Instrukcja obsługi Kathrein HDM 141


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Kathrein HDM 141 (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
1 / 10
HDM 140 218456
HDM 141 218457
HDM 143 218458
SAT Jointed Mast
Conversion SAT Jointed Mast
The SAT jointed masts HDM 140 and HDM 141 as well as the conversion SAT jointed mast HDM 143 are designed for satel-
lite reception from mobile locations, i.e. stationary caravans or motorhomes. They are compatible with the BAS 60/66
planar antennas.
Any other use or failure to comply with these user instructions and the documentation and instructions accompanying
the equipment will void the warranty or guarantee.
Tip Keep these instructions for further reference and give them to the next owner if the jointed mast is sold.
High usability and comfort due to rotation and align-
ment of the antenna from inside the vehicle
With two fitted connecting cables and four F-type
connectors
Masts made of duralumin, swivel heads of die-cast
aluminium
Maximum speed limit: 130 km/h with a lowered
antenna
HDM 140
To mount the BAS 60/66 planar antenna on the roof of
a caravan or mobile home
With a mounting bracket and a roof seal
HDM 141
Smaller model to mount the BAS 60/66 planar antenna
on the roof of a caravan or mobile home
With a mounting bracket and a roof seal
HDM 143
To convert a terrestrial system, e.g. HD35, to the BAS
60/66 planar antenna
The roof duct bracket can continue to be used
HDM 140 HDM 141 HDM 143
Features
Intended use
2 / 10
Scope of delivery
No. Description
1
2
3
4
5
7
8
10
11
13
14
15
12
9
6
Upper part of the swivel head (antenna connection piece with gearing)
Plug for the joint axle
Joint tube
HDM 140, HDM 143: 750 mm long
HDM 141: 560 mm long
Sealing sleeve with spring
Roof duct with screws (6, 4.2x19)
Knurled nut
Cone nut (red)
Mounting bracket with automatic clamping plate and wood screws (5, 4x40)
Automatic clamping plate with spring
Star knob
Coaxial cable (2, 4 m each). One cable is marked in red on both ends.
F-type connectors (4)
Turning handle with a screw (1, M5x8)
Joint shaft
Crank handle with a screw (1, M4x12)
Please note that items to are not included in the ④ ⑩
HDM143 scope of delivery.
Reception site
To guarantee satellite reception, it is absolutely necessary to make sure that there are no obstacles between the antenna
and the satellite at the reception site. Make sure that the antenna is not shadowed by rooftop elements, such as roof
boxes, air-conditioning units, solar panels, trees, buildings, etc.
Choose a site at which the antenna has an imaginary line of sight of the satellite towards the south at an angle of 1to
55° relative to the horizon. Make sure that this line of site is not interrupted.
3 / 10
Safety instructions
DANGER
High voltage!
Danger to life when touching electrical installations.
Maintain a minimum clearance of 1 m from all other electrical devices.
WARNING
Fall hazard!
Injuries due to falling from the roof during installation.
Position the vehicle horizontally.
Wear stable shoes with non-slip soles.
WARNING
Damage or opening in the roof!
Injuries due to damage or opening in the roof.
Make sure that the vehicle roof is sufciently strong and stable. In case of doubt, contact a qualied specia-
list retailer or the manufacturer of your vehicle.
Make sure that no one is inside the caravan or mobile home under the antenna during installation.
WARNING
Slip hazard!
Injuries on the roof or climbing aid, e.g. ladder.
Make sure that the roof and climbing aid are dry, clean and non-slip.
WARNING
Trip hazard due to cables!
Trip injuries.
Lay cables in such a way that no one can tread on them or trip over them.
NOTICE
Risk of accident!
Material damage due to antenna collision with objects.
Tilt and lower the antenna before starting a journey.
Select the installation site
Select the installation site far enough from the sides of the vehicle so that the antenna does not protrude over them
when lowered down for the journey.
Tools
Tools necessary for the installation:
gimlet
le
screwdriver
handsaw
drill
circular drill bit (optional)
Tip To install the jointed mast, drill a hole of 38 mm in the roof. If your vehicle has a sloped or arched roof, we
recommend increasing the hole up to 42 mm.
Installation


Specyfikacje produktu

Marka: Kathrein
Kategoria: Niesklasyfikowane
Model: HDM 141
Wysokość produktu: 765 mm
Waga produktu: 1600 g
Wymiary opakowania (SxGxW): 1020 x 130 x 100 mm
Liczba dołączonych produktów: 1 szt.
Kompatybilność: BAS 60
Materiały: Aluminium
Średnica: 34 mm

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Kathrein HDM 141, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Kathrein

Kathrein

Kathrein VOS 137/RA 2.0 Instrukcja

5 Października 2024
Kathrein

Kathrein UFO 83 Instrukcja

28 Września 2024
Kathrein

Kathrein FAS 100 Instrukcja

21 Września 2024
Kathrein

Kathrein BZD 30 Instrukcja

20 Września 2024
Kathrein

Kathrein UFO 80 Instrukcja

19 Września 2024
Kathrein

Kathrein FRP 100 Instrukcja

14 Września 2024
Kathrein

Kathrein MS 6060 Instrukcja

13 Września 2024
Kathrein

Kathrein ZAS 41XS Instrukcja

10 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane