 7 CAUTION

-This symbol indicates that negligence of the instructions may lead to mishandling that may cause injury

or property damage.

NOTICE

This symbol indicates a risk that may result in damage to this machine or documents.

Follow the instructions to avoid property damage.

Procedural instruction

0This check mark indicates an option that is required in order to use conditions or functions that are pre-

requisite for a procedure.

1This format number "1" represents the first step.

2This format number represents the order of serial steps.

%This symbol indicates a supplementary explanation of a pro-

cedural instruction.

%This symbol indicates transition of the Control Panel to access a desired menu item.

This symbol indicates a desired page.

The operation pro-

cedures are de-

scribed using

illustrations.

bizhub 423/363/283/223 1-6

1.3 Conventions used in this manual

d Reference

This symbol indicates a reference.

View the reference as required.

Key symbols

[ ]

Key names on the touch panel or computer screen, or a name of user's guide are indicated by these brackets.

Bold text

This presents a key name, part name, product name or option name on the control panel.

1.3.2 Original and paper indications

Original and paper sizes

The following explains the indication for originals and paper described

in this manual.

When indicating the original or paper size, the Y side represents the

width and the X side the length.

Original and paper indications

w indicates the paper size with the length (X) being longer than the

width (Y).

v indicates the paper size with the length (X) being shorter than the

width (Y).

2Overview

bizhub 423/363/283/223 2-3

2.1 Overview of each function

2.1.3 Functions available with expanded functions

The following describes the overview of each function. For details, refer to the reference described below.

Reference

-When the accounting management device is installed in the MFP, Image Panel cannot be used.

Function Overview Refer-

ence

Web Browser This function can be used by registering i-Option LK-101 v2 or i-Option

LK-103 v2 in the MFP.

By using the Control Panel of the MFP connected to the network, you

can access to the Internet or intranet and display or print the contents.

Also, through a Web browser, you can operate PageScope Web Con-

nection of the MFP connected to the network and use documents saved

in User Boxes.

p. 4-2

p. 5-2

Image Panel This function can be used by registering i-Option LK-101 v2 or i-Option

LK-103 v2 in the MFP.

Image Panel is a new intuitive and easy-to-understand panel interface.

This panel helps you easily image the entire operation flow from loading

to sending a document.

You can add photo data to the one-touch destinations using Page-

Scope Web Connection. The registered photo data is applied to the ad-

dress list of Image Panel.

p. 6-2

PDF processing This function can be used by registering i-Option LK-102 or i-Option

LK-103 v2 in the MFP.

Performs password- or digital ID-based encryption of PDF, adds a digital

signature, and configures property settings when distributing docu-

ments in the PDF format using the scan or User Box function.

p. 7-2

Searchable PDF This function is available when i-Option LK-105 is registered with the

MFP.

You can create a text searchable PDF file by pasting transparent text

data on the area of a document in which characters are recognized

through an OCR process.

You can create a searchable PDF file when saving or sending an original

in the PDF format using the scan or User Box functions.

p. 8-2

My Panel This function is used in connection with the PageScope My Panel Man-

ager.

Available by centrally managing the environment of the Control Panel

customized by the user depending on the application (My Panel), and

then obtaining My Panel on the MFP selected by the user.

p. 9-2

My Address This function is used in connection with the PageScope My Panel Man-

ager.

Available by centrally managing the personal address book (My Address

Book) by the server, and then obtaining My Address Book on the MFP

selected by the user.

p. 10-2

3Assigning Application Keys

bizhub 423/363/283/223 3-2

3.1 Overview

3 Assigning Application Keys

3.1 Overview

The following describes the key layout and [Application Menu] of the Control Panel.

3.1.1 Key layout after the function is expanded

Adding the Web Browser function, Image Panel function or My Panel function allows User Box to function

as Application Menu, and Fax/Scan and Copy as application keys.

Reference

-The Web Browser and Image Panel functions can be used by registering i-Option LK-101 v2 or i-Op-

tion LK-103 v2 in the MFP.

-The My Panel function is used in connection with the PageScope My Panel Manager.

No. Name Description

1 Application menu Press this key to display the [Application Menu]. You cannot assign a dif-

ferent function to this key.

If a function is added, attach a Application Menu sticker (included in the

Upgrade Kit UK-203) to change the key name on the Control Panel.

For details, refer to page 3-3.

2 Application key 1 The fax/scan function is assigned by default. The administrator can assign

a different function to this key.

If the function assigned to the key is changed, attach a sticker describing

the new function (included in the Upgrade Kit UK-203) to change the key

name on the Control Panel.

For details on assigning a function, refer to page 3-4.

21 3

bizhub 423/363/283/223 3-4

3.2 Customizing the application keys 1 and 2

To fit the use status, the function to be assigned to the application keys 1 and 2 can be changed.

3.2.1 [Application Key Settings]

To assign a function to the application keys 1 and 2, use [Application Key Settings].

1Press Utility/Counter to display [Utility].

2Press [Administrator Settings].

3Enter the administrator password, and then press [OK].

4Press [System Settings].

5In [System Settings] (2/2), press [Application Key Settings].

6Select an application key ([Key 1] or [Key 2]) to which you assign a function.

bizhub 423/363/283/223 3-5

3.2 Customizing the application keys 1 and 2

7Select a function to be assigned.

8Press [OK].

The function is assigned to the application key.

4Web Browser Function

bizhub 423/363/283/223 4-2

4.1 Overview

4 Web Browser Function

4.1 Overview

The Web Browser function prints, displays, and saves contents on the Internet or intranet by accessing them

from the Control Panel of the MFP connected to the network.

Reference

-This function can be used on the MFP with i-Option LK-101 v2 or i-Option LK-103 v2 registered.

4.1.1 Available operations with the Web Browser function

The Web Browser function allows you to perform the following operations.

-Displaying and printing Web contents on the Internet or intranet.

-Displaying, printing, and saving a document file on the Internet or intranet.

-Uploading a scanned document file or a document file saved in a User Box to a server on the Internet

or intranet.

-Sharing documents in the User Box of MFPs on the network using PageScope Web Connection.

-When the My Panel function is available, you can personalize the user operation environment of the

Web browser by linking the Web browser with My Panel.

d Reference

For details on using PageScope Web Connection from the Control Panel, refer to page 5-2.

For details on My Panel, refer to page 9-2.

4.1.2 Specifications

Specifications for Web Browser

The following shows the major specifications of the Web Browser installed in the MFP.

Item Specifications

Browser engine NetFront

Supported protocols HTTP (HTTP/0.9, 1.0, 1.1), HTTPS, TCP/IP

Supported markup

language

HTML 4.01, XHTML 1.1/Basic

Supported style sheet Part of CSS1 and 2

Supported script lan-

guage

Part of JavaScript 1.5, ECMAScript 3rd Edition, Ajax (limited to the scope sup-

ported by JavaScript)

Supported DOM Part of Level 1 and 2

Supported format JPEG, BMP, PNG, GIF, animation GIF, PDF, Flash 7.0 and earlier

Supported SSL/TLS

versions

SSL 2.0, SSL 3.0, TLS 1.0

Supported character

codes

Japanese (Shift_JIS), Japanese (ISO-2022-JP), Japanese (EUC-JP), Chinese

Simplified (GB2312), Chinese Traditional (Big5), Western European (ISO-8859-

1), Unicode (UTF-8)

Display mode Normal, Just-Fit Rendering, Smart-Fit Rendering

PDF viewer Adobe® Reader® LE

Flash player Adobe® Flash® Player 7

bizhub 423/363/283/223 4-4

4.2 Displaying Web Browser

In [Application Menu], press [Web Browser]. The page specified as the home is displayed.

