Instrukcja obsługi Klipsch Icon Series X

Klipsch głośnik Icon Series X

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Klipsch Icon Series X (36 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/36

Icon Series

Owner's Manual

The exclamation point, within an equilateral triangle, is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the product.

The lightning flash with arrowhead symbol within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within

the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electrical shock to

persons.

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. DO NOT install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including

ampliﬁers) that produce heat.

9. DO NOT defeat the safety purpose of the polarized or

grounding type plug. A polarized plug has two blades with

one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wider blade or the

third prong is provided for your safety. If the provided

plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. PROTECT the power cord from being walked on or

pinched, particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11. ONLY USE attachments/accessories speciﬁed by the

manufacturer.

12. USE only with a cart, stand, tripod, bracket,

or table speciﬁed by the manufacturer, or sold

with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms

or when unused for long periods of time.

14. REFER all servicing to qualiﬁed service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as the power-supply cord or

plug is damaged, liquid has been spilled, objects have

fallen into the apparatus, the apparatus has been exposed

to rain or moisture, does not operate normally, or has been

dropped.

15. DO NOT expose this apparatus to dripping or splashing and

ensure that no objects ﬁlled with liquids, such as vases,

are placed on the apparatus.

16. To completely disconnect this apparatus from the AC

mains, disconnect the power supply cord plug from the AC

receptacle.

17. The mains plug of the power supply cord shall remain

readily operable.

Important Safety Information

These models are supplied with self-stick rubber feet to prevent

surface damage. (See Figure 1 for proper application.)

Bookshelf, Center and LCR Models

Thank you for your purchase of this Icon Series Loudspeaker. In

total, there are six models within the new Icon Series: the XF-48

fully-active ﬂoorstander, XL-23 left/center/right speaker, XL-12 left/

center/right speaker, XB-10 bookshelf/satellite speaker, as well as

the XW-500d and XW-300d subwoofers.

All of these speakers, except for the subwoofers, utilize a new wide

dispersion Tractrix® Horn-loaded tweeter with XT

TM technology.

This proprietary design diffuses sound in a smooth, enveloping

80-degree by 80-degree pattern from extremely thin cabinets. As

with all Klipsch horn-loaded technology, this version also produces

more output using less energy and delivers the company’s signature

dynamic sound.

Please be sure to ﬁll out the warranty card included with this manual

or online at www.klipsch.com so we are better able to serve you.

Icon Series Loudspeaker

WARNING:

To reduce the risk of fire or electrical shock, do not expose

this apparatus to rain or moisture.

WARNING: No naked ﬂame sources – such as candles – should be

placed on the product.

WARNING: This product is intended to be operated ONLY from the

AC Voltages listed on the back panel or included power supply of the

product. Operation from voltages other than those indicated may cause

irreversible damage to the product and void the product's warranty. The

use of AC Plug Adapters is cautioned because it can allow the product

to be plugged into voltages in which the product was not designed to

operate. If the product is equipped with a detachable power cord, use

only the type provided with your product or by your local distributor

and/or retailer. If you are unsure of the correct operational voltage,

please contact your local distributor and/or retailer.

CAUTION: Place the equipment near a main power supply outlet and

make sure that you can easily access the power breaker switch.

W A R N I N G

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this

equipment are hazardous to life. No user-serviceable parts inside.

Refer all servicing to qualified service personnel.

Please check promptly for any transit damage. Carefully unpack

your new speaker system and verify the components against the

packing list. In extreme circumstances, items may have become

damaged in transit. If any damage is discovered, notify the delivery

service and dealer where the system was purchased. Make a

request for inspection, and follow their instructions for evaluation.

Be sure to keep the product’s original shipping carton.

Inspection

Connecting

• Your loudspeakers are equipped with positive (Red) and negative

(Black) connection terminals on the rear of the cabinet. These

correspond to the positive and negative terminals on the

appropriate channel (left, right, center, rear etc.) of your ampliﬁer.

Your Icon loudspeakers will perform well in a variety of locations,

but best results will be achieved using the following guidelines:

Front Left and Right Speakers (See Figures 2A and 2B.)

• Place on a common wall 6 to 15 feet apart.

• If used in a home theater system, position the speakers

ﬂanking your video display.

• Position them equal distance from the back wall (if they are

not wall-mounted).

• Position them at the same height above the oor

(for non-ﬂoor standing models) with the high frequency

drivers at seated ear height.

• Angle speakers toward the listener and even with or forward

of any adjacent obstructions (if they are not wall-mounted).

• Placing them near a corner or wall provides the greatest

amount of bass while moving the speakers away from room

boundaries reduces bass energy.

• Asymmetrical placement of a pair of speakers from adjacent

side walls can smooth room-induced bass unevenness.

• Bookshelf models may be placed on shelves or optional ﬂoor stands.

