Instrukcja obsługi Kicker SX900.2

Kicker Radia samochodowe SX900.2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kicker SX900.2 (20 stron) w kategorii Radia samochodowe. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
3
SX .2 Series Amplifiers
Features
Features
Low Impedance Operation Stable into 2 ohm stereo
or 4 ohm mono loads.
SORT Protection Circuitry (S Ohort circuit, ver-voltage,
Reverse polarity, hermal) Protects amplifier from accidentsT
and out of spec operation.
MOSFET Power Supply Provides high efficiency
operation.
PAST ( mp ignal Pre A S Transfer) Output RCA jacks to pass the
incoming signal to another amplifier or component.
SAMS (S A M Stereo nd ono imultaneously) Amplifier will
operate into a bridged mono load and a stereo load at the
same time.
Low Pass Filter Fully adjustable digital crossover with
variable slope and crossover frequency. 30 Hz - 20 kHz in 1/12
octave spacing. OFF - 36 dB per octave slope in 6 dB incre-
ments.
High Pass Filter Fully adjustable digital crossover with
variable slope and crossover frequency. 10 Hz - 16 kHz in 1/12
octave spacing. OFF - 36 dB per octave slope in 6 dB incre-
ments.
KickEQ Fully adjustable single band digital parametric equal-
izer with variable Q (bandwidth), variable center frequency and
variable boost or cut. Q range .5 - 10 in .5 steps. Center
frequency 20 Hz - 20 kHz in 1/12 octave steps. Boost or cut
range +/- 18 dB.
Adjustable Phase The output phase of each channel can
be set at 0 Degrees or 180 Degrees. Left and Right channels
can be linked or independently adjusted.
UltraMatch Gain Structure Digital input gain control
with five selectable gain ranges (1 volt, 2 volt, 4 volt, 8 volt, 16
volt) with 12 dB of adjustment in each range in .5 dB steps.
Left and Right channels can be linked or adjusted independ-
ently.
SickBay and On Board Diagnostics Various tools to
troubleshoot installation issues and check amp status.
Kompressor A 4-setting, user-selectable bass compressor
used to fatten up your sub bass. OFF, TIGHT, CONTOUR and
ATTACK with +/- 24 dB of adjustment to compensate for
speaker size or listening style.
ISIS I S I S(pronounced eye-sis) ( ndicate tatus & nput ettings)
The user interface to view or adjust current settings and check
the status of your Kicker SX amplifier.
BLAST Port (B L A S Tass evel nd ignal ransfer) Provides
Remote Bass Level Control and control signal transfer
between multiple SX amplifiers.
EndKaps Cast aluminum, custom, removable covers to pro-
tect and hide all your wiring connections to the amplifier. Can
be prepped and painted any custom color you choose.
SASA (S A Shake tick A ) t So many more features...it is more
than you can Shake A Stick At. (It’s an Oklahoma thing!) Read
on to find out!
2SX .2 Series Amplifiers
Introduction
SX400.2 / SX500.2 / SX600.2 / SX900.2
SX .2 Series
Amplifier
Owners Manual
Two Channel Models:
Attention:
Please take a moment and record the information
asked for below in the provided area. It is also a good
idea to attach the original sales receipt or a copy of it to
this page for future reference
If for any reason you require service on this amplifier
during the warranty period, you will need to provide this
information and a copy of the receipt to Kicker to vali-
date your warranty.
ALWAYS KEEP YOUR RECEIPT!
Dealer Where Purchased:
Purchase Date:
Amplifier Model Number:
Amplifier Serial Number:
Congratulations!
You have just purchased the latest in amplifier
technology to carry the famous KICKER name.
Your KICKER SX series amplifier employs the lat-
est in DSP signal processing to give you total
control over your sound. Like all KICKER prod-
ucts it is designed and built to give you years
of powerful and trouble-free performance.
This installation manual contains valuable infor-
mation on how to get the most out of your
new SX series amplifier.
Thanks for buying KICKER. Enjoy!
_____________________________________________
_____________________________________________
_____________________________________________
_____________________________________________
5
SX .2 Series Amplifiers
Features
VFD DISPLAY - cont
GAIN - Indicates you are in the gain menu.
EQ - Indicates you are in the equalizer menu.
LPF - Indicates you are in the low pass filter menu.
HPF - Indicates you are in the high pass filter menu.
PHASE - Indicates you are in the phase menu.
KOMP - Indicates you are in the Kompressor menu.
MEM-1 - Memory preset 1 activated.
MEM-2 - Memory preset 1 activated.
MEM-3 - Memory preset 1 activated.
MEM-4 - Memory preset 1 activated.
KEYPAD
The keypad consists of nine buttons that allow you to adjust
your amplifier.
M1 - Used to select memory preset 1 or to store cur-
rent settings into preset 1.
M2 - Used to select memory preset 2 or to store
current settings into preset 2.
M3 - Used to select memory preset 3 or to store
current settings into preset 3.
M4 - Used to select memory preset 4 or to store
current settings into preset 4.
ESC - Used to exit the current menu.
ENT - Used to enter the selected menu.
HOME - Used to return to the Main menu and
other functions explained later.
UP - Used to advance up through menu selections
and/or adjust amplifier controls.
DOWN - Used to advance down through menu
selections and/or adjust amplifier controls.
These controls and their usage will be explained later with
more detail in each menu usage section.
ESC
M2
M3
M4
ENT
HOME
M1
4SX .2 Series Amplifiers
Features
ISIS VFD Display
SYS
MEM-1
GAIN EQ LPF HPF KOMP
AMP1
LOCK
MEM-2 MEM-3 MEM-4
PHASE
MUTE
AMP2
LEFT RIGHT
* * kicker
Meet the interface (Indicate Status & Input Settings).ISIS
The ISIS (pronounced eye-sis) allows you to view the cur-
rent conditions and settings of your amplifier as well as
change the many user-adjustable settings.The ISIS system
consists of the VFD (Vacuum Fluorescent Display) and the nine
soft touch buttons that make up the KEYPAD.
M1 M2 M3 M4
ESC ENTHOME
SYS
MEM-1
GAIN EQ LPF HPF KOMP
AMP1
LOCK
MEM-2 MEM-3 MEM-4
PHASE
MUTE
AMP2
LEFT RIGHT
* * kicker
ISIS
VFD
ISIS
KEYPAD
Here is a brief description of the indicators found on the
VFD.
AMP1 - Indicates amplifier 1 is selected for adjustment. Only
available in four channel amps.
AMP2 - Indicates amplifier 2 is selected for adjustment.
Only available in four channel amps.
LOCK - Indicates the amplifier controls are locked out and
not usable.
LEFT - Indicates an action or adjustment of the left channel.
SYS - Indicates you are in the system menu.
RIGHT - Indicates an action or adjustment of the right
channel.
MUTE - Indicates you are in the mute menu or the mute
function is active.