Reference

-If a login user is using the Web browser linked to My Panel and the user presses [Web Browser], the

Web browser setting and information related to the user is downloaded to the MFP from the server. If

the user has specified a personal home page, that page is displayed.

-When the Web browser starts, you can specify whether to display the home page or the last page that

was visited. For details, refer to page 4-17.

d Reference

For details on the [Application Menu], refer to page 3-3.

For details on My Panel, refer to page 9-2.

bizhub 423/363/283/223 4-5

4.3 Configuring settings to enable use of the Web browser

If you do not want to allow use of the Web browser in the MFP, you can restrict its use without disabling the

license kit. Also, you can restrict use of the Web browser for each user.

4.3.1 Restricting the use of the Web browser in the MFP

If you do not want to allow use of the Web browser, you can restrict its use without disabling the license kit.

[Web Browser Setting]

1Press Utility/Counter to display [Utility].

2Press [Administrator Settings].

3Enter the administrator password, and then press [OK].

4Press [Network Settings].

5In [Network Settings] (2/2), press [Web Browser Setting].

6Select [Invalid], and then press [OK].

Reference

-If [Web Browser Setting] is set to [Invalid], [Web Browser] is hidden in the [Application Menu].

bizhub 423/363/283/223 4-6

4.3 Configuring settings to enable use of the Web browser

4.3.2 Restricting the use of Web browser for each user

If user management is performed in the MFP, you can restrict use of the Web browser for each user.

[Function Permission]

1Press Utility/Counter to display [Utility].

2Press [Administrator Settings].

3Enter the administrator password, and then press [OK].

4Press [User Authentication/ Account Track].

5In [User Authentication Settings], press [User Registration].

6Select the user you want to restrict use of the Web browser, and press [Edit].

%If you want to restrict public users to use the Web browser, press [ ] and select [Public].

7Press [Function Permission].

8In [Function Permission] (3/3), specify [Web Browser] to [Restrict], and press [OK].

Reference

-This setting is not available if [Invalid] is specified in [Administrator Settings]ö[Network Set-

tings]ö[Web Browser Setting].

-Configuring the function permission of the public user is available when public user access is allowed

in [Administrator Settings]ö[User Authentication/ Account Track]ö[General Settings]ö[Public User

Access].

-If users are managed in the external server, you can configure the default settings for function permis-

sions to users who log in to the MFP using external the first time. To configure server authentication for

it, select [Administrator Settings]ö[User Authentication/ Account Track]ö[User Authentication Set-

tings]ö[Administrative Settings]ö[Default Function Permission]ö[Web Browser]. For details on [De-

fault Function Permission], refer to the [User's Guide Network Administrator].

bizhub 423/363/283/223 4-7

4.3 Configuring settings to enable use of the Web browser

4.3.3 Restricting the use of local contents

If the Web browser is used through the use of an application that interacts with the Web browser, you can

access the files (pre-installed contents, image files, help files, etc.) saved in the HDD of the MFP from the

Web browser.

The administrator can restrict the use of files saved in the HDD of the MFP from the Web browser as required.

Reference

-For details on the application that interacts with the Web browser, contact your service representative.

[Web browser contents access]

1Press Utility/Counter to display [Utility].

2Press [Administrator Settings].

3Enter the administrator password, and then press [OK].

4Press [Security Settings].

5Press [Security Details].

6In [Security Details] (4/4), specify [Web browser contents access] to [Restrict], and press [OK].

bizhub 423/363/283/223 4-8

4.4 Basic operation

4.4.1 Screen components

The Web browser screen has the following components.

Reference

-When the optional local connection kit is installed in the MFP, sound from Web pages or Flash contents

can be output through the speaker in the local connection kit. The speaker volume can be adjustable

using the speaker icon. For details, refer to page 4-11.

No. Name Description

1 Toolbar Operates Web Browser or configure the Web Browser settings. It is always

displayed on the Web Browser screen.

For details, refer to page 4-12.

2 Scroll bar Appears on the right of the screen when all display contents are not dis-

played vertically in one screen.

Appears at the bottom of the screen when all display contents are not dis-

played horizontally in one screen.

3 Window When multiple windows are displayed, you can switch the window using

the tab located at the bottom of the screen.

Press [e] in the active tab to close the window.

4 Icon The icon that represents the connection status appears when loading con-

tents.

If the optional local connection kit is installed in the MFP, the speaker icon

is displayed.

4 3

bizhub 423/363/283/223 4-9

4.4 Basic operation

4.4.2 Operating instructions

Operate Web Browser mainly on the Touch Panel. You can perform some of the operations from the Keypad

of the Control Panel.

Reference

-Using the Stylus Pen to operate the Touch Panel provides operating comfort.

Operation using the Touch Panel

Operate Web Browser mainly on the Touch Panel.

-To select an item, press a desired item.

-If a link is provided in the contents, press the link to jump to it.

-If you need to enter characters, press the entry form in the dialog box or contents. The keyboard screen

appears. To enter characters, use the keyboard screen.

-To scroll the screen, press [ ], [ ], [ ], or [ ] on the scroll bar.

Operation using the Keypad

You can use the Keypad in the Control Panel to enter numeric values or select items in the list.

bizhub 423/363/283/223 4-10

4.4 Basic operation

4.4.3 How to enter text

If you need to enter characters, press the entry form in the dialog box or contents. The keyboard screen ap-

pears.

Entering text

Press the character you want to enter in the keyboard screen.

-To enter uppercase letters or symbols, press [Shift].

-You can also enter numbers using the Keypad.

Reference

-To change a character in the entered text, press [ ] or [ ] to move the cursor to the character to be

changed, press [Delete], and then enter the desired letter or number.

-To delete all characters entered, press C (clear) in the Control Panel.

-To revert to the setting when the keyboard was displayed, press [Undo].

-Some buttons may not appear, depending on the characters being entered.

-When entering character codes on multiple lines is allowed, the linefeed button appears.

4.4.4 Screen display mode

There are three types of display modes for the Web Browser screen.

[Normal]

This is the display mode same as that for the normal Web Browser. Content is not adjusted to the screen

size. Scroll the screen horizontally and vertically when browsing it.

(The default is set to [Normal]. )

[Just-Fit Rendering]

The content layout is maintained and a page is displayed by reducing its width to fit the screen. Scroll the

screen horizontally and vertically when browsing it.

[Smart-Fit Rendering]

The table is divided and laid out vertically to fit the width of the screen. Scroll the screen horizontally and ver-

tically when browsing it. The layout may be changed depending on the page to be displayed.

d Reference

For details on changing the display mode, refer to page 4-16.

bizhub 423/363/283/223 4-11

4.4 Basic operation

4.4.5 Specifying speaker volume

When the optional local connection kit is installed in the MFP, sound from Web pages or Flash contents can

be output through the speaker in the local connection kit.

