Instrukcja obsługi Kicker KST254

Kicker głośnik KST254

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kicker KST254 (10 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/10
KS
KSTWEETERS
KS KS KS25, 20, 13
©2007 Stillwater Designs
English Version
Versión Español
Tweeters KS
Manual del Propietario
Deutsche Version
KS-Hochtöner
Benutzerhandbuch
Version Française
Haut-parleurs d’aigus KS
Manuel d'utilisation
2008 KS Tweeters 4in1 a01.qxp 11/29/2007 4:09 PM Page 1
The Kicker KS series tweeters are specifically designed to bring out the high frequency
definition of your vehicle’s audio system. The KS tweeters can easily replace stock tweeters
in factory locations and offer several mounting options to deliver a wide range of
applications for custom installations.
Location
Your Kicker KS Tweeters can be mounted in several locations throughout your vehicle. The
easiest way to improve the high frequency response of your car stereo system is to replace
the OEM tweeters in their original factory location. There are several other places tweeters
can be custom mounted in your vehicle. The most common locations for tweeter mounting
are in the door, the sail panel, the dash, the kick panel, and in the A-pillars. See Figure 1.
Mounting the tweeter near the woofer maintains a more cohesive sonic response between
the lows and the highs, but tweeters are often mounted in a higher location in the vehicle to
elevate the sound stage.
INSTALLATION
Congratulations on your
KICKER purchase
Please record your purchase
information and keep your sales
receipt for validation of warranty.
Authorized Kicker Dealer:
Purchase Date:
Speaker Model Number:
_________________________
_________________________
_________________________
2
INSTALLATION
KSTweeters
Owner’sManual
KS KS KS25 /20 /13
Models:
KSTWEETERS 3
F u ig re 2
F ul sh Mount
S r a eu f c Mount
Shorter
Mounting Nut
S r a eu f c Mount Cup
Panel
Panel
Tweeter Flange
Tweeter
Tweeter
F uig re 3
M3 Screw
TweeterMounting
The tweeter can be mounted one of three ways: flush, surface, and angled mounting. For
flush mounting applications, please refer to the illustration in Figure 2. Choose a flat location
on the panel with space behind the panel to allow room for the mounting nut and motor
structure. After checking the clearances, cut the recommended diameter mounting hole in
the panel. Position the shorter mounting nut behind the panel. Use the longer mounting nut
if the panel’s thickness prohibits the use of the shorter mounting nut. Feed the wire through
the optional tweeter flange, the hole in the panel, and the mounting nut. Mount the tweeter
by screwing the mounting nut onto the tweeter.
For surface mounting applications use the surface mount cup as a template and pre-drill
one 7/64” (2.5mm) screw hole for attaching the surface mount cup to the panel, and a
5/16” (8mm) hole for the wires. A M3 pan-cross head wood screw is supplied to attach the
surface mount cup to the panel. Position the tweeter over the surface mount cup and press
it into position. See Figure 3.
For angled mounting applications choose a flat location on the panel with space behind the
panel to allow room for the longer mounting nut and back angle ring. After checking the
clearances, cut the recommended diameter mounting hole in the panel. Place the front
angle ring (does not fit through the longer tweeter mounting nut) in front of the panel. Then
place the wire and tweeter through the tweeter flange, front angle ring, and into the panel.
Next place the wire through the back angle ring (fits through the longer mounting nut), place
the back angle ring over the rear of the tweeter, and line-up the narrow part of the front
angle ring for the preferred angle of operation. Place the wire through the longer mounting
nut and loosely tighten the mounting nut around the tweeter. Rotate all the parts in unison
until the tweeter is angled in the desired direction. Secure the assembly by tightening the
longer mounting nut. See Figure 4.
F uig re 1
Sail
Panel
D roo
P anel
Dash
A-Pillar
Kick
Panel
F c o oa t ry Locati n
in anel Door P
2008 KS Tweeters 4in1 a01.qxp 11/29/2007 4:09 PM Page 2
4 5
KSTWEETERS
INSTALLATION
PERFORMANCE
F uig re 5
Wiring
Hooking up your Kicker KS tweeters is easy. Mount the external crossover in a location free
and clear of water and mechanical components of the vehicle with the enclosed phillips-
head wood screws. There are two lengths of wire attached to each end of the KS Series
Tweeter Crossover. The gray wire is positive and the black wire is negative. One set of wires
is labeled “INPUT” and is used to connect the source unit or amplifier to the crossover. The
other set of wires is labeled “KS TWEETER” and is intended to connect to the wires coming
off of the tweeter with the included red butt connectors. See Figure 5.
KS13
1/2 (13)
Kaladex
Neodymium
4 (3)
150 (75)
92
4500-21K
9/16 (14)
1 9/16 (4.0)
12, 4500
KS25
1 (25)
Aluminum
Neodymium
4 (3)
300 (150)
94
3500-20k
13/16 (21)
1 15/16 (4.9)
18, 4000
Performance
Model:
Tweeter Size, in (mm)
Dome Material
Magnet Type
Impedance ohms, Rated (DC Resistance)
Power Handling Watts, Peak (RMS)
Sensitivity [SPLo], dB @ 1W, 1m
Effective Frequency Range, Hz
Flush Mount Tweeter Depth, in (mm)
Flush Mount Tweeter Hole Diameter, in (cm)
High Pass, dB, at Frequency, Hz
KS20
3/4 (20)
Titanium
Neodymium
4 (3)
190 (95)
92
4500-21k
9/16 (14)
1 9/16 (4.0)
12, 4500
Note: All specifications and performance figures are subject to change. Please visit the www.kicker.com for the most current information.
To get the best performance from your new Kicker speakers, we recommend using genuine Kicker Accessories and Wiring.
Please allow two weeks of break-in time for the speaker to reach optimum performance.
Angle ntd Mou
Longer
Mounting Nut
Back
Angle Ring
F or nt
Angle Ring
Panel
Tweeter
Flange
Tweeter
F uig re 4
Pro Tip: You are one Kicker Loaded-Subwoofer enclosure, one ZX Mono-Amplifier and a few cables away from a slammin’
system! The Kicker ZX line of mono-amplifiers make it easy to upgrade to solid bass with your existing or stock source unit.
Please ask your dealer about the Kicker Comp and CompVR Subwoofer upgrades.
KS
Tweeter
K S Series
C or ss erov
S r eou c Unit li ier or Amp f
+-
+
-
-
+
Red Butt
Connec ot rs
Wiring TweetersAdditional
Modern high performance tweeters have a lower DC Resistance than what used to be
available. The Kicker KS-Series tweeters are rated at four ohms and work with any source
unit or amplifier designed to operate at a four ohm load. If you want to add additional KS-
Series tweeters to your existing component, coaxial, or tweeter system, on each channel of
your source unit or amplifier wire the tweeter crossover in series as shown below. This will
add more high frequency response while improving the sound quality, lowering the total
harmonic distortion, and decreasing the thermal load at the source unit or amplifier. This
may prevent an amplifier from shutting down due to over-current protection circuitry.
F uig re 6
S r eou c Unit li ier or Amp f
KS
Tweeter
INPUT OUTPUT to
KS Tweeter
Red Butt
Connec ot rs
Series
Wiring
+
-
+
-
+
-
+
-
+
-
+
-
Red Butt
Connec ot rs
KS
Tweeter
INPUT OUTPUT to
KS Tweeter
2008 KS Tweeters 4in1 a01.qxp 11/29/2007 4:09 PM Page 3

Specyfikacje produktu

Marka: Kicker
Kategoria: głośnik
Model: KST254

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kicker KST254, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Kicker

Kicker

Kicker 51KM614FL Instrukcja

9 Października 2024
Kicker

Kicker 51KMTCXL65 Instrukcja

9 Października 2024
Kicker

Kicker 51KMTCXL65W Instrukcja

9 Października 2024
Kicker

Kicker 48KMXL8 Instrukcja

6 Października 2024
Kicker

Kicker 46KMFC8 Instrukcja

6 Października 2024
Kicker

Kicker 40PS44 Instrukcja

6 Października 2024
Kicker

Kicker KSS369 Instrukcja

3 Października 2024
Kicker

Kicker KSS269 Instrukcja

2 Października 2024
Kicker

Kicker PS44 Instrukcja

1 Października 2024
Kicker

Kicker KSC35 Instrukcja

27 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024