Specyfikacje produktu

Marka: Kicker
Kategoria: Radia samochodowe
Model: SX900.2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kicker SX900.2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Radia samochodowe Kicker

Kicker

Kicker KX300.4 Instrukcja

4 Października 2024
Kicker

Kicker IX 1302 Instrukcja

1 Października 2024
Kicker

Kicker KX100.2 Instrukcja

29 Września 2024
Kicker

Kicker X50 Instrukcja

25 Września 2024
Kicker

Kicker zx 350 2 Instrukcja

24 Września 2024
Kicker

Kicker KX 400.4 Instrukcja

24 Września 2024
Kicker

Kicker ZX 300.1 Instrukcja

23 Września 2024
Kicker

Kicker kx 600 1 Instrukcja

23 Września 2024
Kicker

Kicker zr 120 Instrukcja

23 Września 2024
Kicker

Kicker KX 800.4 Instrukcja

23 Września 2024

Instrukcje Radia samochodowe

Najnowsze instrukcje dla Radia samochodowe

Boss

Boss MR63UAB Instrukcja

11 Grudnia 2024
Alpine

Alpine MRP-M850 Instrukcja

8 Grudnia 2024
Alpine

Alpine CTA-1505R Instrukcja

8 Grudnia 2024
Pioneer

Pioneer AVH-A240DAB Instrukcja

7 Grudnia 2024
Pyle

Pyle PLMR14BW Instrukcja

6 Grudnia 2024
Pyle

Pyle PLTS73FX Instrukcja

6 Grudnia 2024
Pyle

Pyle UPLMR15BW Instrukcja

6 Grudnia 2024
Pyle

Pyle PLTS79DUB Instrukcja

6 Grudnia 2024
Pyle

Pyle PLMR7BTW Instrukcja

6 Grudnia 2024
Audio-Technica

Audio-Technica AT-RX80 Instrukcja

6 Grudnia 2024