Instrukcja obsługi JVC HR-A433E
JVC
magnetowid
HR-A433E
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla JVC HR-A433E (33 stron) w kategorii magnetowid. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/33
CONTENTS
SAFETY FIRST 2
Safety Precautions .................................... 2
INSTALLING YOUR NEW RECORDER 3
Basic Connections ................................... 3
Tune The TV To Your Video Recorder ...... 3
Connecting/Using A Decoder
[A233E, A433E only] ............................... 4
Connecting/Using A Satellite Tuner .......... 5
INITIAL SETTINGS 6
Tuner Set .................................................. 6
Clock Set ................................................. 7
PLAYBACK 9
Basic Playback ......................................... 9
Playback Features .................................. 10
RECORDING 13
Basic Recording ..................................... 13
Recording Features ................................ 14
TIMER RECORDING 15
Information On ShowView
[except A230E, A430E] .......................... 15
Guide Prog. Number Set
[except A230E, A430E] ...................... 15
ShowView Timer Recording
[except A230E, A430E] .......................... 17
Regular Timer Programming .................. 18
Check And Cancel Programmes .......... 19
PDC/VPS Recording
[A237E, A437E only] .......................... 19
EDITING 20
Edit To Or From Another Video
Recorder ................................................ 20
Edit From A Camcorder ......................... 21
USING THE CONFIRMATION DISPLAY 22
Storing Channels Manually .................... 22
Delete A Channel .................................. 22
Change Station Channel Position ........... 22
Set Stations ............................................ 23
Fine-Tuning Channels Already Stored .... 23
TV STATION AND ID LIST 24
TROUBLESHOOTING 25
QUESTIONS AND ANSWERS 27
INDEX 28
SPECIFICATIONS 32
Unless otherwise indicated, the recorder
illustrations appearing in this instruction
manual are of the HR-A433E.
EN
ENGLISH
HR-A437E HR-A237E
HR-A433E HR-A233E
HR-A430E HR-A230E
VIDEO CASSETTE RECORDER
INSTRUCTIONS
PU30425-1847-1
PAL
q
6
SP
LP
EP
M
D
D
I T R
W
VIDEO
TV PROG
SP/LP
TIMER
OPERATE
P
R
O
G
C
H
E
C
K
T
V
V
O
L
.
OPERATE
CLOCK
CH SET
DISPLAY
DAILY
AUX
ADD TIME
C.RESET
CANCEL
DATESTOP
START
AUDIO MONITOR (MONITOR)
TV/VIDEO TV VCR
TIMER
WEEKLY
A
12
45
3
6
8
0
79
B
PUSH JOG
TV
PROG.
P
R
O
G
O
K
EXPRESS PROGRAMMING
STORE
2
1
3
2
SAFETY FIRST
Failure to heed the following precautions may result in
damage to the recorder, remote control or video
cassette.
1. DO NOT place the recorder . . .
... in an environment prone to extreme temperatures or
humidity.
... in direct sunlight.
... in a dusty environment.
... in an environment where strong magnetic fields are
generated.
... on a surface that is unstable or subject to vibration.
2. DO NOT block the recorder’s ventilation openings.
3. DO NOT place heavy objects on the recorder or remote
control.
4. DO NOT place anything which might spill on top of the
recorder or remote control.
5. AVOID violent shocks to the recorder during transport.
MOISTURE CONDENSATION
Moisture in the air will condense on the recorder when you
move it from a cold place to a warm place, or under extremely
humid conditions—just as water droplets form in the surface of
a glass filled with cold liquid. Moisture condensation on the
head drum will cause damage to the tape. In conditions where
condensation may occur, keep the recorder turned on for a few
hours to let the moisture dry.
ABOUT HEAD CLEANING
Accumulation of dirt and other particles on the video heads
may cause the playback picture to become blurred or inter-
rupted. Be sure to contact your nearest JVC dealer if such
troubles occur.
IMPORTANT
nPlease read the various precautions on this page before
installing or operating the recorder.
nIt should be noted that it may be unlawful to re-record
pre-recorded tapes, records, or discs without the consent
of the owner of copyright in the sound or video record-
ing, broadcast or cable programme and in any literary,
dramatic, musical, or artistic work embodied therein.
The rating plate and the safety caution are on the rear of the unit.
WARNING: DANGEROUS VOLTAGE INSIDE
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE.
Safety Precautions
nOnly cassettes marked "VHS" can be used with this
videorecorder.
nHQ VHS is compatible with existing VHS equipment.
nShowView is a trademark applied for by Gemstar Develop-
ment Corporation. The ShowView system is manufactured
under licence from Gemstar Development Corporation.
PAL
CAUTION
nWhen you are not using the recorder for a long period of
time, it is recommended that you disconnect the power
cord from the mains outlet.
nDangerous voltage inside. Refer internal servicing to
qualified service personnel. To prevent electric shock or
fire hazard, remove the power cord from the mains
outlet prior to connecting or disconnecting any signal
lead or aerial.
WARNING
There are two different types of SECAM colour systems:
SECAM-L, used in FRANCE (also called SECAM-West), and
SECAM-B, used in Eastern European countries (also called
SECAM-East).
1.This recorder can also receive SECAM-B colour
television signals for recording and playback.