If a speaker is connected to the MFP, the speaker icon is displayed at the bottom left of the Web browser.

Press the speaker icon to display the Volume screen where you can control the speaker volume.

-To increase the volume one level, press [Higher], or the # key on the Control Panel.

-To reduce the volume one level, press [Lower], or the * key on the Control Panel.

-Pressing [Mute] outputs no sound. In addition, the speaker icon changes to the speaker mute icon.

bizhub 423/363/283/223 4-12

4.5 Toolbar

The toolbar on the top of the Web Browser screen allows you to perform various operations and configure

various settings.

4.5.1 Description of the toolbar

The following shows the functions of the buttons on the toolbar.

Icon Name Description

Back Brings you back to the previous page.

Next Brings you to the next page.

Reload/Abort Reloads the currently displayed page to update the contents.

If you press this button while loading a page, the loading stops.

Home Displays the page registered as the home.

By default, "http://www.konicaminolta.com/" is registered.

For details on changing the home page, refer to page 4-16.

[Favorites] -

[List]

Displays the list of registered favorites.

For details, refer to page 4-13.

[Favorites] -

[Add]

Adds the URL of the currently displayed page to the favorites. Add-

ing a URL to the favorites requires the administrator authority.

For details, refer to page 4-13.

[Address] Brings you to the screen to enter a URL.

For details, refer to page 4-14.

[History] Displays the list of pages displayed up till then.

For details, refer to page 4-14.

[Print] Prints the currently displayed contents.

For details, refer to page 4-15.

[Menu] Configure the Web browser settings. There are two types of menus;

one for the user and one for the administrator.

For details, refer to page 4-15.

bizhub 423/363/283/223 4-13

4.5 Toolbar

4.5.2 [Favorites] - [List]

Press [List] to display the list of the registered favorites using the thumbnails. Selecting a favorite allows you

to access the corresponding URL.

Reference

-If the user is using the Web browser linked to My Panel, the list of favorites for the user who is managed

in the server is displayed.

List of favorites

Press to display the list of operations available for the item. From this list, select the desired operation.

The following shows the available operations.

4.5.3 [Favorites] - [Add]

(Adding a URL to the favorites requires the administrator authority. )

Pressing [Add] prompts you to enter the administrator password. Enter the administrator password and press

[OK]. The registration screen appears. Check the contents and press [OK]. The URL of the displayed page is

added to the favorites. The MFP can hold up to 100 favorites.

-To register the thumbnail images of the page to be added to the favorites, select the [Register Thumb-

nail] check box on the registration screen.

-It is registered with the title previously given to the contents. To change the title, press the entry form

for the title on the registration screen, and then change the title.

Reference

-For users using the Web browser by linking to My Panel, administrator authority is not required. My Pan-

el can hold up to 20 favorites for each user.

Item Description

[List View]/[Thumbnail

View]

Switches the favorites display between the list display and thumbnail view.

[Address View]/[Title

View]

Switches the display of favorites between the address view and title view.

[Delete All] Deletes all registered favorites.

Deleting the favorites requires the administrator authority.

[Close] Closes the list of favorites.

Item Description

[Open New Window] Opens the selected favorite with a new window.

[Edit] Edits the title and address of the selected favorite.

Editing the favorites requires the administrator authority.

[Up] Brings you above the selected favorite.

Use this button when the list of favorites is displayed in the list view.

[Down] Brings you below the selected favorite.

Use this button when the list of favorites is displayed in the list view.

[Delete] Deletes the selected favorite.

Deleting the favorites requires the administrator authority.

[Close] Closes this screen.

bizhub 423/363/283/223 4-14

4.5 Toolbar

4.5.4 [Address]

Press [Address] to display the screen for entering the address.

Press the entry form to display the keyboard screen. Enter the URL of the page to be displayed, and press

[OK] or [Open New Window].

Press [Input History] to display the list of input history. You can reference the past inputs. The MFP can hold

up to 100 input history records.

Reference

-If you display the screen for entering the address, you see the URL of the page being displayed. To

delete the URL currently shown, display the keyboard screen and press [Delete]. Press C (clear) in the

Control Panel to delete all data entries.

-If the user is using the Web browser linked to My Panel, the list of input history records for the user who

is managed in the server is displayed. My Panel can hold up to 20 input history records for each user.

4.5.5 [History]

Press [History] to display the display history screen. From the list of display history, select a page to be dis-

played again. The MFP can hold up to 100 display history records.

Reference

-If the user is using the Web browser linked to My Panel, the list of display history records for the user

who is managed in the server is displayed. My Panel can hold up to 20 display history records for each

user.

[Display History]

Press to display the list of operations available for the item. From this list, select the desired operation.

The following shows the available operations.

Item Description

[Address View]/[Title

View]

Switches the display history between the address view and title view.

[Delete All] Deletes all registered entries in the display history.

Deleting the display history requires the administrator authority.

[Close] Closes the list of display history.

Item Description

[Open New Window] Loads the selected display history with a new window.

[Delete] Deletes the selected display history.

Deleting the display history requires the administrator authority.

[Close] Closes this screen.

bizhub 423/363/283/223 4-15

4.5 Toolbar

4.5.6 [Print]

Press [Print] to display the Print screen.

Configure the print settings, and then press [Start] or the Start key on the control panel. The displayed con-

tents are printed.

Reference

-If you attempt to print a Web page or JPEG or other image that takes up a large amount of memory, a

scan error may occur and printing will be disabled.

-The setting value of [Finishing] varies depending on which options are installed.

– The Staple settings are available only if the optional finisher is installed.

– The Punch settings are available only if the punch kit is installed on the optional finisher.

– The Fold and Center Staple & Fold functions can be used when a saddle stitcher is installed on the op-

tional finisher.

4.5.7 [Menu]

Press [Menu] to configure the Web Browser settings. There are two types of menus; one for the user and one

for the administrator.

For details, refer to page 4-16.

Item Description

[Paper] Select the size of paper for printing.

[Simplex/Duplex] Select whether to print in 2-sided mode.

[Stamp Settings] Specify whether to print the [Title], [URL], [Date/Time], and [Page Number].

[Finishing] Configure settings for collating, grouping, offsetting. stapling, hole punching,

folding, or binding.

bizhub 423/363/283/223 4-16

4.6 Configuring the Web Browser settings

Pressing [Menu] in the tool bar displays the menu for the user. Users can only view the Web browser opera-

tion settings and information.

The administrator of the MFP can configure the operating environment and security settings in addition to the

Web browser operation settings. To display the administrator menu, press [Administrator] in the menu

screen, and enter the administrator password.

4.6.1 [Page Operation]

In the [Page Operation] tab, configure the settings for page operation.

Reference

-Items with * are displayed only for the administrator menu.

-[Use for Home Page] is displayed for users using the Web browser by linking to My Panel.

4.6.2 [Display]

In the [Display] tab, configure settings for displaying contents. The administrator of the MFP can configure

the settings to hide or display images and animations, enable or disable JavaScript, and make detailed set-

ting related to the contents display.

