Instrukcja obsługi Klipsch AWR-650-SM

Klipsch głośnik AWR-650-SM

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Klipsch AWR-650-SM (4 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

AWR-650-SM

Owner's Manual

–

White

Red

Black

Green

Klipsch All-Weather Rock Speakers

Thank you for your purchase of this Klipsch Rock Speaker. The

Klipsch All-Weather Rock speaker (AWR-650-SM) is a two-way, dual

channel design using a single high performance bass driver for the low

frequencies and a pair of Polymer dome high frequency tweeters for

wide, even coverage.

The AWR-650-SM can be configured as a single two channel speaker

or used in pairs as a single channel speaker. The AWR-650-SM is

constructed of durable weather proof materials such as a fiberglass

enclosure and powder coated aluminum grilles, a polymer woofer

cone and polymer dome tweeters. This ensures that the speaker will

look and sound good for years to come regardless of environmental

extremes.

Please be sure to fill out the warranty card included with this manual or

online at www.klipsch.com so we are better able to serve you.

Placement

The Klipsch All-Weather Rock speaker is perfect for lawns, gardens,

patios, decks or any other place where exposure to the elements

makes conventional loudspeaker usage unsuitable. Due to its aesthetic

design and up-tilted orientation, this model is designed for low or

ground level placement.

To achieve the best performance from a pair of AWR-650-SMs place

them on the same side of your intended listening area and space them

8 to 20 feet apart. For a higher quality stereo image some degree of

toe-in, toward the primary listening area, may be required to achieve

the desired effect.

If a single AWR-650-SM is connected in a two channel configuration it

is best to center the speaker on the preferred side for even coverage.

Some additional Bass will result if you place the speakers in a corner

or near a wall.

Connections

Important:

Proper connection of your speakers to your

amplifier is vital to obtaining good sound quality. Please

follow these directions carefully.

The AWR-650-SM is provided with a 4-conductor cable to be able to

connect either 1 or 2 channels. One input uses RED for positive and

GREEN for negative, the other uses WHITE for positive and BL ACK

for negative. When connecting only 1 channel to the AWR-650-SM

the RED and WHITE must be connected together for positive and

BLACK and GREEN together for negative. Positive(s) and negative(s)

on the speaker must be connected to the positive(s) and negative(s)

respectively for your receiver/amplifier for correct phasing.

Important:

Each channel on the AWR-650-SM has 8

ohm impedance. When joining the inputs for a 1 channel

connection as previously described and shown below, the

AWR-650-SM becomes a 4 ohm speaker. Make sure your

receiver/amplifier can accept a 4 ohm (which most can).

2 Channel Wiring

1 Channel Wiring

Wire Splicing

Unless the AWR-650-SM will be connected to an amplifier/receiver

directly using the 5’ lead, wire splicing to a separate set of high quality,

moisture resistant speaker cable will be required. Follow the following

steps to connect the AWR-650-SM to an amplifier/receiver as a single

channel speaker.

1. Strip away two to three inches of the AWR-650-SM 5' speaker lead

outer jacket away from the individual insulated conducts.

2. Strip one half inch from each of the 4 individual conductors.

3. Twist together the stripped ends of the AWR-650-SM BL ACK

(negative) wire AND the AWR-650-SM GREEN (negative) wire AND

the stripped end of the speaker wire connected to the negative

output of the desired channel of the amplifier/receiver.

4. Cap the three wire combination with a silicon filled wire nut. The

material inside the wire nut will protect the stripped ends of the wire

from moisture. If additional protection is desired, additional silicon

(sold separately) can be added to the bottom of the wire nut to

further seal the connection.

5. Repeat steps 3 & 4 for the positive connection of the same channel

using the AWR-650-SM RED (positive) wire AND the AWR-650-SM

WHITE (positive) wire and speaker wire connected to the positive

output of the amplifier/receiver.

To connect the AWR-650-SM as a dual channel stereo speaker

two additional wire nuts will be required (sold separately). Make 4

individual splices, referring to the diagram above, and always double

check that the positive leads of the AWR-650-SM are connected to

the positive outputs of the amplifier/receiver and the negative leads

of the AWR-650-SM are connected to the negative outputs of the

amplifier/receiver.

WARNING:

If channel 1 and 2 are wired out of phase,

the woofer will make little to no sound. This can damage the

woofer if left wired in this manner.

–

Green

Red

Black

White

Right Channel

Left Channel

Important: Before burying any portion of the completed

speaker assembly, verify the location of gas lines or buried

utility cables with your local utility company(s).

Important: Before running speaker cable through walls,

under patios or walkways, etc., check local building code

requirements. If you are not comfortable with any portion of the

installation, hire a qualified installer to perform those functions.

Securing Speaker

The AWR-650-SM includes a security eyelet on the underside of the

speaker. This permanent eyelet can be used to attach a security cable

or small chain for the added security.

Simply loop the security cable or chain through the eyelet underneath

the speaker enclosure and attach the other end to a fixed object.

Maintenance and Care

Your AWR-650-SM is designed to withstand the elements and be

placed outdoors year round. If cleaning is desired, simply use a damp

cloth to wipe down the outer surface of the speaker. Using chemical

cleaners is not recommended. Avoid spraying water from a hose or

sprinkler since this could damage speaker components, especially the

high performance tweeters. Cover the AWR-650-SM when applying

lawn fertilizer and chemicals.

Important: No user-serviceable parts inside. Refer all

servicing to qualified service personnel.