2.Recordings made of SECAM-B television signals produce
monochrome pictures if played back on a video recorder
of SECAM-L standard, or do not produce normal colour
pictures if played back on a PAL video recorder with
SECAM-B system incorporated (even if the TV set is
SECAM-compatible).
3.SECAM-L prerecorded cassettes or recordings made with
a SECAM-L video recorder produce monochrome
pictures when played back with this recorder.
4.This recorder cannot be used for the SECAM-L standard.
Use a SECAM-L recorder to record SECAM-L signals.
For Italy:
"It is declared that this product, brand JVC, conforms to the
Ministry Decree n. 548 of 28 Aug.'95 published in the
Official Gazette of the Italian Republic n. 301 of 28 Dec.'95"
To A430E/A433E/A437E Owners:
Video tapes recorded with this video recorder in the LP
(Long Play) mode cannot be played back on a single-speed
video recorder.
The OPERATE button does not completely shut off mains
power from the unit, but switches operating current on and
off.
3
Basic
Connections CHECK CONTENTS
1
Make sure the package contains all of the accessories
listed in “Specifications” (Z pg. 32).
SITUATE RECORDER
2
Place the recorder on a stable, horizontal surface.
CONNECT RECORDER TO
TV
3
The connection method you use depends on the type
of TV you have.
RF CONNECTION
●
To Connect To A TV With NO AV Input Terminals . . .
a– Disconnect the TV aerial cable from the TV.
b– Connect the TV aerial cable to the ANT. IN jack
on the rear panel of the recorder.
c– Connect the provided RF cable between the RF
OUT jack on the rear panel of the recorder and
the TV’s aerial terminal.
** Before operating the recorder, make sure the TV’s
channel is set to the VIDEO channel.
AV CONNECTION
●
To Connect To A TV With AV Input Terminals . . .
a– Connect the aerial, recorder and TV as per “RF
CONNECTION”.
b– Connect an optional SCART cable between the
AV1 IN/OUT socket on the rear panel of the
recorder and the TV’s 21-pin SCART connector.
c– Set the RF TEST switch to OFF.
Before operating the recorder, make sure the TV is set
to the VIDEO (or AV) mode.
CONNECT RECORDER TO
MAINS
4
Plug the end of the mains power cord into a mains
outlet.
It's essential that your video recorder be properly connected.
Follow these steps carefully. THESE STEPS MUST BE COM-
PLETED BEFORE ANY VIDEO OPERATION CAN BE PER-
FORMED.
INSTALLING YOUR NEW RECORDER
21-pin SCART Cable
Aerial
terminal
Mains Power
Cord
RF Cable
(provided)
21-pin SCART
connector
Mains outlet
Back of Recorder
RF output
channel
adjustment
screw
TV Aerial
Cable
Back of TV
Tune The TV
To Your Video
Recorder
TURN ON THE RECORDER
1
Press OPERATE.
SELECT OUTPUT MODE
2
Set the RF TEST switch on the back of the recorder to
ON.
The video recorder sends picture and sound signals via the RF
connecting cable to your TV on UHF channel 36.
CONTINUED ON NEXT PAGE.
RF TEST switch
AV1 IN/OUT
Specyfikacje produktu
| Marka: | JVC |
| Kategoria: | magnetowid |
| Model: | HR-A433E |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z JVC HR-A433E, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje magnetowid JVC
13 Września 2024
20 Sierpnia 2024
5 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
3 Lipca 2024
3 Lipca 2024
3 Lipca 2024
Instrukcje magnetowid
- magnetowid Sony
- magnetowid Samsung
- magnetowid Tenda
- magnetowid Motorola
- magnetowid TP-Link
- magnetowid Philips
- magnetowid Bosch
- magnetowid Hikvision
- magnetowid EZVIZ
- magnetowid Canon
- magnetowid Reolink
- magnetowid TRENDnet
- magnetowid Toshiba
- magnetowid D-Link
- magnetowid Imou
- magnetowid Grundig
- magnetowid Tripp Lite
- magnetowid Moxa
- magnetowid Synology
- magnetowid Digitus
- magnetowid Dahua Technology
- magnetowid DataVideo
- magnetowid Vivotek
- magnetowid Speco Technologies
- magnetowid Planet
- magnetowid Aiwa
- magnetowid LevelOne
- magnetowid Axis
- magnetowid Milesight
- magnetowid Abus
- magnetowid Ubiquiti Networks
- magnetowid QNAP
- magnetowid Hitachi
- magnetowid Ernitec
- magnetowid Hanwha
- magnetowid Grandstream
- magnetowid Foscam
- magnetowid Monacor
- magnetowid Daewoo
- magnetowid Kunft
- magnetowid UniView
- magnetowid Acti
- magnetowid Sylvania
- magnetowid Magnum
- magnetowid GeoVision
- magnetowid Seagate
- magnetowid Provision ISR
- magnetowid Digital Watchdog
- magnetowid DirecTV
- magnetowid Skytronic
- magnetowid Magnavox
- magnetowid Inkovideo
- magnetowid Mach Power
- magnetowid Avigilon
Najnowsze instrukcje dla magnetowid
15 Października 2024
10 Października 2024
9 Października 2024
9 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
5 Października 2024
5 Października 2024