Item Description

[Use for Home Page]*Registers the displayed page as the home page.

[Page Memo] Displays the page saved as a page memo. Selecting the page memo from the

list displays the corresponding page.

Press to display the list of operations available for the item. From this list,

select the desired operation.

[Save as Page Memo] Saves the displayed page as it is.

[Zoom Display] Press [Zoom Display] to display the key to enlarge or reduce the page display

size. Press the key to adjust the page display size.

Item Description

[Display Mode] Select the display mode for Web Browser from [Normal], [Just-Fit Rendering],

and [Smart-Fit Rendering].

For details, refer to page 4-10.

[Encoding] Specify the encode type to be used when displaying contents.

[Detail Settings] Configure settings for displaying contents.

• [Image]: Select this check box to display images.

• [Animation]: Select this check box to display animation GIF.

• [Table]: Select this check box to recognize the table in HTML and adjust

the layout.

• [JavaScript]: Select this check box to enable JavaScript in contents.

• [CSS]: Select this check box to enable CSS in contents.

• [Ward Wrap]: Select this check box to enable the word wrap in contents.

• [Line Boundary Char. Check]: Select this check box to enable the line

boundary character check in contents.

• [Rapid-Render]: Select this check box to enable the Rapid-Render func-

tion.

• [Pop-Up Window]: Select this check box to allow displaying the pop-up

window.

• [Offline Permission]: Select this check box to allow the use of the contents

off-line.

• [Auto Flash Playback]: Select this check box to automatically play a Flash

content.

• [Enable Offline Display]: Select this check box to enable viewing of the con-

tents off-line. Displayed when [Offline Permission] is allowed by the admin-

istrator.

[Color Selection Set-

ting]

Select a color for the selected item ([Green], [Blue], [Yellow], or [Orange]).

bizhub 423/363/283/223 4-17

4.6 Configuring the Web Browser settings

4.6.3 [Manage windows]

In the [Manage windows] tab, operate the window. Up to five windows can be opened.

4.6.4 [Settings]

The [Settings] tab allows you to check and reset the Web browser information. The administrator of the MFP

can configure the operating environment and security settings of the Web browser.

Reference

-Items with * are displayed only for the administrator menu.

-The following settings are available for users using the Web browser by linking to My Panel.

– [Startup Settings]

– Setting for deleting [Cookies]

– Setting for deleting [Authentication Information]

-My Panel can hold up to 20 items of cookies and authentication information for each user.

Item Description

[Create new window] Displays the contents of the URL registered as the home page with a new win-

dow.

[Open in new window] Displays the link destination page with a new window.

[Close active window] Closes the active window.

[Close other windows] Closes all windows.

This is not selectable when only one window is open.

Item Description

[Startup Settings]*Specify whether to display the page registered as the home page or the last

page being displayed when you exited Web Browser previously, at the startup

of Web Browser.

[Security]*Configure SSL or TLS setting, or display a root certificate or CA certificate.

[Cookies]*Configure settings to receive and delete cookies. This menu is also used to de-

lete all cookies saved in the MFP.

[Cache]*Configure settings to use and delete caches. This menu is also used to delete

all caches saved in the MFP.

[Proxy]*Configure the settings for use of proxy.

To use the proxy, register the address and port for the proxy server. If proxy

authentication is required, register the ID and password for use in proxy au-

thentication.

[Authentication Infor-

mation]*Specify the timing to delete the authentication information you have entered in

the contents. This menu is also used to delete all authentication information

saved in the MFP.

[Access Log]*Check for access history of all users.

You can check the [ID], [User Name], [URL] and [Access].

[Web Browser Infor-

mation]

Displays Web Browser information.

[Reset] Restart the Web browser.

bizhub 423/363/283/223 4-18

4.7 Printing, displaying, or saving a document file

If a link to a document file is provided in the displayed contents, you can print, display, or save the document

file.

-The PDF and XPS formats are supported for the document files.

-You cannot display an XPS file.

Press the link to the document file in the contents to display the top screen of the document file.

4.7.1 Printing a document file

Press [Print] to display the Print screen.

Configure the print settings, and then press [Start] or the Start key on the control panel. The document file is

downloaded and printed.

Reference

-If you attempt to print a document file that takes up a large amount of memory, a scan error may occur

and printing will be disabled.

-If the downloaded PDF is encrypted, it is saved in the Encryption PDF User Box without being printed.

-The setting value of [Finishing] varies depending on which options are installed.

– The Staple settings are available only if the optional finisher is installed.

– The Punch settings are available only if the punch kit is installed on the optional finisher.

Item Description

[Paper] Select the size of paper for printing.

[Simplex/Duplex] Select whether to print in 2-sided mode.

[Stamp Settings] Press this button to specify whether to print a [Date/Time] and [Page Number].

[Finishing] Configure settings for collating, grouping, offsetting. stapling, hole punching,

folding, or binding.

bizhub 423/363/283/223 4-19

4.7 Printing, displaying, or saving a document file

– The Fold and Center Staple & Fold functions can be used when a saddle stitcher is installed on the op-

tional finisher.

4.7.2 Displaying a document file

Press [View] to display the link destination PDF file.

The toolbar on the top of the screen allows you to enlarge, reduce, print, or save the PDF file.

Key Description

Brings you back to the top page.

Brings you back to the previous page.

Brings you to the next page.

Brings you to the last page.

Rotates the display 90 degrees clockwise.

Increases the zoom ratio.

Reduces the zoom ratio.

Displays according to the width of the display area.

Displays the entire page.

Select the User Box to save the document file.

Configure the print settings, and print the document file.

Displays the splash window (displayed mo ftware activates).mentarily when the so

Closes the screen.

bizhub 423/363/283/223 4-20

4.7 Printing, displaying, or saving a document file

4.7.3 Saving a document file

Press [Save]. The User Box selection screen is displayed.

Select the User Box to save the file, press [OK], and then [Start] or Start. Then the document file is saved in

the User Box.

Reference

-To save a document file to a User Box, you must register the User Box in the MFP in advance. For de-

tails, refer to the [User's Guide Box Operations].

-When printing a document file (full color) that was saved in a User Box from the Web browser, you can-

not specify [Zoom] or [Combine].

bizhub 423/363/283/223 4-21

4.8 Uploading a document file

If document files are shared on the server, you can upload a scanned document file or a document file in a

User Box to the server using a Web Browser.

This section explains how to upload a document file, using the following upload site as an example.

Example

4.8.1 Restrictions

Note that there are following restrictions to use this function.

-PDF, TIFF, or XPS is the type of a document file that can be uploaded. A document cannot be divided

to upload.

-Multiple document files cannot be uploaded at the same time.

-The user cannot manually edit the file name text box.

-If you perform one of the following operations after selecting a document file to be uploaded, the job is

deleted together with the selected document file.

– The System Auto Reset function has been started.

– The Web browser has been closed.

– The upload site has been updated by operating the toolbar of the Web browser.

– The Web browser has been restarted.

– The user has logged out during login processing.

– The sub power switch has been turned off.

–Reset has been pressed to reset the panel.

4.8.2 Uploading a scanned document file

The following explains the procedure to upload a scanned document file.

Reference

-This procedure is not available for users who are disabled from scanning data.

