Instrukcja obsługi KitchenAid KMHS120EWH

KitchenAid Magnetostrykcja KMHS120EWH

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla KitchenAid KMHS120EWH (12 stron) w kategorii Magnetostrykcja. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
MICROWAVE HOOD COMBINATION
INSTALLATION INSTRUCTIONS
This product is suitable for use above electric or gas cooking products up to and including 36" (91.4 cm) wide. See “Installation
Requirements” section for further notes.
These installation instructions cover different models. The appearance of your particular model may differ slightly from the illustration
in these installation instructions.
Table of Contents
MICROWAVE HOOD COMBINATION SAFETY
You can be killed or seriously injured if you don't immediately
You can be killed or seriously injured if you don't follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
MICROWAVE HOOD COMBINATION SAFETY ......................................... 1
INSTALLATION REQUIREMENTS .............................................................. 2
Tools and Parts ......................................................................................... 2
Location Requirements ............................................................................ 2
Product Dimensions ................................................................................. 3
Electrical Requirements ............................................................................ 3
INSTALLATION INSTRUCTIONS ................................................................ 4
Remove Mounting Plate ........................................................................... 4
Rotate Blower Motor ................................................................................ 4
Locate Wall Stud(s) ................................................................................... 6
Mark Rear Wall .......................................................................................... 7
Drill Holes in Rear Wall.............................................................................. 7
Attach Mounting Plate to Wall .................................................................. 8
Prepare Upper Cabinet ............................................................................. 8
Install Damper Assembly .......................................................................... 9
Install the Microwave Oven ...................................................................... 9
Complete Installation .............................................................................. 10
VENTING DESIGN SPECIFICATIONS ...................................................... 11
ASSISTANCE 12 .............................................................................................
Replacement Parts ................................................................................. 12
Accessories............................................................................................. 12
W10823835A
2
INSTALLATION REQUIREMENTS
Tools and Parts
Tools Needed:
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Parts Supplied:
For information on reordering, see “Replacement Parts” section.
NOTE: The hardware items listed here are for wood studs.
For other types of wall structures, be sure to use
appropriate fasteners.
NOTE: Depending on model, aluminum grease filter
and charcoal filter may be combined.
Materials needed:
■Standard fittings for wall or roof venting.
See “Venting Design Specifications” section.
Location Requirements
Check the opening where the microwave oven will be installed.
The location must provide:
■Minimum installation dimensions. See “Installation
Dimensions” illustration.
■Minimum one 2" x 4" (50.8 x 101.6 mm) wood wall stud
and minimum 3/8" (10 mm) thickness drywall or plaster/lath
within cabinet opening.
■Support for weight of 150 lbs (68 kg), which includes
microwave oven and items placed inside the microwave
oven and upper cabinet.
■Grounded electrical outlet inside upper cabinet. See
“Electrical Requirements” section.
NOTES:
■If installing the microwave oven near a left sidewall, make
sure there is at least 6" (15.2 cm) of clearance between the
wall and the microwave oven, so that the door can open fully.
■Some cabinet and building materials are not designed
to withstand the heat produced by the microwave oven
for cooking. Check with your builder or cabinet supplier
to make sure that the materials used will not discolor,
delaminate or sustain other damages.
Special Requirements
For Wall Venting Installation Only:
■Cutout must be free of any obstructions so that the vent
fits properly, and the damper blade opens freely and fully.
For Roof Venting Installation Only:
■If you are using a rectangular to round transition piece,
the 3" (7.6 cm) clearance needs to exist above the
microwave oven so that the damper blade can open
freely and fully. See “Rectangular to Round Transition”
illustration in “Venting Design Specifications” section.
■Measuring tape
■Pencil
■Masking tape or
thumbtacks
■Scissors
■No. 2 Phillips screwdriver
■No. 3 Phillips screwdriver
for 1/4-20 x 3" bolts
■Drill
■3/16" (5 mm), 3/8" (10 mm),
5/8" (16 mm) drill bits
■3/4" (19 mm) hole saw
■Diagonal wire cutting pliers
■Stud finder
■7/16" socket wrench
(or box wrench) for
1/4" x 2" lag screws
■11/2" (3.8 cm) diam.
hole drill bit for wood
or metal cabinet
■Keyhole saw
■Caulking gun and
weatherproof caulking
compound
■Duct tape
A B C D E F G
H
A. 3/16-24 x 3" round-head bolts (2)
B. 1/4-20 x 3" flat-head bolts (2)
C. Washers (2)
D. 3/16" toggle nuts (2)
E. 1/4" x 2" lag screws (2)
F. Sheet metal screws (2)
G. Power supply cord bushing (1)
H. Damper assembly (for wall
or roof venting)
Not Shown:
Upper cabinet template
Mounting plate (attached
to back of microwave oven)
Wall template
Aluminum grease filters
Charcoal filters (Depending
on model, charcoal filters
may not be included.
See User Instructions.)
3
Installation Dimensions:
NOTE: The grounded 3 prong outlet must be inside the
upper cabinet. See “Electrical Requirements” section.
* 30" (76.2 cm) is typical for 66" (167.6 cm) installation
height. Exact dimensions may vary depending on type
of range/cooktop below.
Product Dimensions
* Overall depth of product will vary slightly depending
on door design.
Electrical Requirements
Observe all governing codes and ordinances.
Required:
■A 120 volt, 60 Hz, AC only, 15- or 20-amp electrical supply
with a fuse or circuit breaker.
Recommended:
■A time-delay fuse or time-delay circuit breaker.
■A separate circuit serving only this microwave oven.
12" (30.5 cm) min.
14" (35.6 cm) max.
30"
(76.2 cm)
min.
A B
upper cabinet and
side cabinet depth
30"
(76.2 cm)
typical*
66" (167.6 cm) min.
A. 2" x 4" wall stud
B. Grounded 3 prong outlet
29⁷⁄₈" (76.0 cm)
17¹⁄₈"
(43.5 cm)
+/- ³⁄₁₆"
(0.5 cm)
16¹⁄₄"
(41.3 cm)
Up to
16³⁄₄"
(42.5 cm)*
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
WARNING
GROUNDING INSTRUCTIONS
SAVE THESE INSTRUCTIONS
■ For all cord connected appliances:
The microwave oven must be grounded. In the event of
an electrical short circuit, grounding reduces the risk of
electric shock by providing an escape wire for the electric
current. The microwave oven is equipped with a cord
having a grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly installed
and grounded.
WARNING: Improper use of the grounding plug can
result in a risk of electric shock. Consult a qualified
electrician or serviceman if the grounding instructions are
not completely understood, or if doubt exists as to whether
the microwave oven is properly grounded.
Do not use an extension cord. If the power supply cord is
too short, have a qualified electrician or serviceman install
an outlet near the microwave oven.

Specyfikacje produktu

Marka: KitchenAid
Kategoria: Magnetostrykcja
Model: KMHS120EWH

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z KitchenAid KMHS120EWH, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Magnetostrykcja KitchenAid

KitchenAid

KitchenAid KMMS130RPS Instrukcja

11 Lutego 2025
KitchenAid

KitchenAid KHMS147HBL2 Instrukcja

12 Stycznia 2025
KitchenAid

KitchenAid KMCS122RSS Instrukcja

9 Października 2024
KitchenAid

KitchenAid KMCS122RBS Instrukcja

8 Października 2024
KitchenAid

KitchenAid KMCM 3825 Instrukcja

6 Października 2024
KitchenAid

KitchenAid UMC5165AS Instrukcja

28 Września 2024
KitchenAid

KitchenAid KMHC319LWH Instrukcja

23 Września 2024
KitchenAid

KitchenAid MK2220AW Instrukcja

11 Września 2024
KitchenAid

KitchenAid KMBT5011KS Instrukcja

8 Września 2024
KitchenAid

KitchenAid MK2167AZ Instrukcja

7 Września 2024

Instrukcje Magnetostrykcja

Najnowsze instrukcje dla Magnetostrykcja

Goodmans

Goodmans 300948 Instrukcja

23 Marca 2025
CATA

CATA MC 25 ALV BK Instrukcja

17 Marca 2025
Goodmans

Goodmans 300946 Instrukcja

15 Marca 2025
Goodmans

Goodmans 300943 Instrukcja

14 Marca 2025
Goodmans

Goodmans 305822 Instrukcja

11 Marca 2025
Melissa

Melissa 16330105 Instrukcja

9 Marca 2025
StarQ

StarQ MWM2320 Instrukcja

6 Marca 2025
Whirlpool

Whirlpool WMN461BXF Instrukcja

5 Marca 2025
Whirlpool

Whirlpool WMD6O4TBF Instrukcja

5 Marca 2025
LG

LG MSER1130B Instrukcja

3 Marca 2025