Instrukcja obsługi Klipsch G-16

Klipsch głośnik G-16

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Klipsch G-16 (20 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
Klipsch Gallery Series
Owner's Manual
™
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS!
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. ONLY USE attachments/accessories specified by the manufacturer.
10. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip over.
11. DO NOT expose this apparatus to dripping or splashing and ensure that no objects filled with
liquids, such as vases, are placed on the apparatus.
The exclamation point, within an equilateral triangle, is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in the
literature accompanying the product.
The lightning flash with arrowhead symbol within an equilateral triangle, is intended
to alert the user to the presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to constitute a risk of
electrical shock to persons.
WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.
WARNING: No naked flame sources – such as candles – should be placed on the product.
THANK YOU
Thank you for your purchase of the Klipsch Gallery™ Series speakers! Each
speaker blends versatile, superior styling with legendary Klipsch
® lifelike sound for
seamless integration into any décor. The G-12, G-16 and G-28 speakers are de-
signed to operate vertically or horizontally as left, center, right or surround speak-
ers while the G-42 soundbar combines the three front channels in one aesthetic
cabinet. Each model comes with a high quality, elegant, tempered glass base for
stand, table or bookshelf placement and keyhole mounts for on-wall placement.
PRODUCT REGISTRATION
Register your product online at www.klipsch.com/register
• Klipsch Group Inc, (KGI) will keep you up-to-date on new products and promotions
• Your personal information will never be resold
• This registration information is not used for warranty purposes.
Please retain your receipt for warranty claims.
ROOM PLACEMENT
Before You Start — Some Klipsch speakers have feet and other accessories
that may need to be installed prior to use.
Left and Right Main Channel Speakers — For the most spacious sound
KGI suggests placing the G-12, G-16 or G-28 front left/right speakers six
to 15 feet (2 to 4.5m) apart with the listening position about 1 to 1.5 times the
distance separating the speakers. Excellent sound can still be achieved by
placing/wall-mounting these speakers close to both sides of your TV if that is
more aesthetically pleasing.
Center Channel Speakers — Speakers used as center channel speakers are
designed to place dialogue and primary sounds so that they appear to come
from the video screen. These speakers should therefore be placed/
wall-mounted horizontally, as close to the screen as possible, preferably at least
1" directly below the screen. The G-42 three-channel soundbar should also be
placed/wall-mounted this way.
Rear Surround Channel Speakers — Speakers used as surround speakers
should be placed approximately 2 feet above the listening position. Typically this
will be about 5-7 feet above the floor. The surrounds should be placed on the
walls directly adjacent to the listening position. Another option would be on the
wall behind the listening position. The final surround speaker placement depends
on your room’s characteristics.
SPEAKER/SOUNDBAR PEDESTAL INSTALLATION
If you place your G-12,G-16,G-28 speakers or G-42 soundbar on a stand, table,
etc. (vs. mounting on the wall), you will need to attach the provided tempered
glass pedestals with the included screws.
Before you attach a pedestal, have the speaker wire that will attach to that speaker
available since attaching the pedestal and connecting the speaker wire to a speaker
are done at the same time (see “Connecting” section for proper wire connection).
The G-12, G-16 and G-28 speakers can be attached vertically or horizontally onto
their pedestals and, therefore, have threaded inserts in two different positions on
the rear of these speakers. The G-42 soundbar can only be attached horizontally
to its pedestal. Attach the pedestal as follows:
1. Insert speaker wires (one set for G-12, G-16 and G-28 and three sets, left,
right and center channel for G-42 soundbar) inside hole in pedestal back
and pull through pedestal top (See Diagram 2).
2. Position speaker/soundbar on ridge on pedestal top, lining up the holes in
the top with the threaded inserts on the speaker (the G-12 has just one
insert when in horizontal position and it should lineup with left hole on
pedestal top). (See Diagram 2)
3. Using a Phillips screwdriver, screw the screws partially into the speaker
inserts, without tightening them. (See Diagram 2)
4. If vertical mounting, attach speaker wires (see Diagram 1), adjust wires
to fit in recessed area around terminals and tighten Phillips screws on
pedestal. , route speaker wire from the rear center If horizontal mounting
of speaker through channel(s) to the speaker terminals, attach speaker
wires in same manner as vertical mounting, then tighten Phillips screws on
pedestal. With the G-42 soundbar, use both channels to route all three sets
of wires to the speaker terminals. (See Diagram 3) (Note: using speaker
wire larger than 18 gauge on the G-42 may not allow wire(s) to com-
pletely fit in channels). If needed, use the included adhesive strip to hold
excess wire in place. To change the Klipsch logo direction on the speaker
front pull out one side of it and rotate 45˚.gently
C A U T I O N
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
WARNING: Do Not Open! Risk of Electrical Shock. Voltages in this
equipment are hazardous to life. No user-serviceable parts inside.
Refer all servicing to qualified service personnel.

Specyfikacje produktu

Marka: Klipsch
Kategoria: głośnik
Model: G-16

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Klipsch G-16, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Klipsch

Klipsch

Klipsch R50-PM Instrukcja

8 Października 2024
Klipsch

Klipsch Flexus Core 100 Instrukcja

5 Października 2024
Klipsch

Klipsch Flexus Sub 100 Instrukcja

5 Października 2024
Klipsch

Klipsch Flexus Core 200 Instrukcja

5 Października 2024
Klipsch

Klipsch R-50M Instrukcja

5 Października 2024
Klipsch

Klipsch Palladium P-38F Instrukcja

5 Października 2024
Klipsch

Klipsch PRO-800SW Instrukcja

4 Października 2024
Klipsch

Klipsch DS-160CDT Instrukcja

4 Października 2024
Klipsch

Klipsch DS-160C Instrukcja

4 Października 2024
Klipsch

Klipsch THX-6000-LCR-L Instrukcja

4 Października 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024