-The file format cannot be set to JPEG when scanning an original to be uploaded.

1Display the upload site using the Web browser of the MFP.

2Press the button to select a document file to be uploaded.

%In this example, press [Browse].

Item Description

[Browse...] Press this button to select a document file to be uploaded.

"type" is set to "file" in the Input tag of HTML.

[OK] Press this button to upload a document file.

"type" is set to "submit" in the Input tag of HTML.

bizhub 423/363/283/223 4-22

4.8 Uploading a document file

3Press [Scan].

4Place the original to be uploaded on the MFP.

5Configure the scan settings, and press [Start] or the Start key.

%If Proof Copy is selected, you can check finishing.

After scanning is completed, the file name is displayed in the text box.

6Press the button to start uploading.

%In this example, press [OK].

Uploading of a document file then starts.

4.8.3 Uploading a document file in a User Box

The following explains the procedure to upload a document file retrieved from a User Box.

Reference

-This procedure is not available for users who are disabled from accessing the saved documents.

-Before uploading a document file in a User Box, create a User Box to save the document file in.

-Only the Public User Box and Personal User Box can be selected.

-The file format cannot be set to JPEG when selecting a document file to be uploaded from a User Box.

When selecting a JPEG document file saved in a User Box, the file format is changed to PDF. If neces-

sary, specify the appropriate file format before uploading a document file.

-When uploading a document file saved in a User Box while Page Separation is enabled, Page Separa-

tion is canceled and changed to Multi Page.

1Display the upload site using the Web browser of the MFP.

bizhub 423/363/283/223 4-23

4.8 Uploading a document file

2Press the button to select a document file to be uploaded.

%In this example, press [Browse].

3Press the [User Box] key.

4Select a desired User Box, and press [Use Document].

5Select a document file to be uploaded, and press [File Settings].

%Select multiple document files and press [Combine]; they can be combined as one file. The combi-

nation order can be changed as required.

%Select a document file and press [Document Details] to check the date and time the document file

was saved and to preview the image.

6Configure the file setting, and press [Start] or the Start key.

%Press [Application] to configure the stamp or page number print setting.

The file name appears in the text box.

7Press the button to start uploading.

%In this example, press [OK].

Uploading of a document file then starts.

5PageScope Web Connection

(Web Browser Function)

bizhub 423/363/283/223 5-2

5.1 Using PageScope Web Connection

5 PageScope Web Connection (Web Browser Func-

tion)

5.1 Using PageScope Web Connection

PageScope Web Connection is a device management utility that is supported by the HTTP server built in

this machine. To use this utility, directly access the MFP connected to the network using Web Browser.

To use this utility using Web Browser installed in the MFP, only the User Box function is available.

This chapter describes how to use documents in the User Box of the MFP on the network by operating Pag-

eScope Web Connection using the Web Browser installed in the MFP.

Reference

-This function can be used on the MFP with i-Option LK-101 v2 or i-Option LK-103 v2 registered.

-i-Option LK-101 v2 or i-Option LK-103 v2 must be registered also in the MFP access destination.

-For details on using the Web Browser installed in the MFP, refer to page 4-2.

-To operate PageScope Web Connection from a Web browser of your computer, you can use various

functions such as the status check, setting change, and network setting functions of the MFP. For de-

tails, refer to the [User's Guide Network Administrator].

5.1.1 Prior check

The most recent information may not appear in PageScope Web Connection screens because older ver-

sions of pages are saved in the cache for the Web browser. In addition, problems may occur when the cache

is used.

When using PageScope Web Connection, disable the cache for the Web browser.

Reference

-Changing the cache settings requires the administrator authority.

1Press [Menu] on the toolbar of the Web browser.

2Press [Administrator].

3Enter the administrator password, and then press [OK].

4Press the [Settings] tab, and then select [Cache].

5Clear the [Use cache] check box, and then press [OK].

5.1.2 How to access

Start the Web browser, and then specify the IP address of the MFP to be accessed.

1Press [Address] on the toolbar of the Web browser.

2Press the entry form to display the keyboard screen.

3Enter the IP address of the MFP to be accessed, and then press [OK].

4Press [OK] or [Open New Window].

The PageScope Web Connection screen appears.

Reference

-If you have specified to not receive cookies for Web browser settings, PageScope Web Connection

screen does not appear. For details on configuring cookie settings, refer to page 4-17.

-If you display the screen for entering the address, you see the URL of the page being displayed. To

delete the URL currently shown, display the keyboard screen and press [Delete]. Press C (clear) in the

Control Panel to delete all URL entries.

bizhub 423/363/283/223 5-3

5.2 Screen components

The PageScope Web Connection screen is constructed as shown below.

No. Name Description

1 KONICA MINOLTA

logo

Press the logo to go to the KONICA MINOLTA Web site (http://www.kon-

icaminolta.com/).

2PageScope Web

Connection logo

Press the logo to display the version information for PageScope Web

Connection.

3 Login user name Displays the icon of the current mode and the name of the user who is

logged on (public, registered user, or account).

4 [Logout] Press this button to log out from the current mode.

5 Contents display Displays the contents of PageScope Web Connection.

3 4

bizhub 423/363/283/223 5-5

5.4 Using the User Box function

To use PageScope Web Connection using the Web Browser installed in the MFP, the following operations

are available as the User Box function.

-Operating documents in the User Box on the MFP being used or a different MFP connected to the net-

work.

-Using the Public, Personal, and Group User Boxes as User Box Types.

-Displaying, printing, and deleting a document in the User Box.

5.4.1 Open User Box

Logging in using PageScope Web Connection displays the list of User Boxes (Public, Personal, and Group

User Boxes) registered in the accessed MFP.

[Open User Box]

Select a desired User Box name ([User Box Name]) at User Box List. Alternatively, directly enter a User Box

number ([User Box Number]) and User Box password ([User Box Password]), and then press [OK].

Reference

-When you select a User Box name ([User Box Name]) with a password specified in [User Box List], a

screen for entering the password appears.

[Open User Box]

[User Box List]

Item Description

[User Box Number] Enter the User Box number to be opened.

[User Box Password] If a password is set to the target User Box, enter the password.

Item Description

[Search from Index] Switch the index display according to the indexes selected when creating a

User Box.

[Page (Display by 50

cases)]

When this machine contains 50 or more User Boxes, specify the desired page

to change the display.

User Box List Displays the [User Box Number], [User Box Name], [Type] and [Time Stored].

A key icon appears beside User Boxes where a password has been specified.

bizhub 423/363/283/223 5-6

5.4 Using the User Box function

[File List]

Select a User Box in [Open User Box]. The basic information of the User Box is displayed with a list of the

documents saved in the User Box.

Item Description

[Thumbnail View] Specify whether to view the thumbnail images of the document.

Set to [OFF] for list display.

[Specify operation] Select an operation.

For details, refer to page 5-7.

[Changes the display] Press this button to display the [Select] check box beside all documents with

which the selected operation can be performed.

[Select] Displays a check box beside all documents with which the selected operation

can be performed.

[Thumbnail] Displays thumbnail images of the document.

[Document Name] Displays the name of the document.

[Number of Originals] Displays the number of originals in a document.

