Instrukcja obsługi Kern TGD 50-3C
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kern TGD 50-3C (3 stron) w kategorii waga. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/3
KERN & Sohn GmbH
Ziegelei 1
D-72336 Balingen
E- -Mail: info@kern sohn.com
Tel.: +49- - -0 [0]7433 9933
Fax: 9933 149 - -+49 [0]7433 -
internet: - www.kern sohn.com
Operating manual
Electronic Carat Pocket Scales
KERN TGD
Version 1.0
2018-06
GB
TGD-BA-e- 1810
TGD- -e- 2BA 1810
GB
KERN TGD
Version 1.0 2018-06
Operating manual
Electronic Carat Pocket Scales
1. Technical data
KERN D - TG 50 3C
Item no./ Type
TTGD - -A 50 3C
Readability (d) 0.001 g / 0.005 ct
Weighing range (max) 50 g / 250 ct
Adjustment weight, not added (class)
50 g (F2)
Operating temperature + 10° C .... + 30° C
Humidity of air max 80% air humidity (non -condensing)
Automatic cut after 300 seconds-off
Batteries 4 x 1.5 V AAA (Running time rating 150 hrs)
2. Scope of delivery
•
Pocket scale
•
Weighing pan
•
Power cable
•
Balance cover •
Batteries (4 x 1.5 V AAA) •
Operating manual
3. Keyboard overview
ON/OFF
Switch on/off
MODE Switch- over weighing unit
TARE Taring / Setting to zero
PCS Parts counting
4. Operation
Weighing:
Place the balance on a firm, level surface. Level balance with foot
screws until the air bubble of the water balance is in the prescribed
circle. Check levelling regularly
To switch on, press ON/OFF button, the balance completes a self check. As soon as the weight
display appears, the balance is ready for weighing. If required, set to zero by using TARE button.
Place load on pan and read the weighing result.
Use the MODE button to switch over into the available weighing settings.
Taring:
Place the empty weighing container.
Press the TARE button, the zero display disappears.
Weigh the material, the net weight will be indicated.
When the balance is unloaded the saved taring value is displayed with negative sign.
To delete the stored tare value, remove load from weighing pan and press the TARE button.
3 D- -e- TG BA 1810
Parts counting:
In weighing mode press PCS button, the balance changes into the counting mode.
Place the reference
Keep the PCS been button pressed, the currently set reference quantity is displayed.
Use the button to set the quantity of the placed reference (selectable 25, 50, 75, 100) and MODE
acknowledge with PCS button.
Remove reference.
If necessary, tare the empty balance container.
Place counted pieces on pan and read the quantity of pieces.
Use MODE button to return to the weighing mode.
5. Adjustment
Arrange adjustment weight (see chap. 1).
Info about adjustment weights can be found on the Internet at: http://www.kern-sohn.com
Ensure that there are no objects on the weighing pan.
In weighing mode keep the button pressed until MODE <CAL> appears.
Press the button again and wait until the weight value of the required adjustment weight MODE
will appear flashing.
Place adjustment weight. Wait until >, followed by the weight value of the placed <PASS
adjustment weight will be displayed. After that the adjustment will be finished successfully.
In case of a diverging display the adjustment has failed. Repeat adjustment process.
6. Important Notes
• Do not overload balance.
• The occurrence of electromagnetic fields may result in major display deviations. Then change
location.
• Avoid high air humidity, vapours and dust.
• Do not bring the balance directly in contact with liquids.
• Do not leave permanent load on the weighing pan.
• Never operate balance in explosive environment. The serial version is not explosion protected.
• Check the balance regularly with external test weights.
• Warranty claims will be voided when the housing is opened.
7. Error messages
Capacity of batteries exhausted, change batteries
Adjustment required, see chap. 5
The placed weight exceeds the capacity of the balance. Reduce load.
Place the balance on a firm, level surface and level it.
8. Declaration of conformity
The current EC/EU Conformity declaration can be found online in:
www.kern-sohn.com/ce
Specyfikacje produktu
| Marka: | Kern |
| Kategoria: | waga |
| Model: | TGD 50-3C |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Kern TGD 50-3C, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje waga Kern
10 Września 2024
10 Września 2024
10 Września 2024
10 Września 2024
10 Września 2024
10 Września 2024
10 Września 2024
10 Września 2024
10 Września 2024
9 Września 2024
Instrukcje waga
- waga Beurer
- waga Sanitas
- waga Xiaomi
- waga Gorenje
- waga Tefal
- waga SilverCrest
- waga Withings
- waga Nedis
- waga Medion
- waga Black & Decker
- waga Adler
- waga Marquant
- waga Toshiba
- waga Tesla
- waga Domo
- waga Conair
- waga Ardes
- waga Orbegozo
- waga Blaupunkt
- waga Grundig
- waga Hyundai
- waga Mesko
- waga Concept
- waga ECG
- waga TFA
- waga Zelmer
- waga Medisana
- waga Create
- waga Tanita
- waga Melissa
- waga Beper
- waga Izzy
- waga Velleman
- waga Witt
- waga Manta
- waga Pyle
- waga Eta
- waga Camry
- waga Scarlett
- waga Nevir
- waga TriStar
- waga Digi
- waga Clatronic
- waga Tronic
- waga Inventum
- waga Innoliving
- waga Hama
- waga Taylor
- waga Terraillon
- waga VOX
- waga Gemini
- waga Lanaform
- waga Sencor
- waga ADE
- waga Etekcity
- waga Grunkel
- waga Becken
- waga Haeger
- waga Vitek
- waga Maestro
- waga Ecomed
- waga Salter
- waga OBH Nordica
- waga Optimum
- waga ACME
- waga Korona
- waga Saturn
- waga Jata
- waga Logik
- waga Profilo
- waga Termozeta
- waga Eldom
- waga Maxxmee
- waga GOTIE
- waga Soehnle
- waga Escali
- waga Under Armour
- waga Exacta
- waga Ufesa
- waga Imetec
- waga Gerlach
- waga AWS
- waga Active Era
- waga Xavax
- waga Balance
- waga Dexford
- waga Barazzoni
- waga Waves
- waga Guardo
- waga Mybeo
- waga Mettler-Toledo
- waga Satex
- waga W8 Brunner Gasflesweegschaal
- waga ATP
Najnowsze instrukcje dla waga
13 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
12 Stycznia 2025
12 Stycznia 2025
24 Października 2024
15 Października 2024
15 Października 2024