Instrukcja obsługi Kathrein HDS 166 plus

Kathrein odbiornik satelitarny HDS 166 plus

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kathrein HDS 166 plus (12 stron) w kategorii odbiornik satelitarny. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
1 / 12
Antenna Sets for Satellite Reception
About This Guide
This document is part of the product.
►Read these instructions for use before the initial use of the antenna set.
►Perform all operating steps described in the manuals in the specifi ed sequence.
Keep these instructions for future reference. Pass them on to any new owners when selling or transferring
the unit.
For the most up-to-date version of this document, go to www.kathrein-ds.com.
Intended Use
The antenna sets HDS 166 and HDS 166 plus are suited for manually adjustable satellite reception.
If they are used in any other way or if the provisions of this document are disregarded, the guarantee and warranty will
become void.
HDS 166 20310052
HDS 166 plus 2030000002
2 / 12
Scope of Delivery
HDS 166 HDS 166 plus
■BAS 66 Skew planar antenna and instructions for use
■Sat tripod mast with 3 securing pegs and carry bag
■Adapter joint, star grip screws pre-mounted
■Coaxial cable with pre-assembled F-type conn., 15m
■Instructions for use for HDS 166 / HDS 166 plus
■Carry bag for antenna and accessories
■BAS 66 Skew planar antenna and instructions for use
■Sat tripod mast with 3 securing pegs and carry bag
■Adapter joint, star grip screws pre-mounted
■Coaxial cable with pre-assembled F-type conn., 15m
■Instructions for use for HDS 166 / HDS 166 plus
■Carry bag for antenna and accessories
■HDZ 66 Skew elevation indicator
■CAP converter V2
■12 V connection cable
■Button
■UFZ 132 WLAN USB adapter
Transport and Storage
►Transport and store the device only in the permitted temperature range between -25 and +55 °C.
For HDS 166 plus, the permitted temperature range of the CAP converter V2 and UFZ 132 is between +5 and +40 °C.
►After the original packaging has been opened, it is possible to use the enclosed carry bags for storage and transpor-
tation.
Selecting the Antenna Location
Select a location for the sat tripod mast from which the antenna has a clear line of sight to the satellite.
Risk of injury due to the sat tripod mast with the attached satellite antenna and antenna cable! Trip hazard!
►Position the sat tripod mast and lay the antenna cable in such a way that neither you nor anyone else
can trip over it or be obstructed or put at risk in any way.
Installing the Antenna Set
Erecting the sat tripod mast (unfolding, aligning and securing the sat
tripod mast)
1. Loosen the star grip screw ( in Fig. 1).①
2. Fold out the legs of the sat tripod mast. To do this, push the ⑤
joint head downwards until the struts are horizontal.② ③
3. Tighten the star grip screw.
4. Position the sat tripod mast at its chosen location.
5. Align the sat tripod mast such that the mast tube is vertical.④
Risk of injury due to the sat tripod mast tipping over in
a strong wind!
►Be sure to drive the securing pegs su ciently fi rmly into
the ground to provide an anchor.
6. Secure the sat tripod mast using the securing pegs supplied. Do
this by inserting the securing pegs into the ground through the
holes in the tripod mast legs ( in Fig. 2).Ⓐ
1
4
5
5
5
2
3
3
Fig. 1: Mast tube and legs
A
Fig. 2: Holes in the tripod mast legs
3 / 12
Preparing the extension
1. Loosen the star grip screw ( in Fig. 3).Ⓒ
2. Pull the extension out until two engagement pin holes are Ⓓ
visible.
3. Insert the engagement pin su ciently far into the lower of the
two holes until both grooves are engaged with the tube wall, see
Fig. 4.
D
B
C
Fig. 3: Mast tube and
extension
Fig. 4: Correct position
of the engage-
ment pin
Mounting the adapter joint
1. Fit the adapter joint on the mast tube as shown in Fig. 5.
2. Tighten the star grip screw ( in Fig. 5).①
1
Fig. 5: Adapter joint
Fitting the antenna and extending the extension to the required height
1. If you want to use the HDZ 66 inclinometer, it has to be installed now as described in the enclosed instructions.
Alignment of the BAS 66 Skew antenna using the HDZ 66 inclinometer is only possible in connection
with the CAP converter V2 included with the HDS 166 plus or an alphatronics SL line TV with a Kathrein
control.
2. Mount the BAS 66 Skew antenna on the adapter joint as described in the enclosed instructions for use. If necessary,
request a second person to assist you to hold the antenna steady until it is clamped on to the mast.
3. With the antenna mounted, use one hand to pull out the extension to the desired height, taking care not to
exceed the maximum height.
Risk of injury due to pulling the extension completely out of the mast tube!
►Do not pull the extension out of the mast tube further than up to where the 5th pin hole is just
visible. The extension must not project more than a maximum of 62cm out of the mast tube.
4. With the other hand, insert the engagement pin su ciently far into the engagement pin hole for the desired height,
until both grooves are engaged with the tube wall (see Fig. 4).
5. Allow the extension to slowly slide down into the mast tube until the engagement pin rests on the top of the tube.
6. Align the antenna in the direction of the satellite.
7. Slightly tighten the star grip screw ( in Fig. 3).Ⓒ
Connecting the Antenna Cable (HDS 166)
Risk of injury due to the antenna cable, particularly trip hazard in darkness!
►Lay the antenna cable in such a way that neither you nor anyone else is obstructed or put at risk.
1. Connect the antenna cable to the antenna as described in the BAS 66 Skew instructions for use.
2.
Lay the antenna cable from the antenna to the receiver or to a TV set with an integrated receiver
.
3. Connect the antenna cable to the receiver as described in the receiver instructions for use.
4. Turn on the receiver and the TV set.
5. Select a channel.