[Edit Name] Press this button to change the document name.

bizhub 423/363/283/223 5-7

5.4 Using the User Box function

5.4.2 Document operations

A selected document can be printed or deleted.

Printing a document

1Select [Print] from [Specify operation], and then press [Changes the display].

A check box appears beside all printable documents.

2Select the check box for the document to be printed, and then press [Print Setting].

bizhub 423/363/283/223 5-8

5.4 Using the User Box function

3Configure necessary settings, and then press [OK].

%In [Page Range], select whether to print all pages of the selected document or to print by specifying

a page range.

%In [Change order], you can change the print order when printing multiple documents.

4Press [Open File].

5Press [Print].

%If [View] is pressed, a PDF file appears. To print the displayed PDF file, press .

6Configure print settings, and then press [Start] or the Start key on the control panel.

Reference

-If the [Function Version] of the destination MFP is not [Version 3], press [Open File] in Step 4 to display

the PDF file on the panel. To print the displayed PDF file, press . To check the function version of

the MFP, select [Device Information] in [Utility].

bizhub 423/363/283/223 5-9

5.4 Using the User Box function

Deleting a document

1Select [Delete] from [Specify operation], and then press [Changes the display].

A check box appears beside the documents that can be deleted.

2Select the check box for the document to be deleted, and then press [Delete].

%Select the [Check/Uncheck (applied to all the documents)] check box to select all documents.

bizhub 423/363/283/223 5-10

5.4 Using the User Box function

3Check the document name to be deleted, and then press [OK].

The document is deleted.

6Image Panel

bizhub 423/363/283/223 6-3

6.2 Displaying the Image Panel

In [Application Menu], press [Image Panel] to display the Image Panel top screen.

d Reference

For details on the [Application Menu], refer to page 3-3.

bizhub 423/363/283/223 6-4

6.3 Operating Image Panel

6.3.1 Screen components

The Image Panel screen consists of the following.

No. Name Description

1 Login Information

area

Displays the user name and icon of the user who is currently logged in.

2 Read Data area Scan a document, retrieve a document from a User Box or external mem-

ory, and send data from a cellular phone or PDA.

3 Desktop area Documents read in the Read Data area are displayed in a thumbnail view

or list view.

4 List Display/Thumb-

nail View switching

Switches the desktop area display between the list display and thumbnail

view.

5 Message area Displays an auxiliary message such as operating instructions.

6 Status area Displays the date and current time.

If an alert occurs, an alert icon appears.

7 Edit tool area Edit the page, combine and change settings of the document after it is

scanned.

8 Send Tray/Edit Tool

display switching

Switches the display between the send tray and edit tool display.

For details on the send tray, refer to page 6-16.

9 Document Destina-

tion area

Specify a destination of the read document from [Print] or [Destination

List].

61 3 4 5

bizhub 423/363/283/223 6-5

6.3 Operating Image Panel

6.3.2 General operation

The following describes the operation flow from document reading processing to sending processing by

showing operations of Image Panel in order of "reading a document", "editing a document", and "specifying

a destination".

Reference

-You can specify a destination first, and then read a document.

In the Read Data area, read or retrieve a document.

• To scan a document, place the document, and then press [Scan]. Configure the scan settings as need-

ed, and then start to read the document. For details, refer to page 6-7.

• To use a document saved in a User Box, select the User Box from [Document Source List], and select

the document you want to retrieve. For details, refer to page 6-8.

• To use a document saved in an external memory, select [External Memory] from [Document Source

List], and select the document you want to retrieve. For details, refer to page 6-9.

• To use data saved in a cellular phone or PDA, select [Mobile] from [Document Source List]. For details,

refer to page 6-10.

Select [Scan] Select [Document Source List].

In the Edit Tool area, edit the read document. For details, refer to page 6-11.

In the Document Destination area, specify a destination of the read document.

• To print, press [Print]. For details, refer to page 6-14.

• To send the document, select a destination from [Destination List]. For details, refer to page 6-15.

• To save data in an external memory, press [External Memory] in the Destination List screen. For de-

tails, refer to page 6-15.

Select [Print]. Select [Destination List]

bizhub 423/363/283/223 6-7

6.3 Operating Image Panel

6.3.3 Reading a document

Scan a document, retrieve a document from a User Box or external memory, and send data from a cellular

phone or PDA.

Scanning a document

Press [Scan] to display the Scan Settings screen. Configure the scan settings as needed, and then press

[Scan].

Reference

-Only one document can be scanned.

Item Description

[Original Type] Select the image quality from [Text], [Text/Photo], [Photo], [Dot Matrix Original]

and [Copied Paper] according to the contents of the original to be scanned.

[Simplex/Duplex] Select either to scan a 1-sided original or 2-sided original.

[Resolution] Select the scan resolution from [200 e 100dpi (Standard)], [200 e 200dpi

(Fine)], [300 e 300dpi], [400 e 400dpi (Super Fine)] and [600 e 600dpi (Ultra

Fine)].

[File Type] Select a file type from [PDF], [Compact PDF], [TIFF], [JPEG], [XPS] and [Com-

pact XPS].

Select whether to save the whole scanned pages as one file, or to divide a file

in specified number of pages in order to save data. You cannot select [Multi

Page] if [JPEG] is selected for file type.

To send divided files by attaching them to an E-mail, specify [E-mail Attach-

ment Method]. Select [All Files Sent as one (1) E-mail] to attach all divided files

to one E-mail message. Select [One (1) File per E-Mail] to send E-mail messag-

es for each divided file.

Selecting [Compact PDF] for file type allows you to specify [Outline PDF].

If either i-Option LK-102 or i-Option LK-103 v2 is registered in the MFP, se-

lecting [PDF] or [Compact PDF] for file type allows you to specify [Encryption]

and [PDF Document Properties]. For details on the function, refer to page 7-2.

If i-Option LK-105 is registered in the MFP, selecting [PDF] or [Compact PDF]

for the file type allows you to specify [Searchable PDF]. For details on the func-

tion, refer to page 8-2.

[Density] Adjust the density for scanning.

[Color] Select the scan color from [Auto Color], [Full Color], [Gray Scale] and [Black].

[Document Name] Specify the document name.

[Separate Scan] Press this button to divide scanning of the document into several times. It is

useful for the following cases.

• When the number of pages of a document is too many, and it cannot be

loaded into the ADF

• When placing the originals on the original glass

• When 1-sided originals and 2-sided originals are mixed

bizhub 423/363/283/223 6-8

6.3 Operating Image Panel

Retrieving from User Box

Select a User Box from [Document Source List] to display the Use Document screen. Select a document to

be retrieved, and then press [OK].

Reference

-If a password has been specified for the selected User Box, the password input screen appears. Enter

the password.

-Only one User Box can be selected.

-Up to 10 documents can be retrieved from a User Box at one time.

-If a User Box is specified as a destination, you cannot retrieve more than one document.

-You cannot specify the User Box, from which you retrieved the document, as the destination.

Item Description

[Edit Name] Press this button to change the name of the selected document.