• Experiment with the above guidelines to suit your taste and to

compensate for your room’s acoustic characteristics.

Room Placement

Center Channel Speakers (See Figures 2A, 2B and 3.)

• Place immediately above or below the center of your video display.

• These models are supplied with a tilt rod to compensate for

placements above or below seated ear height.

• Use the supplied rubber pad to protect the front bottom edge

of the speaker. (See Figure 3.)

Surround Channel Speakers (See Figures 2A, 2B and 3.)

• Place above seated ear height on side or rear walls

(approximately 4-5 feet above the ﬂoor) or on optional

ﬂoorstands.

• Attach wall bracket with an appropriately sized screw head

screwed into a wall stud or wall anchor with a suitable weight

bearing capacity. (See Figure 3.)

• See your Klipsch dealer for optional, adjustable wall mounts if

required. These mounts utilize the threaded bushings on the

rear of the cabinet.

Never use the wall bracket for mounting the speaker to

the ceiling.

On Wall Placement (See Figure 3.)

• Icon LCR and bookshelf models may be wall-mounted

using the included wall bracket.

Turn your ampliﬁer off before making any

connections.

Standard Connections (See Figure 4.)(All Models)

• All speakers in your system must be connected in phase with

the positive speaker terminal connected to the positive

ampliﬁer terminal. Repeat this for the negative speaker

terminal and ampliﬁer terminals. Most speaker wire has

distinguishing markings on the insulation of one of the

conductors to assist in correct hookup.

• Use 16 gauge (AWG), two conductor, copper wire at a

minimum and larger gauge wire for longer runs. The

connection terminals on your loudspeaker will accommodate

bare wire, and spade terminals.

Active Floorstander Connections

(See ﬁgure 5.)(XF-48 only)

Your ﬂoorstanding speakers have a built-in ampliﬁer that

needs to be connected to an AC outlet. Once plugged in, it

will be either ON or in STANDBY depending upon the position

of the AUTO POWER switch. You must unplug the power cord

from the AC outlet to completely turn off your speaker during

extended periods. (i.e. vacations.)

There are two methods of connection provided on the input panel

of the XF-48. One is a single RCA-jack that functions as a line-level

input and the other is a set of binding posts that function as a high-

level input. Both are provided in order to connect to a wide variety

of electronics. Depending upon your system, one or both of these

connections may be available.

Do not connect both the standard SPEAKER IN and

the LINE IN inputs at the same time as damage to

your equipment could result.

With all connection types, take care that there is no

contact between the positive and negative terminals

at the speaker and ampliﬁer. Damage to your equipment

may result.

In most applications, best performance will be attained by using

the line-level input. Additionally, there is a “Sensitivity” switch on

the input panel that will help match the line-level input signal to

the source connected. Below are the recommended connection

methods and sensitivity settings based upon the equipment

source:

• When using with a source that has line-level preouts such as

an A/V receiver or preampliﬁer, connect the XF-48 line-level

input to the line-level preouts of the source. In most cases,

the sensitivity switch should be set to “LOW”.

• In some instances, the source line-level voltage may be too

low to get full output from the XF-48. In those cases, set the

sensitivity switch to “HIGH”.

• If your source does not have line-level preouts, you may

connect the XF-48 to the source via the binding post high-

level inputs. In this manner, the speaker would be connected

to the ampliﬁer outputs as if it were a traditional passive

speaker. In most cases, the sensitivity switch should be set

to “LOW”.

In some rare cases, you may ﬁnd it necessary to connect the

XF-48 to the high-level binding posts and have the sensitivity

switch set to “HIGH”. In this manner, there may be slight audible

noise from the speaker at very low levels.

Specyfikacje produktu

Marka:	Klipsch
Kategoria:	głośnik
Model:	Icon Series X

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Klipsch Icon Series X, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje głośnik Klipsch

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025

Klipsch PIC-525-T-SC Instrukcja

15 Stycznia 2025

Klipsch KI-102-SMA-II Instrukcja

15 Stycznia 2025

Klipsch PIC-450-T Instrukcja

14 Stycznia 2025

Klipsch Synergy C-2 Instrukcja

14 Stycznia 2025

Klipsch Synergy F-2 Instrukcja

14 Stycznia 2025

Klipsch Synergy F-3 Instrukcja

14 Stycznia 2025

Klipsch Synergy C-3 Instrukcja

14 Stycznia 2025

Klipsch PIC-525-T Instrukcja

14 Stycznia 2025

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025

ION Insta Sound Instrukcja

15 Stycznia 2025

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025

Yamaha WX-010 Instrukcja

15 Stycznia 2025

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025

Power Dynamics PDW5W Instrukcja

15 Stycznia 2025

Edifier M1250 Instrukcja

14 Stycznia 2025