Specyfikacje produktu

Marka: Kathrein
Kategoria: odbiornik satelitarny
Model: HDS 166 plus

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kathrein HDS 166 plus, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik satelitarny Kathrein

Kathrein

Kathrein CAP 500M plus Instrukcja

29 Września 2024
Kathrein

Kathrein UFE 335-S Instrukcja

26 Września 2024
Kathrein

Kathrein UFE 335 Instrukcja

26 Września 2024
Kathrein

Kathrein UFD 558 Instrukcja

26 Września 2024
Kathrein

Kathrein UFD 595 - Premiere Instrukcja

25 Września 2024
Kathrein

Kathrein CAP 310 - MobiSet 3 digital Instrukcja

25 Września 2024
Kathrein

Kathrein UFC 762 Instrukcja

25 Września 2024
Kathrein

Kathrein UFC 960 Instrukcja

25 Września 2024
Kathrein

Kathrein CAP 650 - MobiSet 3 Twin Instrukcja

25 Września 2024
Kathrein

Kathrein CAP 210 - MobiSet 2 digital Instrukcja

25 Września 2024

Instrukcje odbiornik satelitarny

Najnowsze instrukcje dla odbiornik satelitarny

Reflexion

Reflexion CarSat-65MKII Twin Instrukcja

9 Października 2024
Oyster

Oyster Vision II Instrukcja

4 Października 2024
Triax

Triax TDS 64 Instrukcja

4 Października 2024
Triax

Triax TDS 78 Instrukcja

4 Października 2024
Axing

Axing SZU 17-02 Instrukcja

1 Października 2024
Thomson

Thomson TSR600CI Instrukcja

29 Września 2024
Aston

Aston Tracsat DiSEqC gestuurde H-H motor Instrukcja

28 Września 2024
Aston

Aston SatSeeker DS 200 Instrukcja

28 Września 2024
Pure Acoustics

Pure Acoustics Dream Nano Instrukcja

28 Września 2024
Pure Acoustics

Pure Acoustics Dream Box Instrukcja

28 Września 2024