[Document Details] Press this button to check the detailed information or preview image of the se-

lected document.

bizhub 423/363/283/223 6-10

6.3 Operating Image Panel

Using data saved in a cellular phone or PDA

Select [Mobile] from [Document Source List]. Selecting [Mobile/PDA] and pressing [OK] displays the cellular

phone icon on the desktop area.

Reference

-To connect the MFP to a cellular phone or PDA, install the optional Local Interface Kit EK-605 in the

MFP. Additionally, configure the following settings in the MFP.

– Set [Administrator Settings]ö[Network Settings]ö[Bluetooth Setting] to [Enable]. Also, set [Adminis-

trator Settings]ö[System Connection]ö[Cellular Phone/PDA Setting] to [Allow].

– To perform user authentication, in [Administrator Settings]ö[User Authentication/ Account

Track]ö[User Authentication Settings]ö[User Registration], set [Function Permission]ö[Cellular

Phone/PDA] to [Allow] for each user.

-If [Mobile/PDA] is selected, you cannot read a document using [Scan] or [Document Source List].

-You can only specify either [Print] or a User Box as a destination for sending data from a cellular phone

or PDA. Also, you can specify only one User Box as a destination. To save a document in a User Box,

you must create a User Box and register the User Box in the address book in advance.

-If other than [Print] or a User Box is specified as a destination, you cannot select [Mobile].

-This machine supports RepliGo version 2.1.0.8.

-To print an XHTML file, since a linked file is retrieved using the WebDAV client function, you must con-

figure the following settings in the MFP in advance.

– Set [Administrator Settings] [WebDAV Settings]ö[Network Settings]ö ö[WebDAV Client Settings] to

[ON].

– To connect via a proxy, register a proxy server in [Proxy Server Address] of [WebDAV Client Settings].

Additionally, set [User Settings]ö[Cellular Phone/PDA Setting]ö[Proxy Server Use] to [Yes].

– In [User Settings]ö[Cellular Phone/PDA Setting]ö[Link File Error Notification], specify the operation for

the machine to execute when it is unable to retrieve the linked file.

d Reference

For details on how to send data from a cellular phone or PDA, refer to page 6-17.

The function to connect the MFP to a cellular phone or PDA is available even if the license kit is not registered.

For details, refer to the [User's Guide Box Operations] and [User's Guide Print Operations].

Item Specifications

Communication proto-

col

Bluetooth Ver. 2.0 + EDR

Supporting profile OPP/BPP/SPP

Supporting file type PDF/CPDF/XPS/CXPS/TIFF/JPEG/XHTML/RepliGo

Supporting XHTML file Character code: UTF-8, Shift-JIS, ISO-8859

Extension of link file: JPEG, JPG, PNG

bizhub 423/363/283/223 6-12

6.3 Operating Image Panel

[Document/Page] - [Combine Documents]

Combine selected multiple documents. You can use [Move] to change the combination order.

Reference

-You can only select either [Print] or [Destination List] as a destination of a combined document.

-Up to 10 documents can be combined at one time.

-You cannot combine a scanned document with a document retrieved from a User Box.

[Rotate Page] Press this button to rotate the selected page.

The allowable rotation angles are left 90 degrees, right 90 degrees, and 180

degrees.

[Move Page] Press this button to change the order by moving the selected page.

While checking the thumbnail images, you can select the moving position.

Item Description

bizhub 423/363/283/223 6-13

6.3 Operating Image Panel

[Document/Page] - [Document Settings]

Configure settings for sending the selected document.

You can change the resolution of the document, file type, and color setting.

Reference

-If you have selected multiple documents, the document setting function is not available.

-If you have selected a document retrieved from an external memory, the document setting function is

not available.

[Return to Scan Dest.]

Press [Return to Scan Dest.] to restore the selected document to the source location.

-The scanned document is deleted from the MFP.

-The document retrieved from a User Box is restored to the source User Box.

Item Description

[Resolution] Select the scan resolution from [Settings when saving], [200 e 100dpi (Stand-

ard)], [200 e 200dpi (Fine)], [300 e e 300dpi], [400 400dpi (Super Fine)] and [600

e 600dpi (Ultra Fine)].

[File Type] Select the file format for sending data from [PDF], [Compact PDF], [TIFF],

[JPEG], [XPS] and [Compact XPS].

Select whether to save the whole scanned pages as one file, or to divide a file

in specified number of pages in order to save data. You cannot select [Multi

Page] if [JPEG] is selected for file type.

To send divided files by attaching them to an E-mail, specify [E-mail Attach-

ment Method]. Select [All Files Sent as one (1) E-mail] to attach all divided files

to one E-mail message. Select [One (1) File per E-Mail] to send E-mail messag-

es for each divided file.

Selecting [Compact PDF] for file type allows you to specify [Outline PDF].

If either i-Option LK-102 or i-Option LK-103 v2 is registered in the MFP, se-

lecting [PDF] or [Compact PDF] for file type allows you to specify [Encryption]

and [PDF Document Properties]. For details on the function, refer to page 7-2.

If i-Option LK-105 is registered in the MFP, selecting [PDF] or [Compact PDF]

for the file type allows you to specify [Searchable PDF]. For details on the func-

tion, refer to page 8-2.

[Color] Select the scan color for sending data from [Use Existing Color Setting], [Full

Color], [Gray Scale] and [Black].

bizhub 423/363/283/223 6-14

6.3 Operating Image Panel

6.3.5 Specifying a destination

Specify a destination of the read document.

Printing

Press [Print] to print data directly from the MFP. Configure the print settings, and then press [OK].

Reference

-If you have scanned multiple documents, the print setting function will not be available.

-When you print a combined document, [Combine] and [Zoom] are not available.

-When printing a document with an embedded password using the password copy function, you cannot

specify [Combine] or [Zoom]. For details on the password copy function, refer to the [User's Guide Copy

Operations].

-When you print a document that has been retrieved from an external memory, [Combine] and [Zoom]

are not available.

-When you print a document of JPEG, XPS, or Compact XPS format that has been retrieved from an

external memory, [2-Sided] is not available. Also, Staple and Punch are not available for the [Finishing]

setting.

-When printing data saved in a cellular phone or PDA, you can only check the print settings. To change

print settings, select [User Settings]ö[Cellular Phone/PDA Setting]ö[Print].

Reference

-The setting value of [Finishing] varies depending on which option is installed.

– The Staple settings are available only if the optional finisher is installed.

– The Punch settings are available only if the punch kit is installed on the optional finisher.

-[Continuous Print] is displayed when multiple documents are combined using the editing tool, and then

[Print] is selected as a destination.

Item Description

[Copies:] Specify the number of copies to be printed using the Keypad.

[Print] Select whether to print in 2-sided mode.

[Finishing] Press this button to configure settings for collating, grouping, stapling, or hole

punching.

[Combine] Press this button to specify whether to combine pages.

Multiple pages of a document can be combined and printed on a single page.

[Zoom] Press this button to specify a zoom ratio for the document.

[Continuous Print] This function is available when printing combined documents in the 2-sided

print mode.

Multiple document are printed continuously when they are combined. When

printing in 2-Sided mode, an e front side of a sheet d the document ends on th

of paper, select whether to start printing of the next document on the back side

of the sheet or on the front side of a new sheet.

bizhub 423/363/283/223 6-15

6.3 Operating Image Panel

Specifying destinations

From [Destination List], select an address to which you want to send a document.