Limited Lifetime Warranty for Klipsch-Branded

In-Wall, In-Ceiling and Outdoor Speakers

Klipsch warrants to the original retail purchaser that this product is to

be free from defective materials and workmanship for the life of the

product, if it is properly used and maintained. If this product proves

defective in either material or workmanship, Klipsch, at its option,

will (a) repair the product, or ( b) replace the product, at no charge for

parts or labor. If the product model is no longer available and cannot

be repaired effectively or replaced with an identical model, Klipsch at

its sole option may replace the unit with a current model of equal or

greater value. In some cases, modification to the mounting surface

may be required where a new model is substituted. Klipsch assumes

no responsibility or liability for such modification. To obtain a repair

or replacement under the terms of this warranty, please contact our

customer service group at 1-800-KLIPSCH. You will be required to

submit a copy of the original receipt via fax or email. The receipt must

reflect that you are the original purchaser, the product was bought from

an authorized Klipsch retailer, and the product is still within warranty.

You will be issued a return authorization number (RA#) and asked to

ship the defective product, together with proof of purchase and RA#,

prepaid insured to the address set forth Klipsch: 137 Heampstead #278

Hope, AR 71801. Freight collect shipments will be refused. Risk of loss or

damage in transit is to be borne by the purchaser. Once Klipsch receives

the defective product, a repair or replacement order will be initiated.

Limitations:

• This limited warranty does not cover failure of the product

resulting from improper installation, misuse, abuse, acci-

dent, neglect, mishandling, or wear from ordinary use or

environmental deterioration.

• This limited warranty does not cover cosmetic damage,

including paint damage, or consequential damage to other

components or premises which may result for any reason

from the failure of the product.

• This limited warranty is null and void for products not used

in accordance with Klipsch’s instructions.

• This limited warranty is null and void for products with

altered or missing serial numbers and for products not pur-

chased from an authorized dealer.

• This limited warranty terminates if you sell or otherwise

transfer this product to another party.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND

YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE

TO STATE, JURISDICTION TO JURISDICTION OR COUNTRY TO

COUNTRY. KLIPSCH’S RESPONSIBILITY FOR MALFUNCTIONS AND

DEFECTS IN HARDWARE IS LIMITED TO REPLACEMENT OR REPAIR

AS SET FORTH IN THIS WARRANTY STATEMENT. FOR CANADIAN

CUSTOMERS, KLIPSCH DISCL AIMS ALL OTHER WARR ANTIES AND

CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE,

FOR THE PRODUCT. FOR U.S. CUSTOMERS, ALL EXPRESS AND

IMPLIED WARR ANTIES FOR THE PRODUCT, INCLUDING BUT NOT

LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILIT Y

AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN TIME

TO THE TERM OF THIS WARRANT Y. SOME STATES, JURISDICTIONS

OR COUNTRIES DO NOT ALLOW THE EXCLUSION OF CERTAIN

IMPLIED WARR ANTIES OR CONDITIONS, OR LIMITATIONS ON

HOW LONG AN IMPLIED WARRANTY OR CONDITIONS LASTS, SO

THIS LIMITATION MAY NOT APPLY TO YOU. KLIPSCH DOES NOT

ACCEPT LIABILITY FOR SPECIA L, INDIRECT, CONSEQUENTIAL OR

INCIDENTAL DAMAGES, INCLUDING WITHOUT LIMITATION, ANY

LIABILIT Y FOR THIRD PART Y CLAIMS AGAINST YOU FOR DAMAGES

OR FOR PRODUCTS NOT BEING AVAILABLE FOR USE. THE MAXIMUM

LIABILIT Y FOR WHICH KLIPSCH MAY BE RESPONSIBLE WILL BE NO

MORE THAN THE AMOUNT YOU PAID FOR THE PRODUCT THAT IS

THE SUBJECT OF THE CL AIM. SOME STATES, JURISDICTIONS OR

COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF

SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES,

SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

Warranty Outside the U.S. and Canada

The Warranty on this product if it is sold to a consumer outside of the

United States and Canada shall comply with applicable law. To obtain

any applicable warranty service, please contact the dealer from which

you purchased this product, or the distributor that supplied this product.

Security

Eyelet

Specyfikacje produktu

Marka:	Klipsch
Kategoria:	głośnik
Model:	AWR-650-SM

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Klipsch AWR-650-SM, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje głośnik Klipsch

Klipsch Reference RB-25 Instrukcja

15 Stycznia 2025

Klipsch Reference RB-35 Instrukcja

15 Stycznia 2025

Klipsch PIC-525-T-SC Instrukcja

15 Stycznia 2025

Klipsch KI-102-SMA-II Instrukcja

15 Stycznia 2025

Klipsch PIC-450-T Instrukcja

14 Stycznia 2025

Klipsch Synergy C-2 Instrukcja

14 Stycznia 2025

Klipsch Synergy F-2 Instrukcja

14 Stycznia 2025

Klipsch Synergy F-3 Instrukcja

14 Stycznia 2025

Klipsch Synergy C-3 Instrukcja

14 Stycznia 2025

Klipsch PIC-525-T Instrukcja

14 Stycznia 2025

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Bowers & Wilkins LCR3 Instrukcja

15 Stycznia 2025

Hifonics Vulcan VX6.2E Instrukcja

15 Stycznia 2025

Pyle PLRGSW64BK Instrukcja

15 Stycznia 2025

ION Insta Sound Instrukcja

15 Stycznia 2025

Pure Acoustics QBT-340 Instrukcja

15 Stycznia 2025

Yamaha WX-010 Instrukcja

15 Stycznia 2025

Polk REACT SOUND BAR 1 Instrukcja

15 Stycznia 2025

Sennheiser AMBEO Soundbar Plus SB02M Instrukcja

15 Stycznia 2025

Power Dynamics PDW5W Instrukcja

15 Stycznia 2025

Edifier M1250 Instrukcja

14 Stycznia 2025