Press the [Search] tab to reference one-touch destinations registered in the main unit. Press the [Group] tab

to reference the group list registered in the main unit.

Reference

-If you have read multiple documents, the User Box function will not be available.

-If My address function is available, pressing [My Address] allows you to view My Address Book. For

details on the My Address function, refer to page 10-2.

-If you have specified an address, you can check the send tray by pressing [Verify Address Tray/ Remote

Address Setting].

-E-mail addresses for which a certificate is registered are displayed with a key icon.

-You can only specify User Boxes as an address book destination of a document retrieved from an ex-

ternal memory or a document saved in a cellular phone or PDA.

Saving a document in an external memory

Select [External Memory] from [Destination List], and press [OK].

Reference

- ö öTo save data in an external memory, in [Administrator Settings] [System Settings] [User Box Set-

tings]ö[External Memory Function Settings], set [Save Document] to [ON]. To additionally perform user

authentication, in [Administrator Settings] [User Authentication/ Account Track]ö ö[User Authentica-

tion Settings]ö[User Registration], set [Function Permission]ö[Save to External Memory] to [Allow] for

each user.

-If [Print] or a destination is specified as a destination, you cannot select [External Memory].

bizhub 423/363/283/223 6-16

6.3 Operating Image Panel

6.3.6 Checking the send tray

Send Tray

If you specify an address, the send tray appears. The send tray displays the icon for the destination you have

specified.

[Check TX Tray]

Press the icon of the send tray to display the Check Send To screen, where you can check the list of specified

destinations.

If an E-mail address is specified as a destination, you can specify settings for the E-mail encryption and digital

signature attachment.

No. Name Description

1 Dest. Settings icon Press the Dest. Settings icon to display the Check Send To screen, where

you can check the list of specified destinations.

2 Destination icon Displays the icons for destinations.

Press the icon for the desired destination to display the Check Send To

screen, where you can check the detail information of the destination.

Item Description

[Remote Address Set-

tings]

Press this button to configure settings for E-mail encryption based on S/MIME

and digital signature attachment.

This setting is available when [ON] is selected for [S/MIME Communication

Settings] of [Administrator Settings], and E-mail is selected.

[Detail] Press this button to check the detailed information of the address.

bizhub 423/363/283/223 6-17

6.3 Operating Image Panel

Reference

-To encrypt an E-mail message and attach a digital signature using S/MIME, set [Administrator Set-

tings]ö[Network Settings]ö[E-Mail Settings]ö[S/MIME Communication Settings] to [ON].

-To encrypt an E-mail, a certificate must be registered in the E-mail address.

-To attach a digital signature to an E-mail message, the device certificate must be registered in the MFP.

Also, set [Administrator Settings]ö[Network Settings]ö[E-Mail Settings]ö[S/MIME Communication

Settings]ö[Digital Signature] to [Always add signature] or [Select when sending]. For details, refer to

the [User's Guide Network Administrator].

6.3.7 Sending data from a cellular phone or PDA

Selecting a destination and pressing Start displays the PIN code on the Control Panel.

Specify the data you want to use and the MFP to send data in the cellular phone or PDA. Then enter the PIN

code to send data to the MFP.

Reference

-You can only specify either [Print] or a User Box as a destination for sending data from a cellular phone

or PDA. Also, you can specify only one User Box as a destination. To save a document in a User Box,

you must create a User Box and register the User Box in the address book in advance.

– For details on how to create a User Box, refer to the [User's Guide Box Operations].

– For details on how to register a destination to the address book, refer to the [User's Guide Network

Scan/Fax/Network Fax Operations].

-For the operation of a cellular phone or PDA, refer to the operation manual of the cellular phone or PDA.

-The communication speed may be reduced or communication may be interrupted by obstacles, signal

quality, magnetic field or static electricity.

-Documents and image data may not be sent correctly depending on the security setting of the cellular

phone or PDA.

[Delete] Press this button to delete the selected address.

Item Description

bizhub 423/363/283/223 6-18

6.4 Registering a photo in the address book

From the Web browser on your computer, you can use PageScope Web Connection to add photo data to

registered one-touch destinations.

The registered photo data is applied to the [Destination List] of Image Panel.

d Reference

For details on , refer to the [User's GuidPageScope Web Connection e Network Administrator].

6.4.1 Specifications of photo data

The specifications for registerable photo data are as shown below.

Reference

-Photo data is not enlarged or reduced during photo data registration process.

Item Specifications

File Type BMP format, 24-bit color, uncompressed

Image size 48 e 48 pixels

Data size 6,966 bytes

bizhub 423/363/283/223 6-19

6.4 Registering a photo in the address book

6.4.2 Registering photo data

Reference

-To add photo data to the address book, you must register one-touch destinations in advance.

-When the My Address function is available, you can add photo data to one-touch destinations in My

Address Book.

-Photo data can be registered in My Address Book only when you log in as a registered user.

1Log in to the user mode or administrator mode.

2Select [Store Address].

3Select [Photo/Icon].

4Select the one-touch destination to which you want to add photo data, and then click [Edit].

%When the photo data is registered, [Photo/Icon] is displayed in [Photo].

bizhub 423/363/283/223 6-20

6.4 Registering a photo in the address book

5Select [Register Photo].

6Click [Browse], and then specify the folder where the photo data you want to add is saved.

7Press [OK].

The photo data is added to the one-touch destination.

Specyfikacje produktu

Marka:	Konica Minolta
Kategoria:	drukarka
Model:	bizhub 283

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Konica Minolta bizhub 283, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje drukarka Konica Minolta

Konica Minolta bizhub 423 Instrukcja

12 Października 2024

Konica Minolta Bizhub 4402p Instrukcja

26 Września 2024

Konica Minolta Bizhub C654e Instrukcja

26 Września 2024

Konica Minolta CF 9001 Instrukcja

26 Września 2024

Konica Minolta Bizhub C458 Instrukcja

26 Września 2024

Konica Minolta Bizhub C3350i Instrukcja

26 Września 2024

Konica Minolta CF2001 Instrukcja

26 Września 2024

Konica Minolta Bizhub 4422 Instrukcja

25 Września 2024

Konica Minolta Bizhub C368 Instrukcja

25 Września 2024

Konica Minolta Bizhub C30P Instrukcja

25 Września 2024

Instrukcje drukarka

Najnowsze instrukcje dla drukarka

Mitsubishi P93E Instrukcja

9 Kwietnia 2025

Kyocera FS-6525MFP Instrukcja

9 Kwietnia 2025

Kyocera FS-9520DN Instrukcja

9 Kwietnia 2025

HP LaserJet CZ994A Instrukcja

9 Kwietnia 2025

Canon SELPHY QX20 Instrukcja

9 Kwietnia 2025

Canon Pixma GM4030 Instrukcja

4 Kwietnia 2025

Lexmark Forms 2590 Instrukcja

3 Kwietnia 2025

Olivetti Artjet 10 Instrukcja

3 Kwietnia 2025

Kyocera FS920 Instrukcja

3 Kwietnia 2025

Brother DCP-153C Instrukcja

2 Kwietnia 2025